Agilent Technologies 90000 X Series Bedienungsanleitung

Agilent Infiniium

90000 X-Series

Oscilloscopes

User’s Guide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

54916-97006

Edition

April 30, 2013

Available in electronic format only

Agilent Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or

subcontract, Software is delivered and

licensed as “Commercial computer

software” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S.

Government will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S.

Government users will receive no greater

than Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and met.

See also Appendix A, “Safety Notices,”

starting on page 59.

Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide 3

90000 X-Series Oscilloscopes—At a Glance

Table 1 90000 X-Series Oscilloscope Bandwidths, Sample Rates, and Memory Depths

Analog Bandwidth Sample rate Max Memory depth

2 channel 4 channel 2 channel 4 channel 4 channel

DSAX93204A 33 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSO/MSOX93204A 33 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSAX92804A 28 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSO/MSOX92804A 28 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSAX92504A 25 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSO/MSOX92504A 25 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSAX92004A 20 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSO/MSOX92004A 20 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSAX91604A 16 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSO/MSOX91604A 16 GHz 16 GHz 80 GS/s 40 GS/s 2 Gpts

DSAX91304A 13 GHz 13 GHz 80 GS/s 40 GS/s 2 Gpts

DSO/MSOX91304A 13 GHz 13 GHz 80 GS/s 40 GS/s 2 Gpts

4 Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide

Ease of use with high performance

The Agilent Technologies Infiniium oscilloscopes combine unprecedented

ease- of use with high- performance digitizing oscilloscope functionality to

simplify your design and analysis measurement tasks.

•Traditional oscilloscope front- panel interface provides direct access to

the controls needed for most troubleshooting tasks.

•Graphical user interface with menus, windows, dialog boxes, and

toolbars provides easy access to dozens of configuration and analysis

tools, ensuring you can set up and make the most complex

measurements.

•Models with bandwidths from 13 GHz to 33 GHz.

•MSO models provide 10 GS/s at 16 channels and 20 GS/s at 8 channels.

Display shows waveforms and graphical user interface

•Graphical interface allows direct interaction with waveforms, including

drag- and- drop positioning and instant waveform zoom.

•Touchscreen display allows oscilloscope operation without an external

pointing device.

•Waveforms displayed in color, making correlation easy.

•Current configuration parameters displayed near the waveform display

and are colorcoded to make identification easy.

•Graphical interface menus and toolbars simplify complex measurement

setups.

Horizontal controls set sweep speed and position

•Intensified waveforms on main sweep window make it easy to see what

will appear in the zoom window.

Acquisition and general controls start and stop the oscilloscope and do basic

setup

•Run and stop controls for continuous or single acquisitions.

•Clear display before one or more acquisitions.

•Default setup and Autoscale set initial configuration.

Hard disk drive and USB 2.0 port for saving and restoring setups and

measurement results

•Store measurement displays for inclusion in reports and test setup

guides.

•Store oscilloscope setups to repeat tests another time.

•Hard disk stores oscilloscope operating system.

Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide 5

Trigger setup controls set mode and basic parameters

•Select Edge, Glitch, or Advanced Modes.

•Choose input source and slope.

•Use graphical user interface to simplify configuration of pattern, state,

delay, and violation trigger modes.

•Use auxiliary trigger to increase triggering flexibility.

Vertical controls set attenuation and position

•Color- coded knobs make it easy to find the controls that affect each

waveform.

Marker and quick measurements help measure waveform parameters

•Waveform markers A and B to check voltage or

- time at any point on

the displayed waveform.

6 Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide

In This Book

This book gives you the information you need to begin using the Infiniium

90000 X- Series oscilloscopes. It contains three chapters, two appendixes,

and an index:

Chapter 1, “Setting Up the Oscilloscope,” starting on page 11 contains

inspection, power requirements, air flow, and setup information.

Chapter 2, “Using the Oscilloscope,” starting on page 25 gives an overview

of the front and back panel inputs and outputs, front- panel controls, and

graphical user interface, and tells you how to perform basic operations

with the oscilloscope.

Chapter 3, “Using the Online Help,” starting on page 55 describes the

Infiniium oscilloscope application’s online help contents and navigation.

The online help describes how to use the Infiniium oscilloscope application

in detail.

Appendix A provides safety notices.

Appendix B provides recommendations for working comfortably and safely

while operating the Infiniium oscilloscope.

For More Information

•For detailed information on how the oscilloscope makes measurements

and how to use the oscilloscope, see the Infiniium oscilloscope

application’s online help.

•For information on controlling the oscilloscope from a remote computer,

see the Oscilloscopes Programmer’s Reference found in the Infiniium

oscilloscope application’s online help.

•For information on testing and servicing the oscilloscope, see the

Service Guide manual found in the Infiniium oscilloscope application’s

online help.

Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide 7

Contents

90000 X-Series Oscilloscopes—At a Glance 3

In This Book 6

1 Setting Up the Oscilloscope

Inspecting package contents 12

Environmental conditions 13

Positioning for proper airflow 14

Connecting the mouse, keyboard, LAN cable, and MSO cable 15

Connecting power 16

Power Supply Protection Features 16

Connecting oscilloscope probes 17

Connecting threaded RF cables 18

Tilting the oscilloscope for easier viewing 18

Turning on the oscilloscope 19

Verifying basic oscilloscope operation 20

Installing application programs on Infiniium 21

Changing Windows Operating System Settings 22

Turning off the oscilloscope 23

Cleaning the oscilloscope 23

8 Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide

2 Using the Oscilloscope

Front Panel Inputs and Outputs 26

Channel Inputs 26

Ground 26

Aux Out 26

Cal Out 26

Probe Compensation Terminal 27

USB Host Ports 27

Back Panel Inputs and Outputs 28

Motherboard I/O 28

USB Device Port 28

10 MHz In, 10 MHz Out 29

Trig Out 29

Aux Trig 29

Digital Channels Connector 29

Front Panel Controls (Keys and Knobs) Overview 30

Graphical User Interface Overview 31

Menu Overview 34

Setting the Oscilloscope to a Known Starting Condition 36

Starting and Stopping Waveform Acquisitions 37

Adjusting the Horizontal Time Scale and Trigger Position 38

Adjusting the horizontal scale 38

Adjusting the horizontal trigger position (delay) 39

Magnifying a part of the waveform using Zoom 39

Setting the horizontal reference point 40

Using the Horizontal Setup dialog box 40

Adjusting the Vertical Settings 41

Turning an analog channel on or off 42

Adjusting the analog channel’s vertical scale and offset 42

Turning digital channels on or off 43

Controlling digital channels 43

Setting Up Triggers 44

Setting the oscilloscope to trigger on an edge 44

Using Markers and Making a Measurement 46

Making a measurement on a waveform 46

Using quick measurements 48

Using markers 49

Moving markers using the graphical interface 50

Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide 9

Controlling the Display 51

Enabling or disabling the touch screen 51

Clearing the waveform display 51

Adjusting the brightness of the displayed waveform 51

Saving and Printing Data 52

Forcing a Default Setup 53

Infiniium Hard Drive Recovery 53

3 Using the Online Help

Accessing the online help 55

Navigating through the online help 57

Accessing context-sensitive information 57

ASafetyNotices

Warnings 59

Safety Symbols 60

B Working in Comfort

About Repetitive Strain Injury 62

What is RSI? 62

What causes RSI? 62

What if I experience discomfort? 62

Mice and Other Input Devices 63

Index

10 Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide

Inhaltsverzeichnis

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies Agilent 34980A Montage- und Bedienungsanleitung

Agilent Technologies

Agilent Technologies E5091A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Medalist i3070 Series 5i Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8960 Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 8648A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U2701A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4072A Advanced Bedienungsanleitung

Agilent Technologies

Agilent Technologies N5341A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 2000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16452A Bedienungsanleitung

Agilent Technologies

Agilent Technologies ProBER 2 Montageanleitung

Agilent Technologies

Agilent Technologies 16334A Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-5400 Stücklistenhandbuch

Agilent Technologies

Agilent Technologies U1401A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 2000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies ENA Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54830 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1602B Handbuch

Agilent Technologies

Agilent Technologies E4406A VSA Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4406A VSA Series Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies N4010A Montage- und Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung

Sealey

Sealey TA130 Bedienungsanleitung