Installation-, Operating-, Maintenance-Manual, Spare Part List BCR03
AGT-PSG GmbH & Co.KG
Errors and printing mistakes excepted
Page 3
Translation - Manual BCR03 Rev. 7/2017
Introduction
Dear Customer,
Thanks that you have decided to buy our BCR03 sample gas cooler. You have chosen one of the most
progressive appliances, which will facilitate a durable and trouble-free operation, if installation and
operating is correct.
Before installation and initial operation, please read the following instructions very carefully
and follow our indications! Only if you observe our regulations and instructions for the
sample gas cooler, a perfect functioning and so, a reliable compressed air conditioning will
be guaranteed. Installation and initial start of operation has to be done through qualified and
skilled staff only, and under usual proceedings within the gas analysis technology. Here from
resulting general rules for the proper installation and operation could possibly not be taken
completely into this instruction. We are not liable for non appliancespecific regulations and
instructions. If statements in this instruction are contrary to legal or other valid regulations,
so they have to be replaced accordingly. Other statements remain untouched. Due to the
continuous technical evolution, we reserve the right to introduce any necessary change
without giving previous notice.
This manual must be maintained available in any moment for future references and
it has to be intended as inherent part of the sample gas cooler.
These operating instructions must be continuously available at the site where the sample gas
cooler is used. We recommend to prepare a copy and keep the same in a safe and freely
available place next to the sample gas cooler. Keep the original document in a safe place.
Notes on supplementary documents: Supplementary documents such as operation manuals
for options or pertaining components must always be heeded. They contain additional
information, e.g. regarding maintenance, and are therefore necessary for safe operation of
the plant.
Target Groups of these Operating Instructions
These operating instructions are intended for all persons working on and using the sample gas
cooler. We assume that all such persons are specialist personnel, e.g. electricians, analysis or
cooling technicians, respectively instructed personnel.
We assume the following points:
There are appropriate operating instructions for the application intended by the
operator.
The staff has been instructed how to handle the sample gas and is aware of the
involved risks and the general danger prevention measures.
The staff has experience in handling sample gas as well as in handling electrical and
refrigerated devices.
