Akerstroms Tx800 Triton Bedienungsanleitung
User Manual
Tx800 Triton
User Manual Tx800
2 E-EQ-TX800OGWW-B
Notice:
LXE Inc. reserves the right to make improvements or changes in the products described in this manual at any time without
notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, LXE assumes no
liability resulting from any errors or omissions in this document, or from the use of the information contained herein. Further,
LXE Incorporated, reserves the right to revise this publication and to make changes to it from time to time without any
obligation to notify any person or organization of such revision or changes.
Copyright Notice:
This manual is copyrighted. All rights are reserved. This document may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-readable form without prior consent, in writing, from
LXE Inc.
Copyright © 2009 by LXE Inc. An EMS Technologies Company.
125 Technology Parkway, Norcross, GA 30092 U.S.A. (770) 447-4224
Trademarks:
LXE® and Spire® are registered trademarks of LXE Inc. RFTerm® is a registered trademark of EMS Technologies,
Norcross, GA.
Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
RAM® and RAM Mount™ are both trademarks of National Products Inc., 1205 S. Orr Street, Seattle, WA 98108.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other
countries.
WLinq is a trademark of FreeFloat, AB.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LXE, Inc. is under
license.
All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
When this manual is in PDF format: “Acrobat® Reader® Copyright © 2009 Adobe Systems Incorporated. All rights reserved.
Adobe®, the Adobe logo, Acrobat®, and the Acrobat logo are registered trademarks of Adobe Systems Incorporated.” applies.
Revision Notice
Revision Section Explanation
B Rear Cover Revised contact information
B 4.4.5 Bar Code Readers Split into two sections, serial and Bluetooth.
C Notices and Copyrights Revised for 2009.
Revision A, Initial Release, October 2008
Revision B, January 2009
Revision C, March 2009
E-EQ-TX800OGWW-D-ARC 3
Table of Contents
1ABOUT THIS MANUAL 7
1.1 Who should read this manual............................................................................7
1.2 Notices.................................................................................................................7
1.3 How to use this manual......................................................................................8
1.3.1 Prerequisites.....................................................................................................................8
1.3.2 Symbols used...................................................................................................................8
2SAFETY 9
2.1 2.1 Personal safety ............................................................................................. 9
2.2 Product safety..................................................................................................... 9
2.2.1 Supplying power..............................................................................................................9
2.2.2 Humidity, moisture, cold and heat...................................................................................9
2.2.3 Interference......................................................................................................................9
2.2.4 Vibrations ........................................................................................................................9
3PRODUCT DESCRIPTION 11
3.1 Design and functionality ..................................................................................11
3.2 Typical usage....................................................................................................11
3.3 Connections and adapters............................................................................... 12
3.3.1 Interfaces and connections.............................................................................................12
3.3.2 Under the service-lid......................................................................................................13
3.4 Tx800 series ......................................................................................................13
3.4.1 Peripherals and accessories............................................................................................14
4INSTALLATION 15
4.1 Mounting the unit.............................................................................................. 15
4.1.1 Mounting brackets.........................................................................................................16
4.2 Electrical installation........................................................................................18
4.2.1 Connecting to power source ..........................................................................................18
4.2.2 DC to DC Converter......................................................................................................21
4.2.3 Blackout screen function ...............................................................................................22
4.3 Settings..............................................................................................................23
4.4 Installing peripherals........................................................................................24
Table of Contents User Manual Tx800
4 E-EQ-TX800OGWW-D-ARC
4.4.1 Ports for connecting peripherals....................................................................................24
4.4.2 Supplying power to peripherals.....................................................................................25
4.4.3 Keyboard and mouse .....................................................................................................25
4.4.4 Printers...........................................................................................................................25
4.4.5 Serial Barcode readers...................................................................................................26
4.4.6 Bluetooth bar code readers ............................................................................................26
4.4.7 External monitor............................................................................................................26
4.4.8 Other external accessories .............................................................................................26
4.4.9 Audio Out ......................................................................................................................27
4.4.10 Mic In...........................................................................................................................27
4.4.11 Antenna........................................................................................................................27
4.5 Mounting the port lid ........................................................................................ 28
5USING THE TX800 29
5.1 Operating........................................................................................................... 29
5.1.1 Starting the computer.....................................................................................................29
5.1.2 Turning off the computer...............................................................................................29
5.2 Touchscreen...................................................................................................... 29
5.2.1 Using the stylus to select screen objects........................................................................30
5.2.2 Calibrating the touchscreen ...........................................................................................30
5.2.3 Adjusting brightness......................................................................................................30
5.2.4 LED indications.............................................................................................................31
6MAINTENANCE 33
6.1 Cleaning the screen..........................................................................................33
6.2 Checking connections......................................................................................33
6.3 Service............................................................................................................... 33
7TROUBLESHOOTING 35
7.1 Computer problems.......................................................................................... 35
7.1.1 The computer will not start............................................................................................35
7.1.2 The screen is blank ........................................................................................................35
7.2 Problems with peripherals...............................................................................36
7.2.1 Keyboard/Mouse............................................................................................................36
7.2.2 Touchscreen accuracy....................................................................................................36
7.2.3 Communication..............................................................................................................36
APPENDIX 37
I Technical Specifications...................................................................................... 37
User Manual Tx800 Table of Contents
E-EQ-TX800OGWW-D-ARC 5
II Port Signals..........................................................................................................39
III Technical Recommendations ............................................................................ 46
IV Disclaimer ...........................................................................................................47
V Tx800 Software.................................................................................................. 48
VI Certification......................................................................................................... 49
VII Warranty, Support and Service ........................................................................ 52
VIII Environmental Care Information..................................................................... 53
IX Batteries............................................................................................................54
X Français Avertissement et emarque................................................................ 55
Illustrations
Figure 1 Overview connections and interfaces.................................................................................................12
Figure 2 Overview: connections and interfaces under the service-lid ..............................................................13
Figure 3 Brackets (are available in 2 dimensions, in 3 lengths, see below)......................................................16
Figure 4 Locations of holes for 1.5” ball..........................................................................................................17
Figure 5 Location of holes for 2.25” ball..........................................................................................................17
Figure 6 Power supply connector......................................................................................................................18
Figure 7 Wiring Diagram, Without Blackout Screen Box................................................................................21
Figure 8 Wiring Diagram, With Blackout Screen Box.....................................................................................22
Figure 9 Ports....................................................................................................................................................24
Figure 10 Strain relieving brackets for USB and PS/2 connectors ...................................................................25
Figure 11 Applying the openable cable protection tube ...................................................................................28
Figure 12 Mounting the port lid........................................................................................................................28
Figure 13 On/Off button ...................................................................................................................................29
Figure 14 Screen Brightness.............................................................................................................................30
Figure 15 LED Indicators .................................................................................................................................31
Table of Contents User Manual Tx800
6 E-EQ-TX800OGWW-D-ARC
E-EQ-TX800OGWW-D-ARC 7
1 About this manual
This manual covers the following topics related to installation, start-up, operation and maintenance of
Tx800.
•Safety considerations
•General product information
•Product installation procedures
•Product use and maintenance
•Troubleshooting
The appendices provide this reference information: technical specifications, port signals, environmental
considerations, fulfillment of EU and US compliance regulations, warranty, support, service and
Åkerströms Trux AB addresses and phone numbers.
1.1 Who should read this manual
Use this manual if you are responsible for installing, setting in operation, maintaining or repairing Trux
Solutions. It provides information you need for mechanical and electrical installation of Åkerströms Trux
AB Tx800 and configuration of basic functions. You should:
•Be familiar with mechanical, electrical and computer installations.
•Have experience using computers and knowledge of the operating system that will run on the
Tx800.
The manual does not describe how to install and use the operating system or applications.
1.2 Notices
This manual describes the product’s basic design and main procedures for installing, operating, and
maintaining the product. There might be deviations between information in this manual and the appearance
and functions in the delivered product, because of differences in hardware and software versions.
When product updates that affect function and security, are available at www.lxe.com or from LXE’s
support department.
About this manual User Manual Tx800
8 E-EQ-TX800OGWW-D-ARC
1.3 How to use this manual
To… Read Chapter…
Prepare for electrical installation 2 Safety
Prepare for product installation 3 Product description
Install Åkerströms Tx800 4 Product installation
Operate Tx800 5 Using the product
Maintain proper operation 6 Maintenance
Solve problems 7 Troubleshooting
1.3.1 Prerequisites
To perform some tasks listed above, you’ll need:
•Åkerströms Trux AB or other manufacturers’ documentation related to options and
peripherals.
•Manufacturers’ product documentation for the:
•Operating system and other applications
•Global positioning system (GPS)
•Global system for mobile communication (GSM)
•General packet radio service (GPRS)
1.3.2 Symbols used
This manual contains these symbols, abbreviations, and terms:
Symbol Heading Description
Warning Warns about risk of damage to people or property. Always follow the
instructions provided in conjunction with this symbol.
Note Calls your attention to problems that may arise if a measure is not taken
or is taken incorrectly.
E-EQ-TX800OGWW-D-ARC 9
2 Safety
2.1 2.1 Personal safety
Keep this in mind:
Always exercise caution when working with electricity
2.2 Product safety
2.2.1 Supplying power
Tx800 have to be supplied with an external fuse before connecting to recommended voltage (see 4.2.1).
Connect only the recommended voltage. Any other voltage may damage the product or make its operation
fail.
The external electrical system should be designed to prevent voltage peaks.
A DC/DC transformer is predominantly used to electrically isolate the Tx800 from the vehicle chassis (see
4.2.1).
2.2.2 Humidity, moisture, cold and heat
Make sure the operating environment is within the standards described in Appendix I, Technical specs.
Don’t turn the Tx800 on, unless environmental conditions are met.
2.2.3 Interference
Ensure that:
•Any nearby electrical cabling (mains supply) is run so that interference does not occur.
•The immediate environment meets requirements stated in the specified standards (see
Appendix IV) regarding interference
2.2.4 Vibrations
Tx800 should be mounted in a way that vibrations, transmitted to it, does not exceed the limits it is
designed for (see Appendix I, Specifications).
Safety User Manual Tx800
10 E-EQ-TX800OGWW-D-ARC
Inhaltsverzeichnis
