4
2) Turning on the Speakerphone, the Speakerphone
will go into pairing mode. When it's ready for the
connection, the LED indicator will flash blue.
3) Turn on your mobile phone's Bluetooth and
search for Bluetooth devices (refer to User
Manual of your phone)
4) Select "T821" from the list of devices, choose to
connect to the speakerphone. Some mobile
phones will need you to enter the code " 0000 "
to complete pairing. The LED indicator will flash
every 3 seconds after paired successfully, and
the voice prompt "connected".
5) Hands-free is now activated.
Note: If the Speakerphone fails to pair with your
mobile phone after 2 minutes, please turn it off,
then repeat the above steps.
Connecting of Phone 2
If you need to connect another Bluetooth-enabled
mobile phone, please follow below steps:
1) Turn off Bluetooth of your mobile phone to
disconnect.
2) Turn off the speakerphone and then restart it.
3) Follow the connection instructions above.
Vibration Switch Sensor
The vibration switch sensor will detect the
vibration of your car's door as you enter. It will
power on the Bluetooth speakerphone and re-
