Aerus Mobile Bedienungsanleitung

Portable Electronic Purier

READ MANUAL CAREFULLY FOR PROPER PROCEDURES AND OPERATION.

2017 Space Technology

Hall of Fame Inductee

CONTENTS

Specifications ................................2

Important Safety Instructions .................3

Parts and Accessories.........................4

Control Pad Layout ...........................5

Operation ....................................5

Mounting the Base ...........................5

Adjusting the Wire Stand .....................6

Wire Stand Positions..........................6

12VDC Adapter Fuse..........................6

Power Adapters ..............................7

Portability....................................7

Disassembly..................................8

Assembly ....................................9

Yearly Maintenance...........................9

Cleaning ....................................10

Troubleshooting.............................10

PRODUCT OVERVIEW

Congratulations, you have purchased one of the most effective, technologically advanced mobile air purifiers

available. Your new Aerus Mobile is

designed to provide clean, healthy air for your car, truck, RV, or camper

by reducing airborne contaminants, odors and pollutants. Be sure to read and follow all service procedures

outlined in this owner’s

manual, and use only genuine Aerus replacement parts available from your

Independent Distributor/Contractor.

DID YOU FORGET TO REGISTER YOUR AERUS MOBILE?

By registering, you’ll activate your warranty. Your privacy is guaranteed. Just fill out your warranty card and

drop it in the mail.

If you have any questions concerning this, or any Aerus product, contact your

Independent Distributor/Contractor or Aerus Customer Service at 800.243.9078

(U.S.) or 800.668.0763 (CANADA).

GENERAL INFORMATION

SPECIFICATIONS

Electrical:

• 12VDC or 110 - 240 VAC 50/60Hz

• Fuse (12V DC adapter only): 2 Amp Buss type

• Maximum 10.7 Watts

Operating Temperature:

• 45˚F - 100˚F (7˚C - 38˚C)

Technology

• ActivePure® Technology

• Fixed 8.5 KV DC needle ion generator

Mechanical:

• 3 Speed Fan

Dimensions:

• 3.625”x 6”x 1.0”

(9.21cm x 15.25cm x 2.54cm w/o base)

Weight:

• 8 ounces (.23kg)

Warranty:

• Limited (1) year

Please record the name and phone number of your Independent Distributor/Contractor. here, and

retain it for future reference.

Name ____________________________________________________________________________

Phone ____________________________________________________________________________

Serial # ___________________________________________________________________________

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

Not for use on 12 volt positive ground or 24 volt vehicles. Doing so may damage

the product.

WARNING:

UV Lamp operation. Do not operate this unit unless the case is completely and

correctly assembled. Failure to comply may result in serious eye damage.

CAUTION:

Do not operate unit near heat sources, open flame, or combustible vapors or gases.

SAVE THESE INSTRUCTIONS

Read this manual in its entirety before using your Aerus Mobile.

• Disconnect power cord before servicing

• DO NOT immerse in water or other liquids

• DO NOT touch the control panel or plug with a wet hand

• DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause

an electric shock or fire, or damage the air cleaner

• To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner; DO NOT use on soft

surfaces, where openings may become blocked

• To disconnect air cleaner, turn controls to OFF, then remove plug from outlet; pull firmly on the plug,

DO NOT unplug by pulling on the cord

• Always unplug the unit before moving or cleaning, or whenever the air cleaner is not in use

• DO NOT use outdoors or on wet surfaces

• DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit, doing so will

void your warranty

• Connect to properly grounded outlets only

• To reduce the risk of electrical shock, do not change the plug in any way

CAUTION:

The unit must be disconnected from its power source before servicing, and

should not have the power reconnected unless the case is correctly and

completely reassembled.

PARTS AND ACCESSORIES

A. WIRE STAND ........................................................................9950153

B. BASE ...............................................................................9950154

C. KNOB/CLAMP PACK (2) ..............................................................9950155

D. 12VDC ADAPTER ...................................................................9950157

E. 2.0 AMP FUSE .......................................................................9950162

F. AC ADAPTER .......................................................................9950158

A. WIRE STAND 9950153

B. BASE 9950154

C. KNOB/CLAMP PACK (2) 9950155

D. 12VDC ADAPTER 9950157

E. 2.0 AMP FUSE 9950162

F. AC ADAPTER 9950158

Fuse for 12VDC Adapter only

PUSH

ORDER PART# 9950159

FRESH AIR MOBILE SERVICE KIT

ACTIVEPURE

TARGET

TARGET FRAME

Red Wires

UV BULB

ACTIVEPURE

PLATE

A. WIRE STAND 9950153

B. BASE 9950154

C. KNOB/CLAMP PACK (2) 9950155

D. 12VDC ADAPTER 9950157

E. 2.0 AMP FUSE 9950162

F. AC ADAPTER 9950158

Fuse for 12VDC Adapter only

PUSH

TARGET FRAME

ACTIVEPURE

TARGET

UV BULB

ORDER PART# 9950209

FRESH AIR MOBILE SERVICE KIT

AERUS MOBILE SERVICE KIT

2. Peel and stick one part

of the Velcro to the

base, then attach the

other to a clean, dry

surface, or...

1. Attach suction cups by

pressing and twisting

into the base, or...

3. Screws may be used

for extra security

and where the other

methods are not

appropriate.

1. If desired, mount the base in an appropriate location (see below).

2. Adjust the wire stand (see page 5).

3. Plug in either the 12VDC car adapter or the AC adapter.

4. The Aerus Mobile unit will turn on when power is supplied to the unit.

ON/OFF: When pressed, the unit turns on or off. LED above button will be lit when unit is on.

TIMER: When pressed, it turns the Timer on for 4 hours, then turns off. LED above button will be lit when

the Timer is on.

NOTE: If Timer is not pressed, the unit will operate continuously, until turned off or unplugged.

PURIFIER: Adjusts the Purifier Fan by pressing the Purifier UP and Purifier DOWN buttons.

5. When the unit is off, all the LED lights will also be off.

The base for the Aerus Mobile can be mounted using the included suction cups, Velcro, or screws,

depending on preference. When using suction cups or Velcro, be sure the surface is smooth and clean. Dirt,

grease, protectants, and other substances will affect performance and holding ability.

OPERATION

MOUNTING THE BASE

LOW HIGH

MED

CONTROL PAD LAYOUT

1. Sitting on a at

surface with or

without the base

2. Hanging over an

edge pointing

down (laundry

hamper, garbage

can, etc.)

3. Sitting on a at surface

without the base

4. On a vertical surface with

the base (wall mount,

window, etc.)

5. Hanging over an edge

pointing up (seat pocket

in car)

The wire stand on the Aerus Mobile allows for quick release from the base, provides a stand or

hanger for the unit independent of the base, and allows the unit to either stand or hang from the

base depending on how the base is mounted.

To adjust the wire stand, loosen the two knobs on the sides of the unit approximately 1/2

turn. The unit may then be tilted up or down to adjust the angle or moved on the wire stand

to change the height. You can also remove and change the position of the wire stand to

accommodate several different mounting methods. To reinstall, simply align the two clamp

collars and insert the wire stand. Once the unit is adjusted, tighten both knobs to hold it in place.

WIRE STAND POSITIONS

ORTHEN

NOTE: Unit can be used without attaching the base or wire stand.

EFFECTS OF HIGH OR LOW VOLTAGES ON AERUS MOBILE™

WHEN USING THE 12VDC CAR ADAPTER

The Aerus Mobile™ has an operating voltage range of 11 VDC to 14.6 VDC. If the voltage coming into the unit

is too high, the unit may blow the 12VDC adapter fuse. This type of problem usually indicates something is

wrong with a vehicle’s electrical system. If the unit shuts down while using the 12VDC automotive adapter

and you are unsure of the cause, check the adapter fuse. If the fuse is not blown, test the unit using the

supplied AC adapter. Once the voltage problem (drained car battery, electrical system problem, etc.) is

corrected by a qualified service person, you will be able to resume using your Aerus Mobile™ with the

12VDC adapter.

ADJUSTING THE WIRE STAND

Insert the car adapter

into an appropriate

12 volt automotive

type power outlet.

Insert the small adapter plug into the opening located underneath at the

rear of the unit.

Select and install the proper international plug into the AC adapter. Insert correctly assembled adapter

into a standard electrical outlet.

THEN

NOTE: when installing one of the interchangeable plugs, be sure to twist and lock it into place. When

removing a plug, press the raised tab to release, then turn the plug out the top.

PUSH

PRESS HERE

2. To remove the unit from an

attached base, press down

on the front latch and slide

the unit back, then up.

NOTE

: If you prefer to remove the base and unit together, mount the base with Velcro or suction cups

to a clean, dry surface.

1. Once the unit is assembled and

the base mounted, simply snap

the wire stand into the base.

The latch at the front of the

base should snap into place,

locking in the stand and unit.

PRESSSLIDE THEN LIFT

3. For added convenience,

mount extra bases where

you use your Aerus

Mobile most. See your

Independent Distributor/

Contractor for more

information.

The Aerus Mobile comes with both a 12 volt DC car adapter and a 100 - 240 volt 50/60 Hz AC adapter

with interchangeable plugs.

PORTABILITY

Depending on how it is mounted, your Aerus Mobile can be ready to take with you in just a few seconds.

To change the car adapter fuse, unscrew and remove the

front of the adapter. Replace with the same type and rating

only: 2 amp Buss type fuse (service part #9950162).

12VDC Adapter Fuse

POWER ADAPTERS

CAUTION:

Not for use on 12 volt positive ground or 24 volt vehicles. Doing so may damage

the product.

1. Turn unit over, tilt up

slightly, and remove screws

at the front of the unit.

2. With the front remaining

tilted up, slide the lower half

of the case back and up until

it is free.

3. Lift the small circuit board

holding the target screen and

bulb (Bulb Assembly) from the

two tabs.

4. Disconnect the leads of the

Bulb Assembly from the

main circuit board.

All user maintainable parts of the Aerus Mobile are accessed by removing the lower half of the case.

DISASSEMBLY FOR MAINTENANCE AND REPLACEMENT OF SERVICE KIT 9950209

CAUTION:

The unit must be disconnected from its power source before servicing, and

should not have the power reconnected unless the case is correctly and

completely reassembled.

Reinstallation is the reverse of the above steps:

1. UV Lamp – Do not touch with bare hands. If

touched, clean the bulb with a cotton swab and a

small amount of alcohol.

2. Attach ActivePure® Target Screen (a) to the Target

Frames (b).

3. Install the legs of the Target Frames (b) into the four

holes of the Bulb Assembly PC board (c).

4. Attach the 3-pin connector (d) of the Bulb Assembly

to the main unit PC board.

5. Carefully align the two holes in the Bulb Assembly to

the two tabs on the main unit.

6. Press gently to install the Bulb Assembly.

7. Carefully replace the bottom case, being sure the

pins inside the back of the bottom case fit into the

two standoffs at back of the top case.

8. Slide the bottom case forward then down, making

sure the wires are completely inside the case.

9. Check for proper alignment before installing and

tightening the screws.

NOTE: Failure to correctly assemble may cause

damage to the case.

10. Replace cover and two screws.

5. Remove the Bulb Assembly from the unit.

YEARLY MAINTENANCE

A Service Kit is available for your Aerus Mobile. The kit contains a new ActivePure® Target and UV bulb. For

optimum performance, Aerus recommends replacing these components annually.

For more information, contact your Independent Distributor/Contractor or Aerus Customer Service at

800.243.9078 (U.S.) or 800.668.0763 (CANADA).

DISASSEMBLY CONTINUED

ASSEMBLY

Tabs

CAUTION:

The unit must be disconnected from its power source before servicing, and

should not have the power reconnected unless the case is correctly and

completely reassembled.

Depending on conditions, your Aerus Mobile will require periodic cleaning of certain

internal components every one to three months.

ActivePure® Target - Clean the target by gently removing dust with a small, soft brush.

UV Bulb - The UV bulb should be gently wiped with a soft, dry cloth. Avoid handling the UV bulb more

than necessary.

Case - Clean the exterior case of your Aerus Mobile with a soft cloth dampened (not wet)

with water. Do not use harsh chemicals or solvents.

Fan/Interior of unit - The interior and fan may be cleared of dust using canned air suitable for electronics.

TROUBLESHOOTING

If your unit fails to operate properly after performing troubleshooting, contact your

Independent Distributor/Contractor or Aerus Customer Service at 800.243.9078 (U.S.) or

800.668.0763 (CANADA) for additional support.

Unit does not operate/ all LEDs off:

• Unplug and reinsert the adapter plug and adapter to check where the power supply is plugged in to be

sure it has power.

• If using the 12VDC car adapter, remove the fuse by unscrewing the end of the adapter and check to see if it

is blown. Replace it with the same type and rating fuse only (see Specifications).

NOTE: If the fuse is not blown, check the outlet for proper voltage.

UV bulb may not be working:

• Press the PURIFIER UP or PURIFIER DOWN buttons to turn the Purifier function ON.

• If cleaning and reinstalling does not correct the problem, replace the

Bulb

Assembly (service kit #9950209).

• When looking through the rear inlet vents in low light you should see a slight bluish glow. If there is no

glow, replace the Bulb Assembly (Service Kit #9950209).

Lack of air flow:

• Make sure the intake vents are not blocked and the front of the unit is clear.

• Check to see if the fan is operating (if not, see above).

NOTE: See page 8 for detail views of components.

WARNING:

Under no circumstances should your Aerus Mobile unit be operated while any part

of the case is damaged, missing, or disassembled. If the case is damaged, return

your unit to your Independent Distributor/Contractor for repair or replacement.

Direct exposure to the internal UV light may cause eye damage.

CLEANING

CAUTION:

The unit must be disconnected from its power source before servicing, and

should not have the power reconnected unless the case is correctly and

completely reassembled.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Aerus Luftreiniger Handbücher

Aerus

Aerus Eco Sphere Bedienungsanleitung

Aerus

Aerus Beyond G4 Bedienungsanleitung

Aerus

Aerus QuietPure A1027A Bedienungsanleitung

Aerus

Aerus QuietPure Whisper Bedienungsanleitung

Aerus

Aerus LUX GUARDIAN PLATINUM Bedienungsanleitung

Aerus

Aerus Air Scrubber Bedienungsanleitung

Aerus

Aerus Pure & Clean Plus A1041A Bedienungsanleitung

Aerus

Aerus Beyond Guardian Air Home Bedienungsanleitung

Aerus

Aerus Air Scrubber Mini EM Bedienungsanleitung

Aerus

Aerus Pet ReFresh Bedienungsanleitung

Aerus

Aerus Air Scrubber Bedienungsanleitung

Aerus

Aerus F203C Bedienungsanleitung

Aerus

Aerus AQ 1000 Bedienungsanleitung

Aerus

Aerus AQ 1000 Bedienungsanleitung

Aerus

Aerus LUX GUARDIAN ANGEL Bedienungsanleitung

Aerus

Aerus Pure & Clean A1040A Bedienungsanleitung

Aerus

Aerus BEYOND GUARDIAN HEATER Bedienungsanleitung

Aerus

Aerus Lux Guardian Air Bedienungsanleitung

Aerus

Aerus Pure & Clean Bedienungsanleitung

Aerus

Aerus PowerPure AP03 Bedienungsanleitung

Aerus

Aerus Air Scrubber Bedienungsanleitung

Aerus

Aerus BEYOND SANCTUAIRY Bedienungsanleitung

Aerus

Aerus LUX GUARDIAN ANGEL Bedienungsanleitung

Aerus

Aerus Beyond PureCloud Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung