Aim EcuMaster EMU Black Bedienungsanleitung

AiM User Guide

EcuMaster EMU Classic/

EMU Black – RS232

Release 1.01

Supported models

This user guide explains how to connect EcuMaster ECU to AiM devices. Supported model is:

•EcuMaster EMU Classic

•EcuMaster EMU Black

Software setup

Both EMU Classic and EMU Black ECU need a software setup to correctly communicate with AiM

devices via RS232. For both ECUs, you need to set "AiM Dashboard" device as shown here below.

Wiring connection

Below, the connectors pinouts are represented for both EMU Classic and EMU Black

3.1

EMU Classic

EMU Classic ECU features serial communication protocol on EMU extension port (ECU rear side) whose

pinout is shown below with the connection table.

Please note: with serial communication protocol it is mandatory to connect ECU GND with AiM device

GND as well as ECU TXD is to be connected to AiM ECU RS232 TX (or AiM RS232RX for older products)

and vice versa.

3.2

EMU Black

EMU Black ECU, as well, features serial communication protocol on EMU Black front connectors whose

pinout is shown below:

RS232TX: pin 11; 39 pins connector (Black)

RS232RX: pin 24; 39 pins connector (Black)

Please note: with serial communication protocol it is mandatory to connect ECU GND with AiM device

GND as well as ECU TXD is to be connected to AiM ECU RS232 TX (or AiM RS232RX for older products)

and vice versa.

AiM device configuration

Before connecting the ECU to AiM device set it up using AiM Race Studio software. The parameters to

select in the device configuration are:

•ECU manufacturer “AIM”

•ECU Model “PROT_UART”

Available channels

Channels received by AiM devices connected to “AIM” "PROT_UART" protocol are:

ID CHANNEL NAME FUNCTION

ECU_1 AIM_RPM RPM

ECU_2 AIM_WHEELSPD Wheel Speed

ECU_3 AIM_OILPRESS Oil pressure

ECU_4 AIM_OILTEMP Oil temperature

ECU_5 AIM_WATERTEMP Engine coolant temperature

ECU_6 AIM_FUELPRESS Fuel pressure

ECU_7 AIM_BATTVOLT Battery supply

ECU_8 AIM_THROTANG Throttle angle

ECU_9 AIM_MANIFPRESS Manifold air pressure

ECU_10 AIM_AIRCHARGETEMP Intake air temperature

ECU_11 AIM_EXHTEMP Exhaust gas temperature

ECU_12 AIM_LAMBDA Lambda value

ECU_13 AIM_FUELTEMP Fuel temperature

ECU_14 AIM_GEAR Engaged gear

ECU_15 AIM_ERRORFLAG Error flag

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Aim Kabel und Steckverbinder Handbücher

Aim

Aim Pectel T2 ECU Betriebsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung