AIO ROBOTICS Zeus Bedienungsanleitung
ZEUS
QUICK-START GUIDE
Getting started
Insert power cable in back, switch on 6Unwrap lament and feed through tube
5Press front on button for 1 second
Open door by lifting up and back 3Place turnable 3 pins facing down
2Remove interior packaging
4
4
Remove
test printout
7Wind excess back onto spool 9Press park button
8Press control button
Select a le 14 If .STL is selected you’ll be asked to slice
Feed lament all the way down 12 Press print to access les
11 Prep plate with thin layer of glue
10
13
Squeeze tabs with
thumb and index
A
1
Recommended: start with a Gcode preloaded test
Select OK 18 Lift glass plate and carefully remove object
from plate when printing is complete.
17 Print with lid open for best results
16
NB: “Box” test le print time:
> 8 mins
Printing starts with automated bed leveling
14 Select print
Refer to manual for on-board slicing
Printing starts after extruder hits target temperature
Extruder will rst print a stripe at front of plate
Spool feeds clockwise
Included Accessories
Filament Scanner Calibration Pattern Scan powder + applicator Spatula (printout remover)
Glue Stick Wi dongle Power supply Turn table
B
Connecting ZEUS to the web
Insert wi dongle Optional:ethernet Select WIFI icon Select your local
wireless network.
Enter password.
C
A. Wi is connected
B. Ethernet is
connected (defaults
to ethernet if
connected)
AB
USB 3Ethernet
2Wi
1
NB: “Box” test le print time:
> 8 mins
When ZEUS is off line
File Transfer Options (refer to manual for details)D
For le transfer via wi or ethernet, enter IP address (A or B) in computer browser to access Pydio. Login: aio Password: aiorobotics
Home Control System menu
ZEUS UI - the basicsE
Online settings
Use caution when handling the Thunderbolt Extruder. Do not touch when extruder lights are blue.
Never remove the extruder during or immediately after printing.
WarningsF
Inhaltsverzeichnis
Andere AIO ROBOTICS 3D-Drucker Handbücher
