Airlink101 Raven G3210 Betriebsanleitung

How to use Airlink Raven CDMA/GPRS

Modems with Z-max ?

1 Introduction........................................................................................................................1

2 CDMA/GSM connection to a Z-max base.........................................................................2

2.1 Modem activation.......................................................................................................2

2.2 Modem configuration.................................................................................................2

2.2.1 Base side.............................................................................................................2

2.2.2 Rover side...........................................................................................................3

3 CDMA/GPRS connection to iCGRS..................................................................................4

3.1 Modem activation.......................................................................................................4

3.2 Modem installation for the rover................................................................................4

3.2.1 First step - configuration of the modem.............................................................4

3.2.2 Second step – configuration of Z-max...............................................................5

3.2.3 Third step – Using Z-max with Airlink modem.................................................6

3.2.4 Hang-up..............................................................................................................7

4 Reminder............................................................................................................................8

5 Troubleshooting .................................................................................................................9

1Introduction

This document provides all technical information required in order to connect CDMA or

GPRS Airlink modem to:

oa Z-max base

oan iCGRS base or any other GPS station that is streaming data on a socket (IP address

and port number)

This procedure is only valid for the following modems from Airlink:

•Raven GPRS modem G3210 or G3211

•Raven CDMA modem C3210

For the use of Airlink GSM or CDMA modem a special kit from Thales Navigation is

designed : Kit external Raven modem for Z-max (Ref:990572-01).This kit includes the

following items:

•A Serial cable (Ref:702078) to connect the serial port of Z-max to the modem

•A power cable (Ref: 702079) to power the modem from a battery

•A 11.1V / 6Ah Li-Ion battery (Ref:110284)

•A battery charger (Ref:110049)

•A Blue backpack RTK Z-max (Ref:205044)

17/08/2007 1/ 21/

2CDMA/GSM connection to a Z-max base

2.1 Modem activation

The modem activation is a procedure that allow to the modem to be registered to the selected

wireless operator. This procedure has only to be done for the first use of the modem. This

procedure must be done for the rover and the base modems.

You should refer to the appendix 1, to activate the CDMA or GSM modem.

2.2 Modem configuration

The modem configuration is a procedure that allow to the modem to be configured in order to

initialize the modem for the base and to dial the base phone number for the rover. In the case

of a connection to a Z-max base, the connection will be based on Circuit Switched Data

connection, with invoice based on the duration of communication. Please refer to you local

wireless operator to know more about billing.

2.2.1 Base side

The Allegro terminal with FastSurvey shall be connected to Z-max either by Bluetooth

wireless link or serial cable to port A.

Port A

Serial cable

Bluetooth

In Fast Survey utility you will find, a terminal utility that allow sending command to Z-max.

Send the following commands to Z-max for initializing the base modem:

Commands to send with Allegro terminal connected to port B of Z-max:

Command to send to Z-max Response from Z-max Comments

$PASHS,SPD,A,9 $PASHR,ACK Set PortA in 115.2Kbps

$PASHS,DSY,A,B<CR><LF> $PASHR,ACK Set Z-max in transparent mode

$PASHS,DSY,B,A<CR><LF> $PASHR,ACK Set Z-max in transparent mode

AT\APASSTHRU<CR><LF> OK Wait 30 seconds before continue

ATS0=1<CR><LF> OK Set the number of ring before

connection

$PASHS,DSY,OFF<CR><LF> $PASHR,ACK Remove the transparent mode

Commands to send with Allegro terminal connected to Z-max through Bluetooth

Command to send to Z-max Response from Z-max Comments

17/08/2007 2/ 21/

$PASHS,SPD,A,9 $PASHR,ACK Set PortA in 115.2Kbps

$PASHS,DSY,A,C<CR><LF> $PASHR,ACK Set Z-max in transparent mode

$PASHS,DSY,C,A<CR><LF> $PASHR,ACK Set Z-max in transparent mode

AT\APASSTHRU<CR><LF> OK Wait 30 seconds before continue

ATS0=1<CR><LF> OK Set the number of ring before

connection

$PASHS,DSY,OFF<CR><LF> $PASHR,ACK Remove the transparent mode

The CDMA/GSM modem base is initialized, and ready to be used by the rover.

2.2.2 Rover side

The Allegro terminal with FastSurvey shall be connected to Z-max either with Bluetooth

wireless link or serial cable to port A.

Port A

Serial cable

Bluetooth

In Fast Survey utility you will find, a terminal utility that allow sending command to Z-max.

2.2.2.1 Dialing to the base

Commands to send with Allegro terminal connected to port B of Z-max

Command to send to Z-max Response from Z-max Comments

$PASHS,SPD,A,9 $PASHR,ACK Set PortA in 115.2Kbps

$PASHS,DSY,A,B<CR><LF> $PASHR,ACK Set Z-max in transparent mode

$PASHS,DSY,B,A<CR><LF> $PASHR,ACK Set Z-max in transparent mode

AT\APASSTHRU<CR><LF> OK Wait 30 seconds before continue

ATD Base Phone Number OK Dial to the base phone number

$PASHS,DSY,OFF<CR><LF> $PASHR,ACK Remove the transparent mode

Commands to send with Allegro terminal connected to Z-max through Bluetooth

Command to send to Z-max Response from Z-max Comments

$PASHS,SPD,A,9 $PASHR,ACK Set PortA in 115.2Kbps

$PASHS,DSY,A,C<CR><LF> $PASHR,ACK Set Z-max in transparent mode

$PASHS,DSY,C,A<CR><LF> $PASHR,ACK Set Z-max in transparent mode

AT\APASSTHRU<CR><LF> OK Wait 30 seconds before continue

ATD Base Phone Number OK Dial to the base phone number

$PASHS,DSY,OFF<CR><LF> $PASHR,ACK Remove the transparent mode

After a few seconds the rover is connected to the base, and receive data from the base

2.2.2.2 Hang-up the rover

Just disconnect the Airlink modem from its power source.

17/08/2007 3/ 21/

3CDMA/GPRS connection to iCGRS

3.1 Modem activation

The modem activation is a procedure that allow to the modem to be registered to the selected

wireless operator. This procedure has only to be done for the first use of the modem.

You should refer to the appendix 1, to activate the CDMA/GPRS modem.

3.2 Modem installation for the rover

Before using the Airlink modem, you need to configure the modem and Zmax, in order the

connection to iCGRS be automatic after power on of the modem. This configuration

procedure must only be done at the first use of the modem.

3.2.1 First step - configuration of the modem

What you need :

-A computer with a serial port

-A Airlink Raven modem (GPRS or CDMA) and its antenna

-A serial cable used for connecting the Raven modem to your computer

-A power source for supplying the modem (see the Li-Ion battery provided by Thales )

-The public IP address and port number of the iCGRS on which you want to be

connected, or any other server that is streaming data on a given socket.

-WirelessAce software on your computer ( You can download it at

http://www.airlink.com/support/modems/modem_utils.asp )

Execute the WirelessAce software, and select the connect button with PPP:COM1 if the

Airlink modem is connected on COM1 and enter 12345 for password (default value)

The following screen should appear:

17/08/2007 4/ 21/

Once all parameters are displayed on the screen modify the following parameters:

-S53 Destination address -> Set the IP address of the iCGRS station ( Ask to the

iCGRS manager which IP address is given for the iCGRS)

-S53 Destination port -> Set the selected port of the iCGRS station ( Ask to the iCGRS

manager which port number is allocated to you)

-S53 Default Dial Code =T

-MD Startup Mode Default =4

-S211 DTR Mode = 1

-TCPS Connection timeout unit =0

-TCPT Connection timeout (minute) =1

Then click "write" for saving these parameters into the modem.

The modem is ready to use.

3.2.2 Second step – configuration of Z-max

What you need:

-A Field terminal like allegro (optional: a serial cable to connect the Allegro terminal to

Z-max) with FastSurvey

-A Z-max rover

-A Battery module or any other source power compatible with Z-max

17/08/2007 5/ 21/

Serial cable

Bluetooth

Execute FastSurvey, and after initializing the connection with Z-max :

-Select the “Equip” tab.

-Select “Receiver utilities” button

-Select “Send command to receiver”

-Send the following command to the receiver followed by OK

Command to send to Z-max (*) Response from Z-max Comments

$PASHS,SPD,B,9 $PASHR,ACK Set PortB in 115.2Kbps

$PASHS,PRT,B,232 $PASHR,ACK Set port B in RS232 mode

$PASHS,NME,GGA,B,ON $PASHR,ACK Send GGA message to port B in order

to intiate the connection to iCGRS

$PASHS,SAV,Y $PASHR,ACK Save this configuration into Z-max

(*) You can also use a computer, with the appropriate cable connected to Z-max, and send

these command with Hyperterminal software utility from Windows suite.

3.2.3 Third step – Using Z-max with Airlink modem

What you need:

-A Z-max rover

-A Airlink Raven modem (GPRS or CDMA)

-A serial cable for connecting the Airlink /Raven modem to Z-max (Ref:702078)

-A cable for connecting the modem to the battery (Ref: 702079)

-A 11.1V 6Ah Li-Ion Battery (Ref:110284)

-All traditional accessories required for on the field work

The Allegro terminal with FastSurvey shall be connected to Z-max either by Bluetooth

wireless link or serial cable to port A.

Serial cable

Bluetooth

Port A

Port B

« Y » cable

17/08/2007 6/ 21/

It is not necessary to send specific command to Z-max, or fast Survey: As soon as the Airlink

Raven modem is powered, an automatic connection procedure will occur to the iCGRS station

selected during the first step of configuration.

Z-max is ready to be used for RTK operation, with correction data on portB.

3.2.4 Hang-up

Just disconnect the Airlink modem from its power source.

17/08/2007 7/ 21/

4Reminder

Port A or B provides serial link and power access to Z-max.

Port A Port B

RS-232 serial link:

•With hardware (RTS/CTS) flow

control software enabled/disabled

RS-232 / RS-422 serial link

•RS232 or 422 selection through

$PASHS command

•In case of RS422 no hardware flow

control

+12V DC power:

•Current shall be lower than 800mA

•Protected against short-circuit

+12V DC power

•Current shall be lower than 800mA

•Protected against short-circuit

Pinout:

1- +12V DC voltage

2- GND

3- CTSA

4- RTSA

5- RXDA

6- TXDA

7- 1 PPS OUT

Pinout:

1- +12V DC voltage

2- GND

3- CTSA/RX-

4- RTSA/TX+

5- RXDA/RX+

6-TXDA/TX-

7- EVENT

17/08/2007 8/ 21/

5Troubleshooting

Symptoms Action

Z-max is not responding •Check the cable or the Bluetooth link

•Check if the baud rate match with

current baud rate in Z-max

No response after a dial to a Z-max base •Check the connection of the antenna

on the modem

•Check with a cell phone if the area is

covered by the operator

•Check the power and the configuration

of the base

•Check that Z-max is not busy (already

online)

No response after a dial to a iCGRS station •Check the connection of the antenna

on the modem

•Check with a cell phone if the area is

covered by the operator

•Check IP and port parameters of the

station

•Check the port is not busy (already

online)

Frequently disconnection to the base •Check the connection of the antenna

on the modem

No response after AT command •Check baud rate of port A

(115.2Kbps)

•Check the +12V power of the modem.

In any case the voltage shall be

between 10 and 28V

17/08/2007 9/ 21/

Appendix 1

Activation of CDMA and GPRS Raven modem

From Airlink

17/08/2007 10/ 21/

Andere Handbücher für Raven G3210

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Airlink101 Modem Handbücher

Airlink101

Airlink101 H4223-CD - Raven X HSUPA Bedienungsanleitung

Airlink101

Airlink101 XR90 Bedienungsanleitung

Airlink101

Airlink101 H4323-C - PinPoint X HSUPA Bedienungsanleitung

Airlink101

Airlink101 Redwing CDMA Bedienungsanleitung

Airlink101

Airlink101 Redwing CDMA Series Bedienungsanleitung

Airlink101

Airlink101 Redwing CDMA Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung