Agrisan MT 12 Leitfaden
1
SALZBURGER GRAIN MILL
MT 12
Owner’s Manual and
User’s Guide
Before operating the appliance for the first time, please study these instructions
and important safe-guards carefully.
2
Inhalt
DEAR CUSTOMER, ...................................................................................... 4
CONTROL ELEMENTS OF THE ELECTRIC GRAIN MILL MT12 .................... 5
SHORT GUIDE:............................................................................................ 8
SUITABLE SITE ............................................................................................ 9
GRAIN TYPE/CORN TYPE ....................................................................... 10
SUITABLE GRAIN TYPES ............................................................................ 11
CORRECT STORAGE OF GRAIN.................................................................. 12
DRYING GRAIN: ........................................................................................ 12
MILLING ................................................................................................... 13
CORRECT MILLING:................................................................................... 14
Adjusting the degree of fineness............................................................................... 15
Operation of the locking screw: ................................................................................ 15
ADJUSTMENT OF THE DEGREE OF FINENESS:........................................... 16
Interrupting the milling process:............................................................................... 17
Opening the milling chamber:.................................................................................. 17
3
Closing the milling chamber:..................................................................................... 18
CARE AND CLEANING ............................................................................... 18
Cleaning of the millstones: ....................................................................................... 18
Smeared mill stones ................................................................................................. 19
Cleaning the milling Chamber: .................................................................................. 19
Against moths and insects: ....................................................................................... 20
Cleaning the thread: ................................................................................................. 20
Care and cleaning of the housing: ............................................................................. 20
PROBLEM SOLUTIONS .............................................................................. 21
IF NOTHING HELPS ................................................................................... 22
WARRANTY............................................................................................... 22
Terms of Warranty:
................................................................................................... 23
Warranty claims:..................................................................................................... 23
BEFORE YOU RETURN THE APPLIANCE: ............................................. 23
SHIPPING -PACKING:............................................................................ 24
TECHNICAL DATA: MT 12 ......................................................................... 25
RECEIPE.................................................................................................... 26
4
Treat natural things naturally......
Dear customer,
We are very pleased that you have bought our grain mill MT12 and trust that
you will thoroughly enjoy making a wide variety of healthy wholemeal foods.
Your grain mill is a top-quality household appliance that has been
manufactured according to our year long experience.
Please read these operating instructions carefully before operating your mill
for the first time. Give particular consideration to our recommendations on
safety, quality of grains and the care of your mill and you will enjoy many years
of milling without the slightest problem.
Agrisan Naturprodukte GmbH
Christine Thurner
This mill is designed for the exclusive production of flour and
bran in the household.
5
Control elements of the electric grain mill MT12
Please read the operating and safety instruction carefully before using the
appliance for the first time
Lid
Hopper
Locking screw
Marking for fine
adjustment
Mains connection
cable
Flour spout
On/off switch
6
Before using your mill for the first time…
There has never been a „naturally-talented “milling expert and so before you
begin the milling process, we wish to give you some information on the
natural stone –granite –which has been used in your mill.
Compared with mill stones manufactured from artificial corundum
ceramic material, our natural stone is relatively smooth and reacts
sensitively to damp grain.
Damp grain could be become or already contain mildew. Therefore, it is
essential to pay special attention to good and healthy storage of your grain.
Even long-time users of grain mills can sometimes find it difficult to decide
whether the grain is dry or damp!
Grain containing a high percentage of moisture has the tendency to smear
the mill stones, which will cause the mill to stop. Please see the chapter on
operating instructions for further information.
In order to really get used to using your mill properly, we recommend you to
heat your grain in the oven at 50 degrees for about 30 minutes. Afterwards
allow to cool before use!
Following this advice before using your mill for the first time will show you
just how fine your mill can work under the best conditions.
It is, however, not necessary to heat your grain in the oven prior to each
milling process!!!
It is only an initial aid, at the same time giving an indication of the
best possible degree of flour fineness achievable.
You will get to know your mill best by adjusting the different fineness settings.
Start by using a coarse setting and then try out finer adjustment settings.
7
Basic rules for more safety –
important safety instructions
Please read these operating and safety instructions carefully before
using your grain mill.
This will avoid errors and accidents and can secure the functional and
safe use of the appliance.
Please keep this user manual and should you hand the mill to any third party
ensure the next user has the manual.
When operating this grain mill the following precautionary and
safety measures must be applied:
1. Read all Instruktion carefully.
2. The appliance must only be used for its intended purpose
(household production of flour and bran)
3. The mill must only be operated indoors and never outside.
4. Before operating the appliance, it is essential to check its flawless condition.
Special attention must be paid to damaged cables, brittle or cracked
insulations or damaged housings. Should the mains cable or other parts of the
mill be damaged, repair work must be carried out by the manufacturer,
respectively authorized, qualified persons. Reparaturen dürfen nur durch von
Agrisan GmbH autorisierte Personen durchgeführt werden.
5. Repairs may only be carried out by persons authorized by Agrisan GmbH.
6. Defective or deficient electrical appliances must not be operated.
7. The seller must immediately be informed of any defects.
8. Only connect the mill to a correctly installed protective mains socket. Before
doing so, please check that the voltage specified on the nameplate on the
grain mill matches the voltage of the energy supply.
9. Multiple plugs and extension cables must not be overloaded.
10. The cable of the mill must not be allowed to hang over the edge of the table
or work surface. Any contact with hot plates or any other sources of heat
must be strictly avoided at all times.
11. Leads to electrical appliances must not be laid or squashed over sharp edges
or moveable parts.
12. Appliances must only be operated with the intended switches.
13. Safety devices must not be modified or turned off.
14. Should any disturbances occur immediately turn the appliance and disconnect
8
the plug.
15. Do not disconnect the plug from the mains socket by pulling on the cable.
16. Only ever operate the mill on a flat, stable surface. The mill must be
positioned so that slipping of the mill itself or the flour container during the
milling process cannot occur. It is best to place the mill on a firm surface,
(such as a kitchen worktop). This will ensure that the ventilation slots on the
underside of the mill, which serve to ventilate the motor, remain free.
17. Strict monitoring of the appliance is essential when being used by children.
18. Strict monitoring of the appliance is essential when being used in the vicinity
of children.
19. Never operate the mill unless under supervision.
20. Always keep the mill out of the reach of children.
21. The appliance must not be operated by persons with either physical or mental
handicaps or those who do not have sufficient knowledge of the safe
operation of the appliance. The exception to such operation of the appliance
is when used under supervision of persons responsible for the safety of any
handicapped persons
22. Never immerse the mill or parts of the same into water or other liquids.
Never connect a wet plug to the mains socket or touch it if your hands are
wet.
23. Any screw fittings which require a screw driver to open must not be opened.
24. Industrial motors can be damaged by longer periods of idle running. After
Use, please always turn the motor off immediately.
Intended use:
Our mill MT 12 is designed and constructed for domestic use. The appliance is
intended for the milling of such grain types as listed in the owner's manual.
Short Guide:
1. Connect the plug to the mains socket
2. Place a suitable container under the flour spout
3. Switch the motor on
4. Roughly adjust the degree of fineness setting
5. Add the grain
6. Re-adjust the desired degree of fineness setting.
7. At the end of the flour production turn the motor off
9
Suitable Site
The Salzburger grain mill is made of high quality solid beech wood.
Wood is a natural product, which during its whole lifetime, is continually
subjected to influences of the environment. Change of climate and
temperature can cause small cracks in the housing of the mill. However, such
cracks will have no effect whatsoever on the mill’s
functioning. Place your mill in a dry place and protect it from any direct
source of heat. Avoid the vicinity of radiators and direct sunlight. At the same
time steam and dampness should be avoided (too high humidity) should be
avoided.
10
GRAIN TYPE/CORN TYPE
Please make sure to use only dry and cleaned grain!
Moist grain will smear
the millstones! (Please see the chapter on smeared millstones).
Poorly cleaned grain can include dirt or foreign particles (e.g. small
stones etc.), which can damage the millstones.
Mill to the desired degree of fineness in one process (except when
processing large, hard kernels such as corn).
A second re-milling can result in the grain input funnel becoming
blocked and will not give satisfactory milling results. The Salzburger Grain Mill
will give you powder fine and flaky flour in one milling process
Storage of the grain indoors with up to 60% humidity, allows a
problem-free processing. Storage at humidity levels over 60 % can
result in smearing of the millstones during fine processing.
The following test will show you yourself just how dry your
grain is:
Dry grain "cracks", if you crush it on a hard surface with a spoon.
Damp grain can be flattened like an oatmeal flake. If you cut dry
grain kernels with a sharp knife the pieces will “fly”
apart. Cutting damp grain kernels is like cutting bread. Rye should be stored
for at least 6 months after the harvest.
Andere Handbücher für MT 12
1
Inhaltsverzeichnis
Andere Agrisan Küchengerät Handbücher
