AIC SB122A-PH Bedienungsanleitung

SB122A-PH

Storage Server Barebone

User's Manual

UM_SB122A-PH_v.3_052918

Contents

CONTENTS

PREFACE�� i

SAFETY INSTRUCTIONS�� ii

CHAPTER OVERVIEW �� iv

Chapter 1� Product Features�� 1

1�1 Box Content ��1

1.2 Specications ��2

1�3 Features��3

Chapter 2� Hardware Setup�� 7

2�1 Central Processing Unit (CPU) ��7

2�2 System Memory��14

2�3 Removing and Installing the Chassis Top Cover ��18

2�4 Removing and Installing the Hard Disk Drive ��19

2�5 Removing and Installing the Fan Module ��20

2�6 Removing and Installing the Power Supply Unit Module��22

2�7 Replacing the PCIe Card and Riser Assembly ��23

2�8 Tool-less Blade Slide��25

Chapter 3� Motherboard Settings�� 29

3�1 Motherboard Block Diagram ��29

3�2 Motherboard Layout ��30

3�3 Motherboard Content List��31

3�4 Internal Connectors/Jumpers ��32

3�5 LEDs��38

Chapter 4. BIOS Conguration Settings�� 41

4�1 BIOS Setup��41

4�2 Updating BIOS��43

Contents

Chapter 5. BMC Conguration Settings�� 45

5�1 Method 1 (Use the BIOS Setup) ��45

5�2 Method 2 (Use a Dos Tool - Syscheck) ��48

5�3 Connect to BMC ��50

5�4 Updating BMC Firmware��55

Chapter 6. Hardware Specication �� 56

6�1 Backplane��56

6�2 Riser Card��59

Chapter 7� Technical Support�� 63

This document contains proprietary information about AIC products

and is not to be disclosed or used except in accordance with

applicable agreements.

PREFACE

• Copyright

No part of this publication may be reproduced, stored in a retrieval system, or transmitted

in any form or by any means, electronic, mechanical, photo-static, recording or otherwise,

without the prior written consent of the manufacturer.

• Trademarks

All products and trade names used in this document are trademarks or

registered trademarks of their respective holders.

• Changes

The material in this document is for information purposes only and is subject to change

without notice.

• Warning

1. A shielded-type power cord is required in order to meet FCC emission limits and also

to prevent interference to the nearby radio and television reception. It is essential that

only the supplied power cord be used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. You are cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

• Disclaimer

AIC shall not be liable for technical or editorial errors or omissions contained herein.

The information provided is provided "as is" without warranty of any kind. To the extent

permitted by law, neither AIC or its affiliates, subcontractors or suppliers will be liable for

incidental, special or consequential damages including downtime cost; lost profits; damages

relating to the procurement of substitute products or services; or damages for loss of data,

or software restoration. The information in this document is subject to change without

notice.

SAFETY INSTRUCTIONS

• Before getting started, please read the following important cautions:

• All cautions and warnings on the equipment or in the manuals should be noted.

• Most electronic components are sensitive to electrical static discharge. Therefore, be

sure to ground yourself at all times when installing the internal components.

• Use a grounding wrist strap and place all electronic components in static-shielded

devices. Grounding wrist straps can be purchased in any electronic supply store.

• Be sure to turn off the power and then disconnect the power cords from your system

before performing any installation or servicing. A sudden surge of power could damage

sensitive electronic components.

• Do not open the system’s top cover. If opening the cover for maintenance is a must,

only a trained technician should do so. Integrated circuits on computer boards are

sensitive to static electricity. Before handling a board or integrated circuit, touch

an unpainted portion of the system unit chassis for a few seconds. This will help to

discharge any static electricity on your body.

• Place this equipment on a stable surface when install. A drop or fall could cause injury.

• Please keep this equipment away from humidity.

• Carefully mount the equipment into the rack, in such manner, that it won’t be

hazardous due to uneven mechanical loading.

• This equipment is to be installed for operation in an environment with maximum

ambient temperature below 35°C.

• The openings on the enclosure are for air convection to protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

• Never pour any liquid into ventilation openings. This could cause fire or electrical

shock.

• Make sure the voltage of the power source is within the specification on the label

when connecting the equipment to the power outlet. The current load and output

power of loads shall be within the specification.

• This equipment must be connected to reliable grounding before using. Pay special

attention to power supplied other than direct connections, e.g. using of power strips.

• Place the power cord out of the way of foot traffic. Do not place anything over the

power cord. The power cord must be rated for the

iii

• product, voltage and current marked on the product’s electrical ratings label. The voltage

and current rating of the cord should be greater than the voltage and current rating marked

on the product.

• If the equipment is not used for a long time, disconnect the equipment from mains to avoid

being damaged by transient over-voltage.

• Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

• If one of the following situations arise, the equipment should be checked by service

personnel:

1. The power cord or plug is damaged.

2. Liquid has penetrated the equipment.

3. The equipment has been exposed to moisture.

4. The equipment does not work well or will not work according to its user manual.

5. The equipment has been dropped and/or damaged.

6. The equipment has obvious signs of breakage.

7. Please disconnect this equipment from the AC outlet before cleaning. Do not use liquid

or detergent for cleaning. The use of a moisture sheet or cloth is recommended for

cleaning.

• Module and drive bays must not be empty! They must have a dummy cover.

Product features and specifications are subject to change without notice.

CAUTION :

risk of explosion if battery is replaced by an incorrect type.

dispose of used batteries according to the instructions.

After performing any installation or servicing, make sure the

enclosure are lock and screw in position, turn on the power.

SB122A-PH User's Manual

Chapter 1 Product Features

CHAPTER OVERVIEW

Chapter 1 Product Features

SB122A-PH is a flexible storage server barebone that is specifically designed to

accommodate diverse corporations and enterprises for managing heavy workloads

and multiple applications.

Chapter 2 Hardware Setup

This chapter displays an easy installation guide for assembling the hardware in this

product. Utmost caution for proceeding to set up the hardware is highly advised.

Most of the components are highly fragile and vulnerable to exterior inuence. Do

not endanger the device by placing the device in an unstable environment.

Chapter 3 Motherboard Settings

This chapter elaborates the overall layout of the motherboard that had been

designed for the the server, which include multifarious connectors, jumpers, and

LED descriptions. These descriptions assist in configuring various settings in the

motherboard.

Chapter 4 BIOS Configuration Settings

This chapter introduces the key features of BIOS, including the descriptions and

option keys for diverse functions. These details provide users to maintain and

congure input/output devices.

Chapter 5 BMC Configuration Settings

This chapter illustrates the diverse functions of IPMI BMC, including the details on

logging into the web page and assorted denitions. These descriptions are helpful

in conguring various functions through Web GUI without entering the BIOS setup.

For more information about BMC configurations, please refer to IPMI BMC

(Aspeed2400) User's Manual for a more detailed description.

Chapter 6 Hardware Specification

This chapter elaborates the overall layout of the hardware for this product,

including information for various connectors and LEDs. These elaborations are

useful in conguring your hardware.

Chapter 7 Technical Support

For more information or suggestion, please verify and contact the nearest AIC

corporation representative in your district or visit the AIC website. It is our pleasure

to oer the best service for our customers.

Chapter 1 Product Features

SB122A-PH User's Manual

1�1 Box Content

Before removing the subsystem from the shipping carton, visually inspect the physical

condition of the shipping carton. Exterior damage to the shipping carton may indicate

that the contents of the carton are damaged. If any damage is found, do not remove

the components; contact the dealer where the subsystem was purchased for further

instructions. Before continuing, first unpack the subsystem and verify that the number

and quality in the shipping carton is correct and in good condition.

• Enclosure( Power supply, fan, 2.5'' SSD tray included)

• Power cord • Screws kit x 1set

• Slide rail x 1set

♦PACKAGE CONTENT MAY VARY PER REGION.

Chapter 1� Product Features

• 2.5" SSD tray

SB122A-PH User's Manual

Chapter 1 Product Features

1.2 Specications

Dimensions

(W x D x H)

mm : 438 x 787.4 x 44.4

inches : 17.2 x 31 x 1.75

Motherboard AICServer Board Phoenix

Processor

Support product family

QPI Speeds 9.6 GT/s, 8.0 GT/s, 7.2 GT/s

Socket Type Socket R3 (FCLGA2011-3)

Chipset Support

System Memory

(4 memory channels per CPU;

2 channels with 2DPC and 2 channels with 1DPC)

- 384GB DDR4 2133/1866 RDIMM DRx4

- 96GB DDR4 2133/1866 RDIMM SRx4

- 768GB DDR4 2133/1866 LRDIMM QRx4

- 1536GB DDR4 2133/1866 LRDIMM 3DS 8Rx4

Front Panel

LEDs

Drive Bays

External 2.5” hot swap PCIe SSD 10

Internal 2

Backplanes 5 x 2-port PCIe backplanes with dual SFF-8643

connectors on each

Expansion Slots PCIe 3.0 1 x16, 1 x8

Riser Card

(included) PSG-RC-PH1U-2N-110 x16, 1 PCIe x8 and 10 PCIe x4

(SFF-8643) for NVMe

System BIOS

BIOS Type

FLASH Interface

BIOS

Features

Rear I/O

LAN 2 x 10GbE SFP+

2 x RJ45

USB 2 x USB 3.0 Type A

VGA 1 x DB-15

Serial Port 1 x DB-9

Power Supply

System Cooling 6 x 40x56mm 21500/18000 rpm hot swap fan modules

System

Management

Environmental

non-condensing

Gross Weight (w/ PSU & Rail)

kgs : 24

lbs : 53

Packaging

Dimensions(W x D x H)

mm : 590 x 1130 x 273

inches : 23.2 x 44.5 x 10.7

Mounting Standard 28" tool-less slide rail

On-board

Devices

SATAChipset with software RAID support

IPMI

Aspeed AST2400 Advanced PCIe Graphics &

Remote Management Processor

Serial over LAN

Network

Controllers

dual port, SFP+, PCIe v2.0 (5.0GT/s)

GbE controller, PCIe v2.1, 2.5 GT/s, x1

single port GbE, 1 Gbps

Graphics

Aspeed AST2400 Advanced PCIe Graphics &

Remote Management Processor

Inhaltsverzeichnis

Andere AIC Server Handbücher

AIC

AIC Rack Venus Bedienungsanleitung

AIC

AIC HA202-PV Bedienungsanleitung

AIC

AIC J4078-01 Bedienungsanleitung

AIC

AIC SB101-LB Bedienungsanleitung

AIC

AIC GB109-CT Bedienungsanleitung

AIC

AIC SB401-VG Bedienungsanleitung

AIC

AIC SB101-UR Bedienungsanleitung

AIC

AIC HA401-VG Bedienungsanleitung

AIC

AIC SB303-GE Bedienungsanleitung

AIC

AIC SB303-LB Bedienungsanleitung

AIC

AIC FB127-LX Bedienungsanleitung

AIC

AIC SB202-LE Bedienungsanleitung

AIC

AIC SB201-LB Bedienungsanleitung

AIC

AIC CB117-OT Bedienungsanleitung

AIC

AIC JBOD Series Bedienungsanleitung

AIC

AIC FB201-LX Bedienungsanleitung

AIC

AIC SB212-PH Bedienungsanleitung

AIC

AIC SB402-LB Bedienungsanleitung

AIC

AIC SB102-VG Bedienungsanleitung

AIC

AIC SB102-UR Bedienungsanleitung

AIC

AIC SB202-SP Bedienungsanleitung

AIC

AIC TB101-HA Bedienungsanleitung

AIC

AIC HA202-PH Bedienungsanleitung

AIC

AIC CB201-Z1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung