Aeotec Dual Nano Switch ZW132 Bedienungsanleitung

View the expanded manual:

http://aeotec.com/support

Dual Nano Switch

IMPORTANT!

This product has been fully tested and certified to

work with Z-Wave by the Z-Wave Alliance. It is

crafted using Z-Wave Plus, the latest device version

of Z-Wave. As such, if the product does not work

with your gateway, please be sure to check with your

gateway manufacturer that they have integrated this

device with their gateway for full operation.

Aeotec by Aeon Labs Dual Nano

Switch.

Aeotec Dual Nano Switch is a low-cost Z-Wave

Switch specically used to enable Z-Wave command

and control (on/off) of any wall switches. It can report

immediate wattage consumption or kWh energy

usage over a period of time. In the event of power

failure, non-volatile memory retains all programmed

information relating to the unit’s operating status.

It can connect to 2 external manual switches to

control the load ON/OFF independently. Its surface

has a pin socket, which can be used for connecting

to the touch panel, so you can also use the touch

panel to control the Dual Nano Switch.

The Dual Nano Switch is also a security Z-Wave

device and supports Over The Air (OTA) feature for

the products rmware upgrade.

Z-Wave and Z-Wave Plus are

registered trademarks of Sigma

Designs and its subsidiaries in the

United States and other countries

FCC ID: XBAFT132

Certications (regional):

Version: 501013200001-AA www.aeotec.com

Contact your local government for information

regarding the collection systems available.

231

(Front)

Action Button

Touch panel connection port

RGB LED

RF antenna

Fastening screws

Familiarize yourself with your Dual

Nano Switch.

(Back)

(Bottom)

Wire connection

port

Do not dispose of electrical appliances as unsorted

municipal waste, use separate collection facilities.

Warning

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

Consul the dealer or an experienced radio/TV

technician for help.

UL NOTICE (For USA).

Install only in a UL listed junction box sized

3×2×2.75 inch (75×50×70 mm) or larger,

minimum volume 14 in (230 cm ).

Use Copper Conductors Only.

“CAUTION – Risk of Electric Shock – More than

one disconnect switch may be required to de-

energize the equipment before servicing”.

“WARNING - This device shall not be used in

combination with a wall switch controlling a

receptacle.”

3 3

330

N – Power input for neutral

L – Power input for live

IN – Input for load power supply

OUT1 – Output for load 1

OUT2 – Output for load 2

S1 – External switch control for load 1

S2 – External switch control for load 2

Notes for the wire connection ports:

Touch panel

LN IN OUT1 OUT2 S1 S2

found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses and can radiate radio frequency energy

and, if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur in

a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

429

Install the Dual Nano Switch.

1. Shut off the main circuit breaker of your home for

safety during the installation and ensure the wires

are not short circuited during the installation which

will cause damage to the Dual Nano Switch.

Important: A licensed electrician with knowledge

and understanding electrician systems and electrical

safety should complete the electrical installation.

Note: Your home’s main circuit breaker must support

the overload protection for safety.

FCC NOTICE (for USA)

THE MANUFACTURER IS NOT RESPONSIBLE

FOR ANY RADIO OR TV INTERFERENCE CAUSED

BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.SUCH MODIFICATIONS COULD

VOID THE USER’S AUTHORITY TO OPERATE THE

EQUIPMENT.

STORE INDOORS WHEN NOT IN USE. SUITABLE

FOR DRY LOCATIONS. DO NOT IMMERSE

IN WATER. NOT FOR USE WHERE DIRECTLY

EXPOSED TO WATER.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference,

and

This device must accept any interference received,

including interference that may cause undesired

operation. This equipment has been tested and

Cut wire if neccessary

0.27"

(5mm)

Strip Gage (measure barehere)

Preparing connection wires

14 AWG power wires for Input/ Output.

18 AWG copper wires for external manual switch.

Use the wire stripper cut the metallic part of the

connection wire and make sure the length of the

metallic part is about 5mm.

Note: All connection wires needs to be exible cable.

USE OF THE PRODUCTS, WHETHER BASED

ON NEGLIGENCE, STRICT LIABILITY, BREACH

OF WARRANTY, BREACH OF AGREEMENT, OR

EQUITABLE PRINCIPLES, IS EXPRESSLY LIMITED

TO, AT AEON LABS' OPTION, REPLACEMENT

OF, OR REPAYMENT OF THE PURCHASE

PRICE FOR THAT PORTION OF PRODUCTS

WITHRESPECT TO WHICH DAMAGES ARE

CLAIMED. ALL CLAIMS OF ANY KIND ARISING

IN CONNECTION WITH THIS AGREEMENT OR

THE SALE OR USE OF PRODUCTS SHALL BE

DEEMED WAIVED UNLESS MADE IN WRITING

WITHIN THIRTY (30) DAYS FROM AEON LABS'

DELIVERY, OR THE DATE FIXED FOR DELIVERY IN

THE EVENT OF NONDELIVERY. THE INDEMNITY

AND WARRANTY IN ABOVE ARE EXCLUSIVE

AND IN LIEU OF ALL OTHER INDEMNITIES

OR WARRANTIES, WHETHER EXPRESS OR

IMPLIED, INCLUDING THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

627

Wiring diagram of AC120V/230V power input.

LTouch

panel

Live

Neutral

AC120V~230V

N IN OUT1 OUT2 S1 S2

or relating to any actual or alleged infringement or

misappropriation of any patent, trademark, mask

work, copyright, trade secret or any actual or alleged

violation of any other intellectual property rights

arising from or in connection with the products,

except to the extent that such infringement exists as

a result of Aeon Labs' manufacturing processes.

IN NO EVENT SHALL AEON LABS BE LIABLE

FOR ANY INDIRECT, INCIDENTAL, PUNITIVE,

SPECIAL OR CONSEQUENTIAL DAMAGES, OR

DAMAGES FOR LOSS OF PROFITS, REVENUE,

OR USE INCURRED BYCUSTOMER, COMPANY

OR ANY THIRD PARTY, WHETHER IN AN ACTION

IN CONTRACT, OR TORT, OR OTHERWISE

EVENIF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. AEON LABS' LIABILITY AND

CUSTOMER'S EXCLUSIVE REMEDY FOR ANY

CAUSE OF ACTION ARISING IN CONNECTION

WITH THIS AGREEMENT OR THE SALE OR

726

Touch

panel

Live

Neutral

AC120V~230V

DC 24V

In some cases, you may have some loads just only

can be used on the voltage of DC24V and hope that

it still can be controlled by the Dual Nano Switch, so

please refer to the following diagram to achieve this:

NIN OUT1 OUT2S1 S2

Note: The “IN” terminal should be connected to the

“-” of DC 24V input.

needs, Company must prepay shipping and

transportation charges for returned Products, and

insure the shipment or accept the risk of loss or

damage during such shipment and transportation.

Aeon Labs will ship the repaired or replacement

products to Company freight prepaid.Customer

and Company shall indemnify, defend, and hold

Aeon Labs and Aeon Labs' afliates, shareholders,

directors, officers, employees, contractors,

agents and other representatives harmless from

all demands, claims, actions, causes of action,

proceedings, suits, assessments, losses, damages,

liabilities, settlements, judgments, fines, penalties,

interest, costs and expenses (including fees and

disbursements of counsel) of every kind (i) based

upon personal injury or death or injury to property

to the extent any of the foregoing is proximately

caused either by a defective product (including strict

liability in tort) or by the negligent or willful acts or

omissions of Customer or its officers, employees,

subcontractors or agents, and/or (ii) arising from

825

Wiring diagram of DC24V power input.

Since the Dual Nano Switch also supports the

DC24V power input, so you can use it to control the

loads that powered by DC24V.

LN IN OUT1OUT2 S1 S2 Touch

panel

DC 24V

Any repairs under this warranty must be conducted

by an authorized Aeon Labs service representative

and under Aeon Labs' RMA policy. Any repairs

conducted by unauthorized persons shall void this

warranty.

Excluded from the warranty are problems

due to accidents, acts of God, civil or military

authority, civil disturbance, war, strikes, res, other

catastrophes, misuse, misapplication, storage

damage, negligence, electrical power problems, or

modication to the Products or its components.

Aeon Labs does not authorize any person or party

to assume or create for it any other obligation or

liability in connection with the Products except as

set forth herein. Aeon Labs will pass on to Company

all manufacturers’ Material warranties to the extent

that they are transferable, but will not independently

warrant any Material. Company will assist Customer

with all warranty, repair, return and technical support

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Aeotec Schalten Handbücher

Aeotec

Aeotec Smart Switch 7 Bedienungsanleitung

Aeotec

Aeotec Smart Switch 7 Bedienungsanleitung

Aeotec

Aeotec Smart Home Hub Bedienungsanleitung

Aeotec

Aeotec NanoMote Quad Bedienungsanleitung

Aeotec

Aeotec ZW139 Bedienungsanleitung

Aeotec

Aeotec ZW096 Bedienungsanleitung

Aeotec

Aeotec AEOEZW116 Bedienungsanleitung

Aeotec

Aeotec DSC18103-ZWEU Bedienungsanleitung

Aeotec

Aeotec Smart Switch 6 Bedienungsanleitung

Aeotec

Aeotec Smart Switch 6 Bedienungsanleitung

Aeotec

Aeotec Dual Nano Switch Series Bedienungsanleitung

Aeotec

Aeotec ZWA003-S Bedienungsanleitung

Aeotec

Aeotec AEOEZW140 Bedienungsanleitung

Aeotec

Aeotec Smart Switch 7 Bedienungsanleitung

Aeotec

Aeotec AEOEZW132 Bedienungsanleitung

Aeotec

Aeotec WallMote Bedienungsanleitung

Aeotec

Aeotec ZW116 Bedienungsanleitung

Aeotec

Aeotec NanoMote Quad Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch