Akia Screens Fixed Frame Screen Series Bedienungsanleitung

JA01072022 www.akiascreens.com U-00239 1

Fixed Frame Screen Series

Matte White Fixed Frame Screen

FeaturingCineWhite®UHD-B

USER’S GUIDE – M Type

V 2

__________________________________________________________________________________________

Congratulations on your new Fixed Frame Screen purchase! The screen material included is our ISF certified

CineWhite® UHD-B, which is a reference quality front projection material with black backing that is certified by

the world-renowned Imaging Science Foundation. ISF Certified means the CineWhite UHD-B material produces

accurate colors in a light-controlled dark room environment. This is an industry standard for high-fidelity video

display systems. Watch your content as the director intended!

In order for the CineWhite® UHD-B to maintain its projection qualities and optimum performance please refer

to the list below for proper maintenance and cleaning.

•Use a dry microfiber cloth to remove dust from the screen’s surface.

•When cleaning, use a damp microfiber cloth with warm water to remove anymarks.

•Never rub or apply pressure when cleaning the surface.

•Never attempt to use any solutions, chemicals, or abrasive cleaners on the screen surface.

•To avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any other

sharp or abrasive objects.

JA01072022 www.akiascreens.com U-00239 2

Frame Parts List

A. Vertical Frame x 2pcs

B. ½ Horizontal Frame x2 pcs

C. ½ Horizontal Frame x 2 pcs

Hardware Parts List

a. M4*4

b. D5*4

c. M4*4

d. D5*4

Item

Parts List

100”

110”

120”

135”

150”

Center Joints- M4 (bottom position)

Center Joints-D5 (top position)

Elbow Joints M4 (bottom position)

Elbow Joints D5 (top position)

M4x7 Screws

Spring

Pull Hook

Wall brackets

Wall Screws M5x50

Hollow Wall anchors

Center Support Bar

White gloves

Φ3 mm Long Iron (sides) rod /Short rod (top/bottom)

2/4

C+B

B+C

Red

Black

JA01072022 www.akiascreens.com U-00239 3

Frame Assembly

Step 1: Place the EPE sponge (foam) sheet on the ground of the area where the screen will be assembled.

Step 2: Position the pieces of the frame on the EPE sponge in the arrangement shown below.

Step 3: Insert center joint (a/b) connectors into one-half of the horizontal frame (B/C) and secure with the M4x7

screws (g) as shown in the illustration below.

Step 4: Connect the elbow joints (c/d) to the top and bottom sections of the vertical frame. Once inserted, connect

the vertical sections to the horizontal frame sections. Make sure all holes are in alignment and the frame pieces are

flush (no gaps). They should form perfect right angles.

Tip: The center joint (b) with the larger diameter holes should be on top.

Tip: The elbow joint (d)with the larger diameter holes should be on top.

JA01072022 www.akiascreens.com U-00239 4

Step 5. Secure the elbow joints by fastening them with M4x7 screws (g), 4 at each corner.

Screen Material

Step 6: Put on the white gloves (p) and carefully unroll the screen material on a clean surface from the roller to the

other side as shown below. The back side of the screen material should be placed upwards. Then place a bottom

grommet (r) on the screen material’s eyelet and snap in the top grommet (s) as shown below.

Repeat the process for all eyelets.

Step7: Carefully place the screen on top of the assembled frame as shown below.Make sure that the angular edges

of the frame are not allowed to come into direct contact with the screen material to avoid puncturing.

Front

JA01072022 www.akiascreens.com U-00239 5

Step 8: Insert the rods (r) through the sleeves according to their corresponding lengths on each edge of the

screen as shown below. The short rods (top/bottom) will overlap to secure a firm grasp in the middle areas

How to attach the springs

Step 9: Hook one end of the spring and secure inside the groove of the frame, use the spring hook (i)to attach

the spring to the hole located on the screen material’s outer edge in the following order.

Back Side

r. (Red tips)

Back Side

r. (Black tips)

Back Side

Back

Side

Go through the hole

from bottom to top

Spring must hook both

overlapping short rods.

JA01072022 www.akiascreens.com U-00239 6

First connect on four corners, steps 1-4. make sure all four corners are fixed before proceeding with next spring.

Continue to attach the remaining springs to the material in steps 5-12 in the follow order.

JA01072022 www.akiascreens.com U-00239 7

Step 10: Insert the Center Support Bar (o) into the upper top groove on the back of the frame with the bottom end

near the approximate center point of the frame and rotate it in at an angle so that both ends of the bar are in

alignment with the groove.

Diagonal Models 150” and below use 1 x Center Support Bar

Installation

Step 11: Measure the overall length and height of the frame and drill holes for the top brackets. Line up the wall

brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver. If not

installing into a structural wood stud, use a hollow wall anchor then screw in the M5x50 wood screws with a

screwdriver. Make sure the brackets are leveled.

Diagonal Sizes of 150” and below use 4 x wall brackets

Model/Size

X = Wall bracket distance

X1 = Bracket hole distance

Y = Top/Bottom Wall Bracket Height

100”

1170mm (46.06”)

30mm (1.18”)

1280mm (50.39”)

110”

1280mm (50.39”)

30mm (1.18”)

1410mm (55.51”)

120”

1390mm (54.72”)

30mm (1.18”)

1530mm (60.24”)

135”

1550mm (61.02”)

30mm (1.18”)

1720mm (67.72”)

150”

1720mm (67.72”)

30mm (1.18”)

1900mm (74.80”)

Don’t tighten the screw to allow

the screen to move up/down.

JA01072022 www.akiascreens.com U-00239 8

Step 12: Begin by placing the frame on the bottom bracket (fig 1), move up and position onto the top wall

brackets (fig 2) then push down at the center of the top of the frame to secure.

For Technical Support or an Akia Screens contact in your area, visit

www.akiascreens.com

Inhaltsverzeichnis

Andere Akia Screens Projektionsfläche Handbücher

Akia Screens

Akia Screens Motorized Series Bedienungsanleitung

Akia Screens

Akia Screens EDGE FREE CLR 2 Series Bedienungsanleitung

Akia Screens

Akia Screens Fixed Frame Screen Series Bedienungsanleitung

Akia Screens

Akia Screens EDGE FREE Series Bedienungsanleitung

Akia Screens

Akia Screens EDGE FREE CineWhite UHD-B Series Bedienungsanleitung

Akia Screens

Akia Screens EDGE FREE CLR 3/4 Series Bedienungsanleitung

Akia Screens

Akia Screens EDGEFREE Fixed Frame Screen Bedienungsanleitung

Akia Screens

Akia Screens Manual Series Bedienungsanleitung

Akia Screens

Akia Screens EDGE FREE CLR 4 Bedienungsanleitung

Akia Screens

Akia Screens Folding Frame 120" Bedienungsanleitung

Akia Screens

Akia Screens EDGE FREE Series Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

Elite Screens

Elite Screens M85XWS1-SRM Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

Elite Screens

Elite Screens Starling 2 Series Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung