AES global PRIME6-PROX-IMPK-PE-4GA Bedienungsanleitung
1 | P a g e
Installation Instructions
For
PRIME6-PROX-IMPK-PE-4GA
PROFESSIONAL INSTALL ONLY
Do NOT give this manual to end user!
Manual Version 1
The manufacturer cannot legally offer technical support to non-qualified gate
or door installers. End users should employ the services of a professional
install company to commission or support this product!
Tip: Site Survey BEFORE you begin. See Page 3!
2 | Page
Index
Section
Pages
Site Survey
Answering on Android
Answering on Apple
LAN setup
Installation
Power
Intercom Module Wiring
Keypad Module Wiring
Output Connections Example
Adding Additional APP Users
Other Settings
Sounds, Volume & Speech
Using the APP
Keypad Programming
Using the Keypad
Troubleshooting
Revision Changes
3
4
5
6
7
8
8
9
9
10
11
12
13
14
15
15
16
3 | P a g e
Mbs
Slow Fast
Site Survey
YES!
I have 4G signal at the gate with my phone! If
not, STOP. You will need some! Try a different
network provider.
YES!
I have at least 1 Mb UPLOAD speed. If not
STOP! This system may operate intermittently
remotely or have delayed PUSH notifications.
8 | P a g e
Answering on Apple
Note: Various versions of IOS and Android OS will have different notification acceptance
techniques. Please refer to online support for your device if needed.
Swipe the
notification left
Press “VIEW”
Swipe green
icon to answer
Phone will now
launch app
TIP: Make sure ringer switch is
ON and volume is turned up.
TIP: If you don’t get
notifications then check
settings/notifications and
select the app.
TIP: If there is no voice from the
speaker at the gate, check the
iphone microphone permissions in
Settings/privacy/microphone
9 | P a g e
Installation
Power
This intercom comes with a 24v dc power supply. The intercom requires up to 2 amps peak
demand at times, therefore power cable is of extreme importance.
It is preferred the 24v dc PSU is installed within close proximity of the intercom. However, on
occasion this may be difficult to achieve. Please adhere to the cable thickness guide below or the
device may be damaged and rendered out of warranty by the manufacturer.
Up to 2 meters (6 feet) use minimum 0.5mm / 18 gauge cable.
Up to 4 meters (12 feet) use minimum 1mm / 16 gauge cable.
Up to 8 meters (25 feet) use minimum 1.5mm / 14 gauge cable.
Mount the 4G modem as
high as possible and
away from obstructions
such as vehicles, shrubs
and trees to maximise
signal strength.
Do NOT mount modem
at ground level.
Intercom wall/pillar
mounted
Pedestal mounted
version
24v dc PSU
24v dc PSU
Never use fine gauge
cable such as alarm cable
or CAT5 to power this
device. Doing so will void
the manufacturer’s
warranty!
10 | P a g e
Intercom Module Wiring
Keypad Module Wiring
24v DC PSU
110-250v
mains in
WARNING
Mains electricity to be
wired by qualified
electrician only
+24v
GND
N/O
COM
N/C
Relay1
Relay2
Exit button
24vdc
(already
pre-wired)
Relay1
Relay2
N/C
COM
N/O
Egress
Advanced
Connections
Relay3
N/C N/O
Relay2
Full/Auto
11 | P a g e
Output Connections Example
Modem Connections
The second LED will flash if you have medium 3G signal.
The second LED will stay solid if you have medium 4G signal.
RF (signal level)
COM
N/O
COM
N/C
COM
N/O
Intercom board
Keypad board
Electric Gates
Gate
Controller
Magnetic
Lock
N/C
Other control
device
12v DC
(Not supplied)
POE Power Supply
RJ45 connection
Sim Card Holder
(DATA/IOT Sim only)
LED Indicators
LAN RJ45
Connection
S
I
M
S
Y
S
SIM –The sim LED will come on if there is a sim inserted.
RF –The first LED will flash if you have low 3G signal.
The first LED will stay solid if you have low 4G signal.
N
E
T
2
The third LED will flash if you have high 3G signal.
The third LED will stay solid if you have high 4G signal.
SYS –The system LED will flash when active, solid when inactive.
NET2–This LED flashes when active.
12 | P a g e
Adding Additional APP Users
Additional users MUST be added with individual user names. Do NOT use the same username.
ADMIN Phone
ADMIN Phone
ADMIN Phone
ADMIN Phone
Enter a NEW
username &
password
Note how
existing users
can be deleted
New Phone
New Phone
New Phone
New Phone
Be sure to enter NEW
username & password as
created by the admin
phone.
13 | P a g e
Other Settings
Edit Intercom
details
Ring tones
Check APP
version
Add an intercom (can
have up to 6
doors/gates calling one
device)
Add/edit users
Turn off config
mode (extra
security)
Wifi settings &
signal
strength
Set max monitoring
time
Change relay times (1-
9 secs)
Set time zone +
(daylight saving
adjust)
Set max talking
time.
Set max ringing
time (from intercom)
Set sound option.
Duplex, simplex1,
simplex2.
Reboot
intercom
14 | P a g e
Sound, Volumes and Speech
This intercom is capable of full duplex speech, which means two people can have a conversation
and appear to speak at the same time. Since various manufacturers of android phones, iphones
and tablets all differ in acoustic performance, and different users may require varying levels of
volume on their own handset, it may be possible to setup some devices in full duplex mode but
others may need to be set in half duplex mode (phone user will press to talk). This may also be
required if a phone is in a particularly noisy environment, or the intercom is located near a busy
main road with high levels of traffic noise.
Choose the speech option which
best suits the individual and he
device being used.
+
-
SPK
Suggest 80% MAX
volume
Suggest
50% MAX
volume on
Android
“Press and Hold” option
appears when device set to
half duplex 1 or 2.
Inhaltsverzeichnis
Andere AES global Gegensprechanlage Handbücher
AES global
AES global StylusCOM Audio Bedienungsanleitung
AES global
AES global Cellcom Prime 5AB Bedienungsanleitung
AES global
AES global CellCOM Prime 7 4G Bedienungsanleitung
AES global
AES global Imperial 703 DECT Bedienungsanleitung
AES global
AES global CellCOM Prime 7 Bedienungsanleitung
AES global
AES global Styluscom Video Bedienungsanleitung
AES global
AES global 603 DECT Bedienungsanleitung
AES global
AES global 603 Bedienungsanleitung
AES global
AES global StyluscomV2 Series Bedienungsanleitung
AES global
AES global CellCOM PRIME Montageanleitung
