Aim AS17C Bedienungsanleitung
DRY / STEAM,
SPRAY & SURGE
IRON
2200 W
• CERAMiC SOLEPLATE
• 250 ML WATER TANK
• WATER LEVEL iNDiCATOR
• SELF CLEANiNG FUNCTiON
• POWER INDiCATOR LiGHT
• DRY IRON
• STEAM IRON
• BURST OF EXTRA STEAM
USER MANUAL
INDEX
• IMPORTANT SAFEGUARDS
• KNOW YOUR STEAM IRON
• USING YOUR STEAM IRON
• CLEANING AND MAINTENANCE
• IRONING TIPS
• WARRANTY
• REPAIRS PROCEDURE
3
4
6
8
9
10
11
3 |
USER INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using the Steam Iron, basic safety precautions should
always be followed including the following:
1. Read all instructions before using.
2. Before using check that the voltage of wall outlet corresponds to the
one shown on the rating plate.
3. Burns may occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a steam iron upside down as there may
be hot water in water tank.
4. If any part is damaged it must be replaced by the manufacturer or
anauthorizedserviceagentoraqualiedtechnicianinorderto
avoid a hazard.
5. Don’toperateanyappliancewithadamagedcordorplugorafter
the appliance malfunctions, or is dropped or damaged in any
manner, Return the appliance to the nearest authorized service
facility for examination, repair or electrical or
mechanical adjustment.
6. Do not let cord hang over edge of table or hot surface.
7. The plug of power cord must be removed from outlet before water
tankislledwithwater.
8. Unplugfromoutletwhennotinuse,beforellingwaterorcleaning.
9. Do not operate the iron for other than its intended use.
10. To protect against a risk of electric shock, do not immerse the iron
in water or other liquids.
11. Close supervision is necessary for any appliance being used by
or near children.
Please read this instruction manual carefully before using for
the rst time, and always keep these instructions.
| 4
IMPORTANT SAFEGUARDS - CONTINUED
12. Do not leave iron unattended when connected into power supply
or on an ironing board.
13. Do not use outdoors.
A. Soleplate
B. Spraying Water Outlet
C. Water Tank Inlet
D. Variable Steam / Self Cleaning Button
E. Steam Shot Button
F. Spraying Water Button
G. Indicator Light
H. Cord Brushing
I. Temperature Dial
KNOW YOUR STEAM IRON
5 |
KNOW YOUR STEAM IRON - CONTINUED
Soleplate
Ceramic Soleplate can be heated up and be used to iron garments.
Spraying Nozzle
When pressing spraying water button instantly, water is sprayed from this
outlet.
Water Tank Inlet
Filling water into water tank from it, make sure water should not exceed the
maximum level (250 ml) as indicated on water tank.
Steam Shot Button
Pressing the button instantly provides a powerful shot of steam to eliminate
stubborn wrinkles.
Variable Steam Button
Move the button to select the desired steam output for each garment, if
selecting the “off” position, it indicates ironing without steam.
360° Cord Bushing
Cord bushing allows free movement of power cord in any direction with
great maneuverability when ironing.
Indicator Light
When indicator light is illuminated, it indicates that the iron is heating; it will
go out when it has reached the selected temperature.
Temperature Dial
Turn the dial to set the ironing temperature to suit the garment being ironed.
| 6
USING YOUR STEAM IRON
BEFORE FIRST USE
1. Remove any sticker, protective foil or storage cover from the soleplate.
2. Heat up the iron to maximum temperature and iron over a piece of damp
cloth for several minutes to remove any residue on the soleplate.
Note: It is normal that a strange odour comes out from the unit for the
rstuse.
OPERATION
3. Holdtheironinatiltedposition,usingthemeasuringcuptollwaterinto
the water tank. Ensure not to exceed the maximum level on the tank. See
g1.
4. Press down cover of water tank and you will hear a click if it is in the
correct position.
5. Connect plug to outlet and turn temperature dial to your desired setting,
which is depended on the fabric of garment. And indicator light will be
illuminated. Refer to Fig.2 and IRONING TIPS latter.
6. Makesuresteambuttonisondryposition.(Seeg3),thenplacethe
ironvertically(Seeg4).
7 |
7. Once soleplate temperature has reached the preset temperature,
indicator light will go off, then set steam button to your desired steam
output or dry position and begin ironing.
WARNING: Do not touch hot soleplate at any time!
8. Press spraying water button a couple of times to dampen the laundry
if necessary, before spraying make sure that there is enough water in
water tank.
9. Steam shot function must be used at maximum temperature, as it helps
remove stubborn creases.
10. The iron has an anti-drip function: if ironing garments for long time,
soleplate temperature will decrease, the iron will stop producing steam
automatically and no water droplets will form from the soleplate.
11. “Steam shot” can also be applied when holding the iron in a vertical
position, so this is useful for removing creases from hung clothes,
curtains, etc.
| 8
CLEANING AND MAINTENANCE
AFTER IRONING
1. Disconnect power supply and empty the water left in water tank.
2. Reconnect into power supply and disconnect after indicator light goes
off, ensuring the soleplate is dry.
3. Lettheironcompletelycooldown,thenwipeakesandanyother
deposits on the soleplate with a damp cloth or a non-abrasive
(liquid) cleaner.
4. Clean the upper part of iron with a damp cloth.
5. Always store the emptied iron horizontally on a stable surface with a
cloth protecting the soleplate.
SELF-CLEAN FUNCTION
The iron should be cleaned regularly according to hardness of water and
using frequency.
1. Fill water into the water tank and set the temperature selector to
maximum position
2. Connect into power supply and indicator light will be illuminated, make sure
SteambuttonisintheDryposition,thenplaceironasg.4
Warning: never pour white vinegar or other liquid cleaners for
eliminating calcium into water tank!
3. Once the light is off, hold the iron over the sink and turn steam button to
SELF CLEAN position (Fig.3) with a little force. Steam and boiling water will
comeoutofthesoleplatewhileimpuritiesandakeswillbeushedout.
4. Releasethebuttonassoonaswaterinthewatertankhasbeennished.
9 |
IRONING TIPS
1. Alwayscheckrstwhetheralabelwithironinginstructionsisattachedto
the article. Follow these ironing instructions in any case.
2. The iron heats up quicker than cooling it down, therefore, you should
start ironing the articles requiring the lowest temperature such as those
madeofsyntheticbre.
3. Ifthefabricconsistsofvariouskindsofbres,youmustalwaysselectthe
lowestironingtemperaturetoironthecompositionofthosebres.
4. Silk and other fabrics that are likely to become shiny should be ironed
on the inner side. To prevent staining do not spray water straight on silk
or other delicate fabrics.
5. Velvet and other textures that rapidly become shiny should be ironed in
one direction with light pressure applied. Always keep the iron moving
at any moment.
6. Pure woolen fabrics (100% wool) may be ironed with the iron set a
steam position. Preferably set steam button to the maximum position and
use a dry cloth as a mat.
Note: when ironing woolen fabrics, shining of the fabric may occur.
So it is suggested that you should turn the article inside out and iron
the reverse side.
ADDITIONAL TABLE
Note: ÒÃÓ stands for being able to use;
Symbol Fabric Temp. Variable
Steam Steam
Shot Spraying
Water
0
MAX
Synthetic
fibres/Silk
Wool
Cotton
Linen
Note : the symbol means: "This article cannot be ironed!”
X
| 10
TheManufacturerherebyprovidesawarrantytotheoriginalpurchaserofthisproduct(‘the
consumer’)thatthisproductwillbefreeofmanufacturingdefectsinmaterialsandworkmanship
which under normal, personal, family or household use (commercial use expressly excluded)
manifest themselves within the 2 year from the date of purchase.
EXCLUSIONS
• The warranty does not include and will not be construed to cover products damaged as a
result of disaster, misuse, commercial use, not in accordance within the written instructions
includedwiththeproduct,abuseand/oranynon-authorisedmodicationoftheproduct,
incorrect installation of the product or normal wear and tear.
• Insect infestation of the electrical or motor makes the claim invalid.
• Customer abuse do not fall under the warranty.
WAIVER
The warranty and the obligations of the Manufacturer provided herein are in lieu of, and the
consumer, waives all other warranties, guarantees, conditions or liabilities, express or implied,
arising by law or otherwise, including without limitation, any obligation of the manufacturer in
respect of any injury, loss or damage (direct, indirect or consequential) arising out of the use of,
orinabilitytousethisproductandwhetherornotoccasionedbythemanufacturer’snegligence
or any act or omission on its part.
PROOF OF PURCHASE
Any claim in terms of the warranty must be supported by a proof of purchase. If such proof
isnotavailable,thennotwithstandinganythingtothecontraryherein,theserviceagent’s
prevailing charges for services / repairs and / or spares will be payable by the Consumer upon
collection of the repaired product. The Consumer should call the Pick n Pay CUSTOMER
CARE number on 0860 30 30 30 (only in South Africa). Customers residing outside South
Africa can return the product back to a Pick n Pay store. During the warranty period the product
mayonlybeservicedand/orrepairedbytheManufacturer’sdulyauthorisedagent(s).
2 YEAR LIMITED WARRANTY
If this product proves to
be faulty during normal
use due to defective
materials or workmanship.
Refer to our website for
terms and conditions.
Inhaltsverzeichnis
Andere Aim Eisen Handbücher
