Agilent Technologies InfiniiVision 7000B Series Bedienungsanleitung



Agilent InfiniiVision

7000B Series

Oscilloscopes

User’s Guide

InfiniiVision 7000B Series Oscilloscopes User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

54695-97025

Edition

Third Edition, June 2010

Printed in Malaysia

Agilent Technologies, Inc.

1900 Garden of the Gods Rd.

Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

Software Revision

This guide was written for version 6.1 of the

Agilent InfiniiVision 7000B Series Oscillo-

scopes software.

Trademark Acknowledgments

Java is a U.S. trademark of Sun Microsys-

tems, Inc.

Sun, Sun Microsystems, and the Sun Logo

are trademarks or registered trademarks of

Sun Microsystems, Inc. in the U.S. and other

countries.

InfiniiVision 7000B Series Oscilloscopes User’s Guide 3

InfiniiVision 7000B Series Oscilloscopes—At a Glance

The Agilent InfiniiVision 7000B Series oscilloscopes deliver

powerful features and high performance:

• 100 MHz, 350 MHz, 500 MHz, and 1 GHz bandwidth

models.

•Upto4GSa/ssamplerate.

• 12.1 inch XGA display.

• Powerful triggering including analog HDTV and USB.

Options for CAN, FlexRay, I2C, I2S, LIN, MIL- STD 1553,

SPI, and UART/RS232.

• USB and LAN ports make printing, saving and sharing

data easy.

• 2- channel and 4-channel Digital Storage Oscilloscope

(DSO) models.

• 2+16- channel and 4+16- channel Mixed Signal Oscilloscope

(MSO) models.

• An MSO lets you debug your mixed- signal designs using

up to four analog signals and 16 tightly correlated digital

signals simultaneously.

4 InfiniiVision 7000B Series Oscilloscopes User’s Guide

• You can easily upgrade an InfiniiVision 7000B Series

oscilloscope from a DSO to an MSO and/or add features

such as Segmented Memory and Mask Test.

• A Quick Help system is built into the oscilloscope. Press

and hold any key to display Quick Help. Complete

instructions for using the quick help system are given on

page 49.

Agilent InfiniiVision oscilloscopes feature MegaZoom III

technology:

•Most responsive deep memory.

•High definition color display.

•Largest display in its class (12.1 inches).

•Fastest waveform update rates, uncompromised.

For more information about InfiniiVision oscilloscopes, see:

www.agilent.com/find/scope

Table 17000B Series Model Numbers, Bandwidths, and Sampling Rates

Bandwidth 100 MHz 350 MHz 500 MHz 1 GHz

Maximum Sample Rate 2 GSa/s 2 GSa/s 4 GSa/s 4 GSa/s

2-Channel + 16 Logic Channels MSO MSO7012B MSO7032B MSO7052B

4-Channel + 16 Logic Channels MSO MSO7014B MSO7034B MSO7054B MSO7104B

2-Channel DSO DSO7012B DSO7032B DSO7052B

4-Channel DSO DSO7014B DSO7034B DSO7054B DSO7104B

InfiniiVision 7000B Series Oscilloscopes User’s Guide 5

In This Guide

This guide shows you how to use the InfiniiVision

7000B Series oscilloscopes. It contains these chapters:

1GettingStarted

2 Probing the Device Under Test

3 Displaying Waveforms

4Triggering

5 Measurements and Math Functions

6 Saving, Recalling, and Printing

7 Acquisition Modes

8WebInterface

9 Serial Decode/Lister

10 CAN/LIN Triggering and Serial Decode

11 I2C/SPI Triggering and Serial Decode

12 I2S Triggering and Serial Decode

13 FlexRay Triggering and Serial Decode

14 MIL-STD 1553 Triggering and Serial Decode

15 UART/RS232 Triggering and Serial Decode

16 Analyzing Data

17 Digital Channels

6 InfiniiVision 7000B Series Oscilloscopes User’s Guide

18 Oscilloscope Utility Settings

19 Reference

Index

NOTE

Digital Channels

Because all of the oscilloscopes in the Agilent InfiniiVision Series have analog channels,

the analog channel topics in this book apply to all instruments. Whenever a topic discusses

the digital channels, that information applies only to Mixed-Signal Oscilloscope (MSO)

models or DSO models that have been upgraded to an MSO.

NOTE

Abbreviated instructions for pressing a series of keys and softkeys

Instructions for pressing a series of keys are written in an abbreviated manner. Instructions

for pressing Key1, then pressing Softkey2, then pressing Softkey3 are abbreviated as

follows:

Press [Key1] > Softkey2 > Softkey3.

The keys may be a front panel [Key] or a Softkey. Softkeys are the six keys located directly

below the oscilloscope display.

InfiniiVision 7000B Series Oscilloscopes User’s Guide 7

Contents

Figures 21

Tables 23

1 Getting Started 25

Inspect the Package Contents 26

Tilt the Oscilloscope for Easy Viewing 28

Power-On the Oscilloscope 29

Power Requirements 29

Ventilation Requirements 29

To mount the oscilloscope in a rack 29

To power-on the oscilloscope 30

Recall the Default Oscilloscope Setup 31

Input a Waveform and AutoScale 32

How AutoScale works 33

Become Familiar with Oscilloscope Controls and Connectors 34

Front Panel Controls and Connectors (4-Channel) 35

Front Panel Controls and Connectors (2-Channel, differences only) 36

Front Panel Control and Connector Descriptions 37

Do not connect a host computer to the oscilloscope’s USB host port 37

Rear Panel (4-Channel) 42

Rear Panel (2-Channel) 43

Rear Panel Connector Descriptions 44

Front Panel Overlays for Different Languages 45

Using the Oscilloscope Softkey Menus 46

8 InfiniiVision 7000B Series Oscilloscopes User’s Guide

Contents

Become Familiar with the Osciilloscope Display 48

Access the Built-In Quick Help 49

To view Quick Help 49

To select the Quick Help language 50

To get the latest Quick Help 50

2 Probing the Device Under Test 51

Analog Input Impedance (50 Ohm or 1 MOhm) 52

AutoProbe Interface 52

Passive Probes 53

Active Probes 53

Connect the Probes to the Oscilloscope 55

Maximum input voltage at analog inputs 55

Do not float the oscilloscope chassis 55

Compensating Passive Probes 56

Calibrating Probes 57

Manually Setting the Probe Attenuation Factor 59

Digital Probes 60

Contents

InfiniiVision 7000B Series Oscilloscopes User’s Guide 9

3 Displaying Waveforms 61

Using the Horizontal Controls 62

To adjust the horizontal (time/div) scale 63

To adjust the horizontal delay (position) 63

Panning and Zooming Single or Stopped Acquisitions 64

To change the horizontal time mode (Normal, XY, or Roll) 65

To display the zoomed time base 71

To change the horizontal scale knob’s coarse/fine adjustment setting 73

To position the time reference (left, center, right) 74

To navigate the time base 74

Using the Vertical Controls 77

To turn waveforms on or off (channel or math) 78

To adjust the vertical scale 78

To adjust the vertical position 78

To specify channel coupling 79

To specify channel input impedance 79

To specify bandwidth limiting 80

To change the vertical scale knob’s coarse/fine adjustment setting 81

To invert a waveform 81

Setting Analog Channel Probe Options 82

To specify the channel units 82

To specify the probe attenuation 82

To specify the probe skew 83

To calibrate a probe 83

Changing the Display Settings 84

To adjust waveform intensity 84

To set or clear infinite persistence 85

To clear the display 86

To adjust the grid brightness 86

To display waveforms as vectors or dots 87

To freeze the display 87

10 InfiniiVision 7000B Series Oscilloscopes User’s Guide

Contents

Using Labels 89

To turn the label display on or off 89

To assign a predefined label to a channel 90

To define a new label 91

To load a list of labels from a text file you create 92

To reset the label library to the factory default 93

4Triggering95

Triggering - General Information 97

Trigger Mode and Coupling Menu 98

Auto and Normal Trigger modes 99

Choosing Auto Trigger Mode or Normal Trigger Mode 99

Auto Mode 100

Normal Mode 100

Trigger Level Adjustment 102

Trigger Coupling 103

Trigger Noise Rejection 104

HF Reject 105

LF Reject 105

Noise Rejection 106

Trigger Holdoff 107

Trigger Holdoff Operating Hints 107

To set holdoff 107

External Trigger Input 109

2-Channel Oscilloscope External Trigger Input 109

Maximum voltage at 2-channel oscilloscope external trigger input 110

4-Channel Oscilloscope External Trigger Input 111

Maximum voltage at 4-channel oscilloscope external trigger input 111

Andere Handbücher für InfiniiVision 7000B Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies E4406A VSA Series Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 3070 Series Betriebsanleitung

Agilent Technologies

Agilent Technologies 54620 Series Bedienungs- und Sicherheitshinweise

Agilent Technologies

Agilent Technologies ACQIRIS CC103 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Infiniium 90000 X Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-5400 Stücklistenhandbuch

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E5091A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16334A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 81250 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 2000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1610/20A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E6651A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 85056A Handbuch

Agilent Technologies

Agilent Technologies BERT N4901A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Montage- und Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8960 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Handbuch

Agilent Technologies

Agilent Technologies 11974 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E8285A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8960 Installations- und Betriebshandbuch

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung

Sealey

Sealey TA130 Bedienungsanleitung