Aironet 4800B Series Bedienungsanleitung
4800B Series PC Card
Wireless LAN Adapter
Quick-Start Guide
PC4810B, PC4820B
DOC-710-005315-A0
Aironet Wireless Communications, Inc. •3875 Embassy Parkway
Akron, Ohio 44333-8357
www.aironet.com
Aironet Wireless Communications, Inc.
No part of this document may be reproduced or transmitted in any
means, electronic or mechanical, without the written permission of
Aironet. Information in this document is subject to change without
notice. Aironet makes no representation or warranties with
respect to the contents of this manual and specifically disclaims
any express or implied warranties of merchantability or fitness for
any particular purpose.
1999 Aironet Wireless Communications, Inc.
All rights reserved.
4800B Series, PC4800, PC4810B, PC4820B,
PCI4800B, PCI4810B, PCI4820B, 4800B Series, and
Aironetare trademarks of Aironet Wireless Communications,
Inc.
Other trademarks and trade names may be used in this document
to refer to either the entities claiming the marks and names or
their products. Aironet disclaims any proprietary interest in
trademarks and trade names other than its own.
Printed in USA.
DOC-710-005315-A0
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
1
Introduction: Aironet 4800B Series
PC Card Wireless LAN Adapter
Overview
The Aironet 4800B Series PC Card Wireless LAN Adapter lets
you connect to your network through a wireless connection. You
use the Wireless LAN Adapter Utilities to manage card settings,
check connectivity, and estimate system range.
Before you begin Installation
Before installing the network driver software, obtain the
following information from your MIS department:
•Your Wireless Client Name
•Your Wireless SSID
•For Windows 98 networking, your computer name and
workgroup name
•For your network account, your user name and password
•Your IP address (unless using a DHCP server)
Installation Requirements
Before you begin installation, make sure that you have the
following items:
•The Aironet 4800B Series Wireless LAN Adapter
•The Aironet 4800 Series CD for your operating system
If either of these items is missing from the Aironet 4800B Series
Card package, contact your PC card supplier.
You also need a computer with a PCMCIA Type II or III slot to
use the Aironet 4800B Series PC Card Wireless LAN Adapter.
This Guide is arranged according to Operating Systems. If your
operating system is:
Windows 98....... ...... see page 2
Windows 95....... ...... see page 4
Windows NT 4.0 ...... see page 7
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
2
Installing the Aironet 4800B Series
PC Card Wireless LAN Adapter
Follow the instructions below to install the Aironet 4800B Series
Wireless LAN Adapter.
This Quick-Start Guide is arranged according to Operating
Systems. If your operating system is:
Windows 98....... ...... see page 2
Windows 95....... ...... see page 4
Windows NT 4.0 ...... see page 7
Installing in Windows 98
1. Remove all PC Cards from your computer and turn it
on.
2. Hold the Aironet 4800B Series Wireless LAN Adapter
with the label facing up, and insert the card into the slot,
applying just enough pressure to make sure it is fully
seated.
Note: The PC Card slot will be on the left or right side
of the computer, depending on the model.
Caution: Do not force the PC Card into the slot or you
may bend the pins inside the slot.
Windows 98 automatically detects the Aironet 4800B
Series PC Card Wireless LAN Adapter, briefly opens a
New Hardware Found window, and starts collecting
information for a driver information database.
When Windows 98 is ready to configure the new
hardware, it opens the Add New Hardware Wizard
dialog box. The dialog box states that Windows will
search for new drivers for the Aironet-PC4800.
3. Click “Next.” A dialog box appears asking what you
want Windows to do.
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
3
4. Select “Search for the best driver for your device
(Recommended)” and click “Next.”
5. Select “CD-ROM drive,” unselect all the other options,
insert the Aironet 4800B Series for Windows 98 CD,
and click “Next.”
Note: If your computer doesn’t have a CD-ROM drive,
go to the Aironet website (www.aironet.com) and
download the drivers for your computer’s operating
system. Copy the drivers to a 3.5” floppy disk and use
the floppy disk in place of the CD.
After the hardware wizard finds the installation files on
the CD, it displays the search results: “Windows driver
file search for the device: PC4800B DS Wireless
PCMCIA LAN Adapter.”
6. Click “Next” to copy the required files.
During the installation, you may be prompted with
dialog boxes asking you to enter a path to the required
Windows 98 files.
If the Windows 98 files are installed on your computer,
the Windows 98 files will be located in the folder
C:\Windows\Options\Cabs. Click “OK” to copy the
required files.
If Windows 98 prompts for the Windows CD, insert the
Windows 98 CD into your CD-ROM drive. If your CD-
ROM drive is drive D, the path in the dialog box should
be D:\WIN98. Click "OK" to copy the required files.
7. The Add New Hardware Wizard window appears stating
that Windows has finished installing the software that
your new hardware device requires.
8. Click “Finish.”
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
4
9. The Systems Settings Change window states: “To finish
setting up your new hardware, you must restart your
computer. Do you want to restart your computer now?”
Remove the CD and click “Yes” to reboot the computer.
10. When the computer restarts, double-click the My
Computer icon on your desktop.
11. In the My Computer window, double-click the Control
Panel icon.
12. In the Control Panel window, double-click the Network
icon.
13. Select the PC4800 DS Wireless PCMCIA LAN
Adapter. Click the Properties button.
14. On the PC4800 DS Wireless PCMCIA LAN Adapter
Properties window, click the Advanced tab.
15. In the Advanced window, select Client Name. Type
your computer’s unique client name in the Value dialog
box.
16. Select SSID. Type your Access Point’s SSID in the
Value dialog box. Click OK.
17. In the Network window, click OK.
The driver installation is complete.
Installing in Windows 95
1. Remove all PC Cards from your computer and turn it
on.
2. Hold the Aironet 4800B Series PC Card Wireless LAN
Adapter with the label facing up. Insert the card into the
PC card slot and apply just enough pressure to make
sure it is fully seated.
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
5
Note: The PC Card slot will be on the left or right side
of the computer, depending on the model.
Caution: Do not force the PC Card into the slot or you
may bend the pins inside the slot.
Windows 95 automatically detects the Aironet 4800B
Series PC Card Wireless LAN Adapter, briefly opens a
New Hardware Found window, and starts collecting
information for a driver information database.
When Windows 95 is ready to configure the new
hardware, it opens the Update Device Driver Wizard
dialog box. The dialog box states that Windows will
complete the installation of the Aironet-PC4800.
3. Insert the Aironet 4800 Series for Windows 95 and
Windows NT CD and click Next.
Note: If your computer doesn’t have a CD-ROM drive,
go to the Aironet website (www.aironet.com) and
download the drivers for your computer’s operating
system. Copy the drivers to a 3.5” floppy disk and use
the floppy disk in place of the CD.
4. The Update Device Driver Wizard displays the
following message: “Windows was unable to locate a
driver for this device.” Click the Other Locations button.
5. The Select Other Location window appears. Click the
Browse button.
6. Select your CD-ROM drive and click OK. At the Select
Other Location window, click OK.
7. The Update Device Driver Wizard window tells you that
it found the driver. Click Finish.
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
6
8. When prompted with “Please insert the disk labeled
‘Windows 95 CD-ROM’, and then click OK”, just click
OK and do one of the following:
•If the Windows 95 files are installed on your
computer, the Windows 95 files will be located in
the folder C:\Windows\Options\Cabs. Type
C:\Windows\Options\Cabs in the “Copy files
from:” dialog box. Click "OK" to copy the required
files.
•If Windows 95 prompts for the Windows CD, insert
the Windows 95 CD into your CD-ROM drive. If
your CD-ROM drive is drive D, the path in the
dialog box should be D:\WIN95. Click "OK" to
copy the required files.
9. The Systems Settings Change window states: “To finish
setting up your new hardware, you must restart your
computer. Do you want to restart your computer now?”
Remove the CD and click “Yes” to reboot the computer.
10. When the computer restarts, double-click the My
Computer icon on your desktop.
11. In the My Computer window, double-click the Control
Panel icon.
12. In the Control Panel window, double-click the Network
icon.
13. Select the PC4800 DS Wireless PCMCIA LAN
Adapter. Click the Properties button.
14. On the PC4800 DS Wireless PCMCIA LAN Adapter
Properties window, click the Advanced tab.
15. In the Advanced window, select Client Name. Type
your computer’s unique client name in the Value dialog
box.
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
7
16. Select SSID. Type your Access Point’s SSID in the
Value dialog box. Click OK.
17. In the Network window, click OK.
The driver installation is complete.
Installing in Windows NT 4.0
1. Remove all PC Cards from your computer and turn it
on.
2. Hold the Aironet 4800B Series PC Card Wireless LAN
Adapter with the label facing up. Insert the card into the
PC card slot and apply just enough pressure to make
sure it is fully seated.
Note: The PC Card slot will be on the left or right side
of the computer, depending on the model.
Caution: Do not force the PC Card into the slot or you
may bend the pins inside the slot.
3. Insert the Aironet 4800 Series for Windows 95 & NT
4.0 CD into your CD-ROM drive.
Note: If your computer doesn’t have a CD-ROM drive,
go to the Aironet website (www.aironet.com) and
download the drivers for your computer’s operating
system. Copy the drivers to a 3.5” floppy disk and use
the floppy disk in place of the CD.
4. Right-click on the Network Neighborhood icon on your
desktop and select Properties. (If your desktop doesn’t
have a Network Neighborhood icon, open the Control
Panel, right-click the Network icon there, and select
Properties.)
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
8
5. Click the Adapters tab.
6. Click “Have Disk” at the Select Network Adapter
window.
7. Enter D:\ in the Copy files from box. (D:\ is the drive
letter of your CD-ROM drive. Your drive letter may be
different from this example.) Click OK.
8. In the Select OEM Option box, select the “Aironet
PCI4800B PC Wireless LAN Adapter” option. Click
OK.
9. The Aironet Wireless Communications, Inc. Adapter
Setup window appears. Click on Client Name in the left
window and enter your client name in the box in the
right window.
10. Click on the SSID in the left window and enter the SSID
in the box in the right window. Click OK.
11. Click Close.
12. When asked to shutdown and restart your computer,
remove the CD-ROM disk and click Yes.
The driver installation is complete.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
