Aeotec Z-Pi 7 Bedienungsanleitung

03/02/2021 Z-PI 7 User Guide : Aeotec Help Desk

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide- 1/7

Z-Pi 7 user guide.

Modiﬁed on: Mon, 2 Nov, 2020 at 4:47 PM

Aeotec Z-Pi 7 was developed to control actuators and sensors in a Z-Wave Plus Network as a self-powered Z-Wave®

GPIO Adapter. It's powered by (https://aeotec.com/z-wave-home-automation/z-wave-gen7.html)

700

(

ttps

://

utom

-700-

)



G

(

ttps

://

utom

)

technology utilizing

(

ttps

://

utom

)



integration and

(

ttps

://

2/)

security.

The technical specifications of Z-Pi 7 (https://aeotec.freshdesk.com/a/solutions/articles/6000230553) can be viewed at

that link.

now

your

omp

ick

diffe

700

omp

ick

ous

500

you

lea

mor

eadi

able

age

https://aeotec.com/z-wave-home-automation/development-kit-pcb.html (https://aeotec.com/z-

wave-home-automation/development-kit-pcb.html)

03/02/2021 Z-PI 7 User Guide : Aeotec Help Desk

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide- 2/7

mport

afe

orm

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec

Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller

will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in

other materials.

Keep product away from open flames and extreme heat. Avoid direct sun light or heat exposure.

Z-Pi 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and / or wet locations.

ick

The following will step you through using Z-Pi 7 when it is attached to a host controller (Raspberry Pi or Orange Pi

Zero) as a primary controller.

Please make sure the host controller is pre-installed; this includes any drivers that the corresponding OS may need.

1. Connect Z-Pi 7 to a host controller. The following diagrams show how to install the Z-Pi on each system.

1.1. Install Z-Pi 7 on Raspberry Pi

03/02/2021 Z-PI 7 User Guide : Aeotec Help Desk

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide- 3/7

OS: Linux - Raspian "Stretch" or higher:

The Z-Pi7 uses the same port as Bluetooth. To use Z-Pi 7, you must deactivate Bluetooth.

1.1.1. Open an SSH connection to your system, use Putty (Link

(https://www.chiark.greenend.org.uk/~sgtatham/putty/)), you can find out how to connect Putty to RPi in this

link: SSH Putty to RPi (https://raspberrypi4dummies.wordpress.com/2013/03/17/connect-to-the-raspberry-pi-via-ssh-

putty/).

1.1.2. Enter the user "pi".

1.1.3. Enter your password "raspberry"(standard).

1.1.4. Now enter the following command.

sudo nano /boot/config.txt

1.1.5. Add the following line depending on the hardware version of RPi that you are using.

Raspberry Pi 3

dtoverlay=pi3-disable-bt

Raspberry Pi 4

dtoverlay=disable-bt

1.1.6. Exit the Editor with Ctrl X and save with Y.

1.1.7. Reboot the system with:

sudo reboot

1.1.8. Login with SSH again, enter your username and password.

1.1.9. Check if the port ttyAMA0 is available with:

dmesg | grep tty

03/02/2021 Z-PI 7 User Guide : Aeotec Help Desk

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide- 4/7

1.2. Install Z-Pi 7 on Orange Pi Zero

OS: Linux - Armbian:

To use Z-Pi 7 with Orange Pi Zero the port must be activated.

1.2.1. Open an SSH connection to your system, use Putty (Link

(https://www.chiark.greenend.org.uk/~sgtatham/putty/)), you can find out how to connect Putty to RPi in this link: SSH

Putty to RPi (https://raspberrypi4dummies.wordpress.com/2013/03/17/connect-to-the-raspberry-pi-via-ssh-putty/).

1.2.2. Enter the user "root" (standard at first connection).

1.2.3. Enter your Password.

1.2.4. Now enter the following command.

HTML

armbian-config

1.2.5. In the opened menu, go to the item system and press OK.

1.2.6. Go to Hardware and press OK

03/02/2021 Z-PI 7 User Guide : Aeotec Help Desk

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide- 5/7

1.2.7. Highlight "uartl" and press Save.

1.2.8. reboot the System

1.2.9. Login with SSH again, enter your username and password.

1.2.10. Check if the port /dev/ttyS1 is available with:

03/02/2021 Z-PI 7 User Guide : Aeotec Help Desk

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide- 6/7

ls -la /dev/ttyS*

2. Open your selected third party software.

3. Following your third party software instructions for connecting a Z-Wave USB adapter. Select the COM or virtual port

Z-Pi 7 is associated to.

In most cases, any devices already paired with Z-Pi 7 network will automatically show up in the software's interface.

ced

nout

Below are the pin outs for the Z-Pi 7.

ddi

twor

This must be done through the host software which takes control of Z-Pi 7. Please consult the instruction manual

of the host software to add the Z-Pi 7 to a pre- existing Z-Wave network (i.e. “Learn”, “Sync”, “Add as Secondary

Controller”, etc.).

This function can only be performed through a compatible host software.

your

Z-Pi also can be reset to the factory defaults settings via the host software (host software can be any third party

software such as: Homeseer, Domoticz, Indigo, Axial, etc).

The host software must take control of Z-Pi.

Find the Reset Z-Wave controller option in your third party software.

03/02/2021 Z-PI 7 User Guide : Aeotec Help Desk

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide- 7/7

Inhaltsverzeichnis

Andere Aeotec Controller Handbücher

Aeotec

Aeotec GEN5 Bedienungsanleitung

Aeotec

Aeotec WallSwipe Bedienungsanleitung

Aeotec

Aeotec Zi-Stick Bedienungsanleitung

Aeotec

Aeotec WallMote Bedienungsanleitung

Aeotec

Aeotec Nano Shutter Bedienungsanleitung

Aeotec

Aeotec Nano Shutter ZW141 Bedienungsanleitung

Aeotec

Aeotec WallMote Bedienungsanleitung

Aeotec

Aeotec Nano Dimmer Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch