Alarmcom ADC-VDB780 Bedienungsanleitung
Alarm.com Wireless Video Doorbell (ADC-VDB780B) - Installation Guide
Use this guide to assist with the installation of your ADC-VDB780B Wireless Video Doorbell.
In the box
• ADC-VDB780B Wireless Video Doorbell
• ADC-VDB780B mounting plate
• 10º tilt wedge
• Battery pack
• Charging cable
• Mounting screws (2)
• Mounting anchors (2)
• Wedge screws (4)
• Quick start guide
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
1
Pre-installation checklist
Important: A service package that includes Video Analytics and the Doorbell Cameras add-on is required to enroll the
ADC-VDB780B.
• ADC-VDB780B and included accessories
• Drill/Screwdriver
• evel
• Pencil
• Wi-Fi connection to broadband (Cable, DS , or Fiber Optic) internet
• A computer, tablet, or smartphone with Wi-Fi
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
2
The Alarm.com Smart Chime (ADC-W115C) is required for installation.
Click here for instructions
Installation
Important: If you have not installed the Alarm.com Smart Chime yet, do that now. For installation instructions, see
Alarm.com Smart Chime (ADC-W115C-INT) - Installation Guide (International).
Power on the Wireless Video Doorbell
1. Remove the Wireless Video Doorbell (VDB780B) from the packaging.
2. Separate the battery pack from the VDB780B body.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
3
3. Activate the battery by plugging in the Micro USB charger to a wall outlet and connecting it to the battery.
4. Check the top of the battery pack for a blue protective film. If present, please remove the film and discard it.
5. Press the doorbell button on the front of the battery. If the button ED alternates between red and blue, the battery
pack must be recharged prior to completing the installation. For more information, see Charging the battery.
6. If the button ED isn’t alternating blue and red, reconnect the battery pack to the VDB780B body.
7. After the button ED stops flashing red, press and release the doorbell button and ensure the ED lights up red.
Connect the Wireless Video Doorbell to the Alarm.com Smart Chime
1. Verify the Wireless Video Doorbell (VDB780B) is less than 10 feet away from the Alarm.com Smart Chime
(W115C).
2. Verify that the W115C has been installed and associated with an account.
3. To enable WPS mode, press and hold the VDB780B doorbell button firmly for greater than 30 seconds. The ED
will begin flashing blue.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
4
4. Press and release the WPS button located on the side of the W115C to enable WPS mode. The WPS ED will
begin flashing rapidly.
5. If the pairing is successful, the W115C Devices ED will quickly blink 3 times, and the VDB780B ED will begin
blinking red and then turn solid green.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
5
Enroll the Wireless Video Doorbell to the Account
Once the ADC-VDB780B is connected to the ADC-W115C, it can be enrolled to a customer account using the Customer
app, Customer Website, or MobileTech app.
Method 1: Customer app
1. og into the Customer app.
2. Tap Video.
3. Tap .
4. Tap Add Video Device.
5. Tap ADC-VDB780B.
6. Follow the on-screen prompts for installing the video device.
Method 2: Customer Website
1. In an internet browser address bar, enter www.alarm.com/addcamera and log into the customer account.
Alternatively:
a. og into the Customer Website.
b. Click Video.
c. Click Settings.
d. Click Add Video Device.
2. Find the ADC-VDB780B in the list or enter its MAC address and enter a name for the video device. If the ADC-
VDB780B does not appear in the list, see Video device is not found during installation.
3. Click Install to begin installing the ADC-VDB780B.
4. Follow the on-screen prompts for installing the video device.
Method 3: MobileTech app
1. og into the MobileTech app.
2. Find the customer account.
3. Tap Equipment.
4. Tap Add Devices.
5. Tap Video.
6. Verify the ADC-VDB780B is connected to the network. For a guided network connection tutorial:
a. Using the Select Video Device for Guided Installation Tutorial dropdown menu, select the ADC-VDB780B.
b. Tap Open Installation Tutorial.
7. Find the ADC-VDB780B in the list or enter its MAC address. If the ADC-VDB780B does not appear in the list,
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
6
see Video device is not found during installation.
8. Tap Install to begin installing the ADC-VDB780B.
9. After the device is successfully installed, it appears under Recently Installed Video Devices.
10. Tap the name of the video device to configure its post-install settings:
◦ Configure Wi-Fi settings.
◦ Rename the camera.
◦ Request an image upload.
◦ Configure Video Analytics or other recording rules.
Note: These settings can only be changed in the MobileTech app until 24 hours after enrollment. Any future
changes will need to be made using the Customer Website.
Mount the Wireless Video Doorbell
Plan, Level, & Mark
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
7
1. Identify a location on the side of your doorframe to mount your Wireless Video Doorbell (VDB780B). We
recommend a position approximately 4 feet above the ground for an optimal field of view.
2. Place the mount at your desired location.
3. Use a level to ensure the mount is parallel to the ground.
4. Use a pencil to mark the two holes of the mount.
Tip: If you have someone to help you with the setup, use the Mobile App or Customer Website to start a live stream.
You can place the VDB780B over your planned mounting position to assess the field of view before you start drilling.
There are two common mounting areas that can lead the Wireless Video Doorbell to be misaligned. The included 10º tilt
wedge mount may be required to point the Wireless Video Doorbell properly.
Mounting on an elevated entryway:
If the installation location has stairs or a ramp leading to the entryway, a tilt wedge will likely be needed to help focus the
Wireless Video Doorbell on the visitors' approach path.
A doorbell mounted on an elevated entryway may wake up too often due to constant or uninteresting motion.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
8
Visitors may only be detected once they are directly in front of the entryway and clips will not contain their approach to
the door.
Install the 10º tilt wedge mount included in the doorbell’s packaging to focus the PIRs downward to reduce unwanted
wake-ups, and improve recorded clips.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 30 Aug 2023 11:32:17 GMT
9
Inhaltsverzeichnis
Andere Alarmcom Gegensprechanlage Handbücher
