Aiwa ALP40P Bedienungsanleitung

CAUTION:

Usage of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified

service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the

device on a shelf, leave 5 cm (2”) free space around the whole device.

4. Install in accordance with the supplied user manual.

near the plugs and the cable’ s exit point . Do not place heavy items on the

power adapt or, wh ich may damage it. Keep the ent ire device out of children’ s

reach! When playing with the power cable, they can seriously injure

themselves.

6. Unplug this device during lightning storms or when unused for a long

period.

7. Keep the device away from heat sources such as radiators, heaters,

stoves, candles and other heat-generating products or naked flame.

8. Avoid using the device near strong magnetic fields.

9. Electrostatic discharge can disturb normal usage of this device. If so,

simply reset and restart the device following the instruction manual. During

file transmission, please handle with care and operate in a static-free

environment.

10. Warning! Never insert an object into the product through the vents or

openings. High voltage flows through the product and inserting an object can

cause electric shock and/or short circuit internal parts. For the same reason,

do not spill water or liquid on the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens

or near swimming pools.

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and

checked several times before leaving the factory, it is still possible that

problems may occur, as with all electrical appliances. If you notice smoke, an

excessive build-up of heat or any other unexpected phenomena, you should

disconnect the plug from the main power socket immediately.

14. This device must operate on a power source as specified on the

specification label. If you are not sure of the type of power supply used in

your home, consult your dealer or local power company.

15. The socket outlet must be installed near the equipment and must be

easily accessible.

16. Do not overload ac outlets or extension cords. Overloading can

cause fire or electric shock.

17. Devices with class 1 construction should be connect ed to a main

socket outlet with a protective earthed connection.

18. Devices with class 2 construction do not require a earthed

connection.

19.

20.

Keep away from rodents. Rodents enjoy biting on power cords.

Always hold the plug when pulling it out of the main supply socket.

Do not pull the power cord. This can cause a short circuit.

21. Avoid placing the device on any surfaces that may be subject to

vibrations or shocks.

22. To clean the device, use a soft dry cloth. Do not use solvents or petrol

based fluids. To remove severe stains, you may use a damp cloth with dilute

detergent.

23. Damage or lost data caused by malfunction, misuse, modification of

the device or battery replacement will not be covered under warranty.

24. Do not interrupt the connection when the device is formatting or

transferring files. Otherwise, data may be corrupted or lost.

25. If the unit has USB playback function, the USB memory stick should be

plugged into the unit directly. Don’t use a USB extension cable because it

can cause interference resulting in failing of data.

26. The apparatus shall not be exposed to dripping or splashing and make

sure that no objects filled with liquids, such as vases, are placed on or near

the apparatus.

27. To completely disconnect the power input, the mains plug of the

apparatus shall be disconnected from the mains, as the disconnect device is

the mains plug of apparatus.

28. Battery shall not be exposed to excessive heat such as sunshine, fire

or the like.

29. Attention should be drawn to the environmental aspects of battery

disposal.

30.The unit should only be used in moderate climates. Avoid using in

extremely cold or extremely warm environments.

31. The rating label has been marked on the bottom or back panel of the

apparatus.

32. This device is not intended for use by people (including children) with

physical, sensory or mental disabilities, or a lack of experience and

knowledge, unless they’re under supervision or have received instructions

about the correct use of the device by the person who is responsible for their

safety.

33. This product is intended for indoor, household only and not for

commercial or industrial use.

34. Make sure the unit is adjusted to a stable position. Damage caused by

using this product in an unstable position or by failure to follow any other

warning or precaution contained within this user manual will not be covered

by warranty.

35. Never remove the casing of this apparatus.

36. Never place this apparatus on other electrical equipment.

37. Do not use or store this product in a place where it is subject to direct

sunlight, heat, excessive dust or vibration.

38. Do not allow children access to plastic bags.

39. Only use attachments/accessories specified by the manufacturer.

40. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as the power

supply cord or the plug, when liquid has been spilled or objects have fallen

into the apparatus, when the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

41. Do not use a damaged power cord or plug or a loose outlet. Doing so

may result in fire or electric shock.

42. Prolonged exposure to loud sounds from personal music players may

lead to temporary or permanent hearing loss.

INSTALLATION

•Unpack all parts and remove protective material.

•Do not connect the unit to the mains before checking the mains

voltage and before all other connections have been made.

Packing Included :

Main unit

Remote

(2 X AAA batteries

included)

AC Power Adapter Lens Cover User Manual

FLIP VOL

–

VOL

SOURCE

EX IT

1 2 3

4 5 6

7 8 9

GOTO 0 ZOOM

1 2 3

4 5 6

7 8 9

SOURCE

GOTO ZOOM

FLIP VOL – VOL+

EXIT

3.5 mm to RCA AV cable

Remove & Close The Lens Cover

Remove the lens cover before using Close the lens cover when unit not in use

LENS COVER

REMOV

ELENS COVER

Placing Your Projector

Your projector can be installed in four different configurations ( see picture

below):

Front Table:

Select this location with the projector placed

near the floor in front of the screen. This is the

most common way to position the projector

for quick setup and portability.

Front Ceiling:

Select this location with the projector

suspended upside-down from the ceiling in

front of the screen.

NOTE: A projector mount is required to install

the projector in a ceiling.

Rear Table:

Select this location with the projector placed

near the floor behind the screen.

NOTE: A special rear projection screen

is required.

Rear Ceiling:

Select this location with the projector

suspended upside-down from the ceiling

behind the screen.

NOTE:

A projector mount is required to install the

projector in a ceiling.

A special rear projection screen is required.

FRONT TABLE

FRONT CEILING

REAR TABLE

REAR

CEILING

Square /Rectangle

It is recommended to move the projector as close to

center of screen.

Distance Between The Projector And Screen

Measure the distance between the projector and where you want to

position the screen. This is the projection distance.

Placing Your Projector On Ceiling

When installing the projector in the ceiling, please purchase a projector mount

recommended by an installation professional and follow the instructions that

come with the mount.

Before installing the projector in the ceiling, please check to make sure the

ceiling structure can support the weight of the projector and the mount. If in

doubt, please ask the advice from an installation professorial.

NOTE: Projector mount and screw(s) not included

CEILING HANGER

FIXED HANGER HOLE

THE CENTER OF LENS

SCREEN

Note: This does not apply for ceiling mounted projectors.To adjust the vertical angle

of the image, adjust the Height Adjustment Peg on the bottom of the projector as

shown. Turn this Peg clockwise or anticlockwise to adjust the vertical angle.

Adjust The Focus And Keystone

Follow below picture to adjust the focus and trapezoidal screen.

Adjust the focus by turning the knob while

observing the image pixels near the center of the

screen. Optimal focus is obtained when the

pixels are clearly visible. Depending on the

projected screen size, the focus near the screen

edges may be less sharp than the screen center.

Keystone image is created when the projector

beam is projected to the screen in an angle.

Keystone correction will restore the distorted

image to a rectangular or square shape.

SCREEN

PROJECTOR

Height Adjustment Peg

FOCUS ADJ. KNOB

Then sharpen the image

by rotating focus knob.

TRAPEZOIDAL ADJ. KNOB

Vertical Angle

Controls Of Remote

1 2 3

4 5 6

7 8 9

SOURCE

GOTO ZOOM

FLIP VOL – VOL +

EXIT

Power

Press to power ON.

Press and hold to power OFF.

Previous / Next

Press to skip between chapters or tracks.

Stop

Press to stop playback.

Flip

Press t display image 180°.

Play/Pause

Press to play or pause an individual

chapter or track.

Arrows/OK

Press to navigate and c rm selections in

Settings and other menus.

Press to access projector Settings.

Go To/Number Keypad

Press to enter spec ter or track

numbers. Use Play button to begin

playing.

Mute

Press to mute volume.

Back / Fwd

Press to search through an individual

chapter or track.

VOL+ / VOL−

Press to adjust audio level.

Source

Press to select media source

(AV, PC, HDMI, MEDIA).

Exit

Press to exit menus.

Zoom

Press to zoom display image in or out.

Remove the battery compartment cover on the back of your remote by

carefully sliding to open. The battery cover can then be lifted away. Fit the

correct batteries (2 X AAA batteries included), referring to the polarity

markings. Finally, replace the cover.

NOTES:

•Batteries shall not be exposed to excessive heat such as sunshine, fire

•Be sure that the batteries are installed with correct polarity.

•Do not mix old and new batteries.

•Only same or equivalent type batteries as recommended are to be used.

•Do not dispose of batteries in fire, battery may explode or leak. Do not try

to recharge a battery

AAA / UM4

BATTERY DOOR

•Do not mix alkaline, standard (carbon-zinc), or rechargeable (Nickel-cadmium,

Nickel-metal hydride etc) batteries.

VGA

Controls OfProjector

6 7

9 10

12 MICROSD 13

CAU TION

Inhaltsverzeichnis

Andere Aiwa Projektor Handbücher

Aiwa

Aiwa ALP580 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung