Airlinkplus ATVUSB05 Bedienungsanleitung
Quick Installation Guide
Model # ATVUSB05
Section 1
Getting Started
Please review the following package contents and minimum system requirements
before proceeding to install the Vision+ TV box. If your computer does not meet the
minimum system requirements, the TV box may not work properly.
1.1 Package Contents
Unpack your Vision+ TV box and make sure that all the items are intact. The following
items should be included in your package:
lVision+ TV box
lAudio Cable
lComposite to S-Video Converter Cable
lPowerAdapter
lQuick Installation Guide
lInstallation CD
lRemote Control [requires two AAA batteries (not included)]
1.2 Minimum System Requirements
lIntel Pentium 4 2.0GHz or above CPU
l256 MB RAM
l200 MB available hard disk space
lOne available USB port (USB 2.0 recommended)
lMicrosoft Windows 2000/XP
lVGA with 800x600 16-bit resolution (DirectX 9 supported)
lAC 97 compatible sound card
lSpeakers for audio output
lCD-ROM drive
Section 2
Upgrading USB 2.0 Host Controller Driver
Before you plug the Vision+ TV box to your computer’s USB 2.0 port, please check
your USB 2.0 device driver first. If your USB 2.0 host controller driver is not the latest
version or provided by Microsoft, we strongly recommend you use our USB 2.0
update utility. It will help you to upgrade your USB 2.0 driver to the latest version
released by Microsoft in order to avoid some compatibility issues. Please follow the
steps below to upgrade your USB 2.0 host controller driver.
Note: DO NOT connect the Vision+ TV box to your computer when you are using the
USB update utility.
Step 1 Turn on your computer. After Windows has finished loading, insert the
provided Installation CD into your CD-ROM drive. The autorun page will automatically
detect your USB 2.0 host controller device. If your host controller is not the latest
version or provided by Microsoft, the USB update utility will display the following
warning message:
Note: If your USB 2.0 driver is already the latest version, you would not see the above
warning message. Skip to Section 3 Installing Hardware to install the Vision+ TV
box.
Step 2 Click OK to begin the update process.
Step 3 Select Yes, I want to reboot my computer right now and click OK.
Step 4 After the computer reboots, theFound New Hardware Wizard will guide you
to install the updated USB driver. Click Next to continue.
Step 5 Select Search for a suitable driver for my device and click Next. (For
Windows XP, select Install software automatically and click Next).
Step 6 Uncheck all the boxes under Optional search locations and click Next.
Step 7 Windows will find the driver file automatically. Click Next.
Step 8 Click Finish to complete the driver installation.
Step 9 Leave your computer powered on and proceed to Section 3 Installing
Hardware.
Section 3
Installing Hardware
After you have updated the USB 2.0 host controller driver to the latest version, you
can install the Vision+ TV box. Please refer to the diagram below as you follow the
installation procedures.
Note: Be sure to follow the steps carefully and plug in the USB 2.0 connector last.
Step 1 Connect the coaxial cable for the TV antenna/cable to the TV port of the TV
box.
Step 2 Connect the S-Video cable from you video source to the S-Video port of the
TV box. If you don’t have an S-Video cable, use the provided Composite to S-Video
converter cable.
Step 3 Connect the audio cable from your audio source to the AUD-IN port of the TV
box.
Step 4 Connect one end of the provided Audio Cable to theAUD-OUT port of the TV
box and connect the other end to the Line In port of your sound card.
Step 5 Connect one end of the power adapter to the Power Adapter port of the TV
box and connect the other end to an electrical outlet.
Step 6 Connect the USB 2.0 connector from the TV box to an USB 2.0 port on your
computer.
Section 4
Installing TV Box Driver
Before installing the driver, it is highly recommended that all background applications
such as antivirus software and system monitoring programs be disabled first.
Step 1 When you plug in the USB 2.0 connector to the USB 2.0 port of your
computer, the Found New Hardware Wizard will appear. Click Cancel to quit the
wizard and insert the provided Installation CD.
Note: If the setup menu does not appear automatically, go to Start, Run, and type
D:\ksetup.exe (whereD istheletterofyour CD-ROMdrive)and clickOK.
Step 2 The setup menu will automatically appear. Select Driver_Install to start the
driver installation.
Step 3 ClickNext to install the driver for the Remote Control.
Step 4 Click Next to install the driver for the TV box.
Step 5 Click Next to launch the TVSetup utility.
Step 6 Click TV System to configure the setting.
Step 7 For U.S.A., select NTSC as your TV System and click OK.
Step 8 Unplug the USB 2.0 connector from your computer, re-plug the connector, and
click OK.
Step 9 Select Yes, I want to restart my computer now and click Finish to restart
your computer.
Note:If you want to re-configure the TV system, you can run the “TVSetup” utility to
change the setting. Click Start, Programs, Airlink+, TV2800, TVSetup to execute
the program.
Section 5
Installing PVR PLUS
PVR PLUS is a set of utilities that allow you to watch TV on your computer, edit video
clips, burn DVDs, and more. Before installation, it is highly recommended that all
background programs such as antivirus software and system monitoring programs be
disabled first.
Step 1 Insert the provided Installation CD-ROM.
Step 2 SelectPVR PLUS at the setup menu. If the setup menu does not appear
automatically, go toStart,Run, and typeD:\ksetup.exe (whereDistheletterofyour
CD-ROM drive) and click OK.
Andere Handbücher für ATVUSB05
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Airlinkplus Set-Top-Box Handbücher
