AIC SB102-VG Bedienungsanleitung

UM_SB102-VG_v 1_012218

SB102-VG

Storage Server Barebone

User's Manual

Contents

CONTENTS

PREFACE�� i

SAFETY INSTRUCTIONS�� ii

CHAPTER OVERVIEW �� iv

Chapter 1� Product Features�� 1

1�1 Box Contents��1

1.2 Specications ��2

1�3 Features��3

Chapter 2� Hardware Setup�� 5

2�1 Central Processing Unit (CPU) ��5

2�2 System Memory & SFF-8643��10

2�3 Removing and Installing the Top Cover ��13

2�4 Removing and Installing the Hard Disk Drive ��14

2�5 Removing and Installing the Fan Module ��16

2�6 Removing and Installing the Power Supply Unit Module��17

2�7 Removing and Installing the Riser Card��18

This document contains proprietary information about AIC products

and is not to be disclosed or used except in accordance with

applicable agreements.

PREFACE

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photo-static,

recording or otherwise, without the prior written consent of the manufacturer.

Trademarks

All products and trade names used in this document are trademarks or registered

trademarks of their respective holders.

Changes

The material in this document is for information purposes only and is subject to

change without notice.

Warning

A shielded-type power cord is required in order to meet FCC emission limits and also

to prevent interference to the nearby radio and television reception. It is essential

that only the supplied power cord be used. Use only shielded cables to connect I/

O devices to this equipment. You are cautioned that changes or modifications not

expressly approved by the party responsible for compliance could void your authority

to operate the equipment.

Disclaimer

AIC shall not be liable for technical or editorial errors or omissions contained herein.

The information provided is provided "as is" without warranty of any kind. To the

extent permitted by law, neither AIC or its affiliates, subcontractors or suppliers

will be liable for incidental, special or consequential damages including downtime

cost; lost profits; damages relating to the procurement of substitute products or

services; or damages for loss of data, or software restoration. The information in this

document is subject to change without notice.

SAFETY INSTRUCTIONS

Before getting started, please read the following important cautions:

• All cautions and warnings on the equipment or in the manuals should be noted.

• Most electronic components are sensitive to electrical static discharge. Therefore, be

sure to ground yourself at all times when installing the internal components.

• Use a grounding wrist strap and place all electronic components in static-shielded

devices. Grounding wrist straps can be purchased in any electronic supply store.

• Be sure to turn off the power and then disconnect the power cords from your system

before performing any installation or servicing. A sudden surge of power could damage

sensitive electronic components.

• Do not open the system’s top cover. If opening the cover for maintenance is a must,

only a trained technician should do so. Integrated circuits on computer boards are

sensitive to static electricity. Before handling a board or integrated circuit, touch

an unpainted portion of the system unit chassis for a few seconds. This will help to

discharge any static electricity on your body.

• Place this equipment on a stable surface when install. A drop or fall could cause injury.

• Please keep this equipment away from humidity.

• Carefully mount the equipment into the rack, in such manner, that it won’t be

hazardous due to uneven mechanical loading.

• This equipment is to be installed for operation in an environment with maximum

ambient temperature below 35°C.

• The openings on the enclosure are for air convection to protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

• Never pour any liquid into ventilation openings. This could cause fire or electrical

shock.

• Make sure the voltage of the power source is within the specification on the label

when connecting the equipment to the power outlet. The current load and output

power of loads shall be within the specification.

• This equipment must be connected to reliable grounding before using. Pay special

attention to power supplied other than direct connections, e.g. using of power strips.

iii

• Place the power cord out of the way of foot traffic. Do not place anything over the power

cord. The power cord must be rated for the product, voltage and current marked on the

product’s electrical ratings label. The voltage and current rating of the cord should be

greater than the voltage and current rating marked on the product.

• If the equipment is not used for a long time, disconnect the equipment from mains to avoid

being damaged by transient over-voltage.

• Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

• If one of the following situations arise, the equipment should be checked by service

personnel:

1. The power cord or plug is damaged.

2. Liquid has penetrated the equipment.

3. The equipment has been exposed to moisture.

4. The equipment does not work well or will not work according to its user manual.

5. The equipment has been dropped and/or damaged.

6. The equipment has obvious signs of breakage.

7. Please disconnect this equipment from the AC outlet before cleaning. Do not use liquid

or detergent for cleaning. The use of a moisture sheet or cloth is recommended for

cleaning.

• Module and drive bays must not be empty. They must have a dummy cover.

1. Equipment intended for installation in Restricted Access Location.

2. The product installation position less than 1 m in height from the supporting surface.

3. The product don’t support redundant function under 180 voltage AC inlet.

Product features and specifications are subject to change without notice.

CAUTION :

risk of explosion if battery is replaced by an incorrect type.

dispose of used batteries according to the instructions.

After performing any installation or servicing, make sure the

enclosure are lock and screw in position, turn on the power.

CHAPTER OVERVIEW

Chapter 1 Product Features

SB102-VG is a flexible storage server barebone that is specifically designed to

accommodate diverse corporations and enterprises for managing heavy workloads

and multiple applications.

Chapter 2 Hardware Setup

This chapter displays an easy installation guide for assembling the hardware in this

product. Utmost caution for proceeding to set up the hardware is highly advised.

Most of the components are highly fragile and vulnerable to exterior inuence. Do

not endanger the device by placing the device in an unstable environment.

Chapter 3 Motherboard Settings

This chapter elaborates the overall layout of the motherboard that had been

designed for the the server, which include multifarious connectors, jumpers, and

LED descriptions. These descriptions assist in configuring various settings in the

motherboard.

Chapter 4 BIOS Configuration Settings

This chapter introduces the key features of BIOS, including the descriptions and

option keys for diverse functions. These details provide users to maintain and

congure input/output devices.

Chapter 5 BMC Configuration Settings

This chapter illustrates the diverse functions of IPMI BMC, including the details on

logging into the web page and assorted denitions. These descriptions are helpful

in conguring various functions through Web GUI without entering the BIOS setup.

For more information about BMC configurations, please refer to IPMI BMC

(Aspeed2500) User's Manual for a more detailed description.

Chapter 6 Hardware Specification

This chapter elaborates the overall layout of the hardware for this product,

including information for various connectors and LEDs. These elaborations are

useful in conguring your hardware.

Chapter 7 Technical Support

For more information or suggestion, please verify and contact the nearest AIC

corporation representative in your district or visit the AIC website. It is our pleasure

to provide the best service for our customers.

Chapter 1 Product Features

SB102-VG User's Manual

♦PACKAGE CONTENT MAY VARY PER REGION.

Chapter 1� Product Features

SB102-VG is a high density storage storage server that includes a mother board,

a chassis, power supply, fan, and HDD backplane. For more information about

our product, please visit our website at http://www.aicipc.com/en/index.

Before removing the subsystem from the shipping carton, visually inspect the

physical condition of the shipping carton. Exterior damage to the shipping carton

may indicate that the contents of the carton are damaged. If any damage is

found, do not remove the components; contact the dealer where the subsystem

was purchased for further instructions. Before continuing, first unpack the

subsystem and verify that the number of components in the shipping carton is

accurate and in good condition.

This product contains the components listed below.

Please confirm the number and the condition of the components before

installation.

• Enclosure

(includes power supply, fan & HDD tray)

• Power cord (vary per region)

• 28" Slide rail x 1 set (optional)

• Screw kit x 1

1�1 Box Contents

1.2 Specications

Dimensions

(W x D x H)

(with chassis ears)

mm : 482.6 x 660x 44

inches : 19 x 26 x 1.7

Motherboard AICServer Board Virgo

Processor

Support Intel® Xeon® Scalable Processors

UPI Speeds 9.6 GT/s, 10.4 GT/s

Socket Type Socket P0 (LGA-3647 Socket)

Chipset Support Intel® Lewisburg C620 series Chipset

System Memory • DDR4 2666 ECC RDIMM

• Total 12 memory slots; 6 channel per CPU (1DPC)

Expansion Slots PCIe 3.0 1 x16 slot via riser card

System BIOS

BIOS Type Insyde BIOS

BIOS Features

• ACP

• PXE

• WOL

• AC loss recovery

• SMBIOS

• Serial console redirection

• BIOS Recovery Mode

• SRIOV

On-board

Devices

SATA/SAS

• Lewisburg PCH on-chip solution

• 8 x SATA 6.0 Gb/s (by 2 x mini-SAS) +

2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin)

• Broadcom SAS IOC SAS3008 supports up

to 8 ports 12S SAS via 2 x SFF-8643 mini-

SAS HD (optional)

IPMI

Aspeed AST2500 Advanced PCIe Graphics &

Remote Management Processor

• Baseboard Management Controller

• Intelligent Platform Interface 2.0 (IPMI 2.0)

• iKVM, Media Redirection, IPMI over LAN,

Serial over LAN

• SMASH Support

Network

Controllers

• Intel® PCH (Lewisburg) Integrated 10GbE

LAN Controller with dual 10GbE SFP+

(KR/SFI/XFI) or 1GbE (KX) (option)

• Realtek RTL8201EL for BMC dedicate

management port

Graphics

Aspeed AST2500 Advanced PCIe Graphics &

Remote Management Processor

• PCIe VGA/2D Controller

• 1920x1200@60Hz 32bpp

Rear I/O

LAN

• 2 x 10G SFP+

• 1 x GbE RJ45 dedicated to BMC

management

USB 2 x USB 3.0 double-stack Type A

VGA 1 x external VGA port

Serial Port 1 x external DB-9 COM port

Power Supply 650W 1+1 redundant power supply

(Optional 750W/850W 1+1 redundant power supply)

System Cooling 5 x 40x56mm dual rotor fans

System

Management

• Baseboard Management Controller

• Intelligent Platform Interface 2.0 (IPMI 2.0)

• iKVM, Media Redirection, IPMI over LAN, Serial over LAN

• SMASH Support

• HTML5

Environmental • Operating temperature : 0° - 35°C

• System relative humidity : 5% - 95% non-condensing

Gross Weight (w/ PSU & Rail)

kgs : 24

lbs : 53

Packaging

Dimensions(W x D x H)

mm : 590 x 1050 x 330

inches : 23.2 x 41.3 x 13

Mounting Standard28" tool-less slide rail

Rear Panel

3 LAN ports (GbE RJ45 x 1, 10G SFP+ x 2), 2 USB 3.0 double stack Type A, 1 VGA port

and 1 DB-9 COM-port

Front Panel

2 system buttons (Power & Reset) and 3 LED indicators (System power, System hard

drive disk activity, Service ID)

10 x 2.5" hot swap drive bays

Power On/Off

System Power LED

System HDD Activity LED

Service ID LED On/Off

System Reset

LAN 1 LED

LAN 2 LED

1 x 16 slot via riser card

1�3 Features

SB102-VG is a reliable 1U storage server barebone with 10 hard drive disk bays that

supports two Intel® Xeon® Scalable processors. This barebone consists of a Intel®

Lewisburg C620 series Chipset, onboard baseboard management controller for

system management and IPMI control and hot swap redundant fans.

Inhaltsverzeichnis

Andere AIC Server Handbücher

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung