Afidus ATL-200S Bedienungsanleitung
ATL-200S
Quick Installation Guide
OS requirement: iOS 11.0, Android 7.0 Download APP
Download Time Lapse Video from APP to SmartPhone:
1.Tap“gallery” icon at homepage than select Time Lapse Camera or Select
smartphone icon at camera page
2.Select le document(Snapshot, Timelapse, PIR)
3.Select & play Time Lapse Video
4.Tap“share”icon and select download.
To Start/Stop recording with APP
To Start Recording:
1.Press power button on time lapse camera until you hear a beep and LED green color
2.On smart phone apps, select “camera”and “record”
3.APP shows current setting, tap“ok”
4.Enjoy it instantly
To Stop Recording:
Press power button on time lapse camera for 2 seconds, after LED indicator ashing
and you hear a beep, recording will stop automatically, Time Lapse Video will be
generated immediately
Replay & Download Time Lapse Video
from Camera to APP:
(Snap shot photo will save to smart phone photo album automacally)
1.On smart phone apps, reconnect camera Wi-Fi
2.Tap “camera” Icon
3.Tap “gallery” icon
4.Select camera icon
5.Select document
6.Tap download icon on your video
LED Indicator:
rmware upgrade: ash/1 sec.
hardware reset: ash 3 times
power on: Green on
No SD cared : Red
System breakdown : RedFlash/1 sec.
Battery Low: Red Flash/10 sec.
Recording: Green/6 sec.
Schedule, Snapshot On Demand, StepVideo:ash 0.2s x1
PIR,Hybrid:ash 0.2s x2
Share Time Lapse Video:
Tap “share” icon at the top-right corner to share videos to social media or someone through communi-
cation APP.
5
Install mSD Card,keep contact pins side up,
and insert with arrow angle
*Sandisk™ brand mSD card recommended
*Format the card before rst use
*Push the mSD cover closely or you will
lose product warranty protection.
Push the power button until you hear the beep
Shutter & Power Button
LED Indicator
PIR detector Tripod Mount
(1/4”)
Strap EyeletMicro USB Socket
*Power input
recommend: DC5V 1A
Lens
*please remove lens
*protection lm
Camera Parts
2
First Installation
Install Camera Battery(AA*4pcs)
Or rechargeable battery 1.2V
*Lithium battery or any battery
voltage higher than 1.7 volts are
not recommended
Insert desiccant sheets into the
bottom gap
Renew desiccant sheet before
recording
※ For indoor use, do not use under uorescent light
Connecting
On your phone setting
Step 1: Turn on your mobile phone WI-FI. In WI-FI SSID select the time lapse camera
ATL200S_xxxxxxxxxx. Default password is 12345678
Step 2. Open Adus Time Lapse APP. Click“Camera” icon to
connect to the ATL-200S.
Step 3: Set up new password.
Step 4: Forget camera Wi-Fi in mobile phone Wi-Fi list, and
reconnect it with new password.
Step 5: Reopen camera APP.
Step 6: Click “ Camera”again.
Step 7: Set up camera parameter and enjoy time lapse after click”Record”
Main Screen:
Connect your smartphone to
Afidus camera
Download time lapse video
in app for replay
Current Version and
update info
Album:
Snap shot photo will
be stored in this album
PIR Video will be stored
in this album
Time lapse video will be
stored inthis album
5 Video Recording Modes:
Record when
infrared detected
combine pictures into
time lapse video
Start to record
by schedule
Time lapse
video with PIR
Video lapse
Recording
3
Camera Icons:
1.Settings
2.Battery/USB
3.mSD
4.Gallery
5.Shutter Button
6.Snap Shot
7.Parameter info
8.Grid
9.AF
10.Zoom
11.FPS
12.Interval Time
13.Quality
14.Scene
15.Resolution
16.Aspect Ration
17.AE
18.AWB
19.Contrast
20.Sharpness
21.Saturation
22.HDR
1
4
11
14
5 6
2 3
9
17
10
20
7
13
12 18
15 21
16
19
22
8
4
Company Address：7F-4, No. 186, Jian 1st Rd.,Zhonghe Dist.,New Taipei City 235, Taiwan (R.O.C)
www.afidus.com [email protected] +886-2-8226-9857 +886-2-8226-9800
Andere Afidus Digitalkamera Handbücher
