Airwell RWV05 Bedienungsanleitung

Wired Controller

Operation & Installation Manual

• Please read this operation manual before using the air conditioner.

• Please keep this manual carefully and safely.

CONTENT

Parts and Functions............................................................ 1

Operation............................................................................ 9

Wired Controller Wiring Instruction................................... 47

RWV05

Interface Display

Parts and Functions

ON/OFF

Adjusting key for temperature, clock, timer, sleeping

adjustment, temp. compensation and energy saving;

Inquiring key for detail parameter and malfunction inquiry;

Switching key for function switch.

The adjusting accuracy of temperature is 0.5°C (1°F). If energy

saving mode is not set, the adjusting range is from 16°C

(60°F) to 30°C (86°F). If energy saving mode is set, the lowest

temperature limit of cooling/dry and the highest temperature

limit of heating are decided by the setting of the chip, the

default cooling/dry temperature is 23°C (74°F), and the default

heating temperature is 26°C (78°F).

Note:

• If the dip switch Sw2 is “on”, it displays the ambient temp., as

well as when powered off. From power off to power on, mode

switching and set temp. adjustment, it ashes to display SET

icon and statically displays the set temp.. And then statically

displays the ambient temp. and ROOM icon after 3 seconds.

In energy saving mode and temp. compensation mode, the

adjusting step is 1°C (1°F) a time.

Key

Parts and Functions

• If using Fresh Air unit, set temp. cannot be adjusted. If there

is no Central/Lock set, the temp. will be xed at 18°C (64°F)

in cooling and 22°C (72°F) in heating. The Up/Down key will

not display in normal state, but will display and valid in timer

setting, function selection, unit shift in malfunction inquiry,

parameter shift in parameter check, unit No. setting, sleeping

time adjustment, etc.

24-hour, press once to minus one minute. Keep pressing,

minus 2 minutes in 1 second’s pressing, then 10 minutes

in 5 seconds. The time will keep decreasing at the pace of

10 minutes a time in 10 seconds. Vice-versa. Press to

conrm or it will turn back to the previous state automatically in

10s.

Parts and Functions

Press this key to execute mode switch. For detailed

information, please refer to mode setting.

Note: If using Fresh Air unit, default 3 modes will circulate from

cooling→heating→fan→cooling.

Pressing this key, fan speed will be changed in sequence as

follows: (Low) → (Medium)

→ (High)→

(Auto) → (Low)

Note: Auto fan will be changed in sequence as follows:

→ →

→

Pressing this key, fan speed will be changed in sequence as

follows (Only valid for parts of models):

(Breeze) → (Low) →

(Medium) →

(High) → (Super) →

(Auto) → (Breeze)

Auto fan circulation:

(Breeze) → (Low) →

(Medium) →

(High) → (Super)

There is no auto fan in fan mode; The fan icon will ash when

adjusting the fan speed. It will statically display after the

adjustment.

Parts and Functions

Timer ON, Timer OFF, Timer ON/OFF.

Press this key to enter function circulation. If it is the four-

way cassette model, press Set key for 5s to enter function

circulation.

1.Press to select the functions in sequence as follows:

(Only when Left/Right swing is valid) → (Only when Up/

Down swing is valid) → → (ventilation function) →

(reserved function) → (When it’s time for lter cleaning,

this icon will involve in circulation) → (the second 8 of

88.8 in the temp. display area displaying A,only valid for part

of models)→ (the second 8 of 88.8 in the temp. display

area displaying B,only valid for part of models)→ (motion

sensing,only valid for part of models) →10°C heating function

(this function only works in the heating mode, only valid for

part of models) → health airow up (Only valid for part of

models) → health airow down (Only valid for part of models)

Parts and Functions

Note: If using Fresh Air unit, fan will be in auto fan and cannot

be adjusted. If press FAN key, fan icon and FFFF on the

top-right corner will ash, prompting fan speed cannot be

adjusted, and will statically display after 3s. Fresh Air unit fan

speed will be controlled automatically by indoor unit and wired

controller will always display auto fan.

2.Press to select the functions in sequence as follows:

health airow down (Only valid for part of models) → health

airow up (Only valid for part of models) →10°C heating

function (this function only works in the heating mode, only

valid for part of models) → (motion sensing,only valid

for part of models) → (the second 8 of 88.8 in the temp.

display area displaying B,only valid for part of models) →

(the second 8 of 88.8 in the temp. display area displaying

A,only valid for part of models) → (When it’s time for lter

cleaning, this icon will involve in circulation) → (reserved

function) → (ventilation function) → → (Only when

Up/Down swing is valid) → (Only when Left/Right swing is

valid)

3. Press to conrm function selected. If there is function

selected, press can cancel this function.

Note: The Left/Right swing is valid only after the dip switch

is set, the lter icon is shown only after the lter requires

cleaning.

Parts and Functions

Icon

Clock; Parameter setting/inquiry; Malfunction

display; Mode setting.

Timer ON/OFF: Sleeping; Parameter setting/

inquiry; Malfunction display.

ROOM/SET temp. and humidity display, each

step is 0.5°C (1°F) . For example, if the temp.

is 25°C (77°F), it will display 25.0°C (77°F).

Humidity display function is reserved.

Energy Saving, This icon will be displayed

only when energy saving function is set.

Filter Cleaning.

Child Lock. This icon will be displayed only

when child lock function is set.

/ Lock/ Central

Motion Sensing (Only valid for part of

models).

Left/Right Swing. This icon is displayed in

swing mode; no display without swing mode.

Up/Down Swing. This icon is displayed in

swing mode; no display without swing mode.

Parts and Functions

Sleeping. This icon is displayed when setting the

sleeping, and left time of sleeping is displayed by

Heat Reclaim Ventilation, This icon is displayed when

setting the heat reclaim ventilation.

Electrical Heating. This icon will display when electrical

heating is set on DC wired controller.

Intelligent Mode.

Cooling Mode. Heating Mode.

Fan Mode. Dry Mode.

Breeze Fan Speed (Only

valid for part of models)

Low Fan Speed.

Medium Fan Speed.

High Fan Speed.

Super Fan Speed (Only

valid for part of models)

If the fan speed is set in auto fan, it will change in the

following sequence: Breeze(Only valid for part of models)

→Low→Medium→High→Super (Only valid for part of

models), AUTO icon will display simultaneously.

Dip Switch Interpretation (for AC)

Operation

DIP

switch

On/Off

station Function Default

setting

Sw1 On Slave wired controller Off

Off Master wired controller

Sw2 On Ambient temp. display on Off

Off Ambient temp. display off

Sw3

On Collect ambient temp. from PCB of

indoor Off

Off Collect ambient Temp. from wired

controller

Sw4 On Non-volatile memory invalid Off

Off Non-volatile memory valid

Sw5 On Old protocol Off

Off Selfadaption

Sw6 On reserved Off

Off reserved

Sw7 On Model with Up/Down and Left/Right

swing Off

Off Model with Up/Down swing

Sw8 On Fresh Air unit Off

Off General unit

Inhaltsverzeichnis

Andere Airwell Fernbedienung Handbücher

Airwell

Airwell RC08C Bedienungsanleitung

Airwell

Airwell RCW11 Montageanleitung

Airwell

Airwell RC19 Bedienungsanleitung

Airwell

Airwell RC08A Bedienungsanleitung

Airwell

Airwell RC5 Bedienungsanleitung

Airwell

Airwell RCW4 Bedienungsanleitung

Airwell

Airwell RC7 Bedienungsanleitung

Airwell

Airwell RC5 Bedienungsanleitung

Airwell

Airwell RC08A Bedienungsanleitung

Airwell

Airwell RC08C Bedienungsanleitung

Airwell

Airwell RC 08B Bedienungsanleitung

Airwell

Airwell RCW25 Bedienungsanleitung

Airwell

Airwell RC15-7ACEL1801 Bedienungsanleitung

Airwell

Airwell RCV03 Bedienungsanleitung

Airwell

Airwell RC4 Bedienungsanleitung

Airwell

Airwell RC18 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung