PAIRING YOUR REMOTE & FOUNTAIN
Step 1 Choose which zone you want to assign the lights (1 to 4).
Step 2 Switch o the main power supply of the lights in the selected zone
with the main switch or pull the plug from the socket.
Step 3 Switch the lights on again and within 3 seconds shortly press one of
the “Zone On” buttons, one time, on the remote control.
Step 4 When the link operation is successful, the lights will slowly blink on
and o 3 times.
BASIC CONTROL FUNCTIONS
• Press and Hold Master ON or ZONE ON for several seconds to turn all
lights to white mode.
• Touch the color ring to adjust lights to any color.
• Change the brightness by using the brightness slide ring.
• Adjust flash speed for any preset program using the speed buttons.
Preset Programs/Modes
Press the “M” Mode button to scroll through the pre-programmed light settings.
Program 1 - RGBW Fade In/Fade Out Fades in and fades out the color red, green,
blue and white one after another.
Program 2 - Color Flash Red, green, blue, white, yellow and purple flashes.
Program 3 - Disco Multiple colors strobe and flash.
Program 4 - Red Color Ramp Up and Flash Red color brightens from 0%‐100%
and shuts down, then flashes three times.
Program 5 - Green Color Ramp Up and Flash Green color brightens from
0%‐100% and shuts down, then flashes three times.
Program 6 - Blue Color Ramp Up and Flash Blue color brightens from 0%‐100%
and shuts down, then flashes three times.
Program 7 - Color Change and Flash Several colors fade into each other and then
flash randomly.
Program 8 - Fade In/Fade Out Several colors fade into each other.
Program 9 - Strobe White White color flashes.
3
P.O.Box 38 | Romeo, MI 48065 3
