Alcatel ONE TOUCH X060S Bedienungsanleitung

User Manual

Table of Contents

Safety and Use...............................................................................................................2

Installation Guide ..........................................................................................................4

Main Interface Overview.............................................................................................4

Entrance to Main Interface.........................................................................................5

Connect to Internet......................................................................................................6

SMS Services (Text Message).......................................................................................7

Contacts.........................................................................................................................8

Settings............................................................................................................................9

Warranty .......................................................................................................................12

FAQs...............................................................................................................................13

Installation Guide for Mac.........................................................................................14

Safety and Use

We recommend that you read this chapter carefully before using your

modem. The manufacturer disclaims any liability for damage, which

may result as a consequence of improper use or use contrary to the

instructions contained herein.

Traffic Safety

When driving, do not use your modem

When switched on, your modem emits electromagnetic waves that

can interfere with the vehicle’s electronic systems such as ABS

anti-lock brakes or airbags. To ensure that there is no problem; do

not place your modem on top of the dashboard or within an airbag

deployment area.

Check with your car dealer or the car manufacturer to make sure

that the dashboard is adequately shielded from modem RF energy.

Conditions of Use

1. Switch the modem off before boarding an aircraft.

2. Switch the modem off when you are in health care facilities, except

in designated areas. As with many other types of equipment now in

regular use, mobile telemodems can interfere with other electrical

or electronic devices, or equipment-using radio frequencies.

3. Switch the modem off when you are near gas or flammable liquids.

Strictly obey all signs and instructions posted in a fuel depot, petrol

station, chemical plant, or in any potentially explosive atmosphere.

4. When the modem is switched on, it should be kept at least 15 cm

from any medical device such as a pacemaker, a hearing aid or

insulin pump, etc.

5. Do not let children use the modem without supervision. Your

modem may contain small parts that could become detached

and create a choking hazard.

6. When replacing the cover, please note that your modem may

contain substances that could create an allergic reaction.

7. Always handle your modem with care and keep it in a clean and

dust-free place.

Do not open, dismantle or attempt to repair your modem yourself.

Do not drop, throw or bend your modem.

Do not paint it.

Collection Point:

This symbol on your modem means that these products must be

taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these items of

equipment

Collection bins at points of sale.

They will then be recycled, preventing substances being disposed

of in the environment, so that their components can be reused.

In European Union countries:

These collection points are accessible free of charge.

All products with this symbol must be brought to these collection points.

In non European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary

bins if your jurisdiction or your region has suitable recycling and

collection facilities; instead they are to be taken to collection points for

them to be recycled.

In the United States, please visit www.recyclewirelessphones.org for

more information on recycling wireless products.

Protection against theft

Your modem is identified by an IMEI (modem serial number) shown on

the packaging label and in the product’s dashboard. We recommend

that you note the number the first time you use your modem by

opening the dashboard “Settings” > “Diagnostics” to get it.

Disclaimer

There may be certain differences between the user manual description

and the modem’s operation, depending on the software release of

your modem or specific operator services.

Installation Guide

Installation procedures may vary based on the operating system

installed on your PC. The following instructions are based on the

Windows XP OS:

Turn on your PC and plug your modem into the USB interface slot to

begin software installation. Windows should automatically detect the

new device and will prompt you to begin installation.

After following the prompts of installation setup, upon completion, a

shortcut will be placed on your desktop for quick future access.

Note:

1. If installation “auto-run” does not begin, you will need to locate the

“autoRun.exe)” file in the driver path, and Double-Click on

AutoRun.exe to run the installation manually.

2. A Micro-SD card is an optional accessory

3. Please do not remove the USIM/SIM card and or the Micro-SD card

when your modem is in use.

Upon successful installation of the HSPA management program, the

program will launch automatically. You may also double-click the short

cut icon on the desktop to launch the program.

Main Interface Overview

Following table are listed Short Cut Icons in PC Suite Interface.

Interface Icons Provided Services

Home Home Page (Click on <Connect> icon from the

main window to connect/disconnect from the

Internet)

Contacts Display The Phones Book Interface

SMS Display The Text Message Interface

File Manager Open the File Folder of Micro SD Card

Settings Display the Settings manual

Following table are listed the Icons of status bar information

Connection Statistics Icon

Description

Network Signal Indicates the signal strength of the network

Network Status Indicates the network status. This will display the

operator name which the modem can find the

network. Or show the modem haven’t ready.< No

(U)SIM> or <NO Device>

Network Type Display in the status bar, to show you which

network you are using (GPRS / EDGE/ UMTS or

HSPA)

Roaming Roaming Icon “ ”, when the network is under

roaming.

New Message Display the SMS status including new SMS/SIM card

memory is full/Data Card memory is full.

Network Connecting Connecting Icon “ “display in the status bar,

when the network is connected into internet

network. .

Following table are listed the LED Indicates for each status.

LED Indicator Desctiption

Flashing Green & Red multicolour

circularly

Network Searching

Quickly Flashing Green & Red multicolour

circularly

Out of order

Green Light Slow Flashing Registering into HSPA or UMTS network

Constant Green Light Registered to HSPA or UMTS network

Red Light Slow Flashing Registering into GPRS or EDGE network

Constant Red Light Registered to GPRS or EDGE network

Entrance to Main Interface

The application runs automatically and the main window will pop up

when your modem will be connected. You can also access and run the

application from the <Start> menu.

If the PIN code is enabled, please enter the correct PIN code in the

entry field, and click on <OK>. You may try only 3 times to enter the

correct PIN code; after three incorrect attempts, the USIM or SIM card

will be blocked.

A PUK dialog box will then be displayed asking you to enter the right

PUK code, PIN Code and Confirmed PIN. Click on <OK> if you fail to

input the correct PUK code after 10 attempts, you will need to contact

your service provider.

If the PUK and PIN code is correct, the application will be launched and

all features are enabled

Connect to Internet

1. Connecting with the default logon profile

If you want to connect to the Internet without setting any user-defined

or predefined profiles, press icon of “connect”. The default connection

profile will be used in accordance with your USIM/SIM card.

Connecting

yClick on <Connect> from the home page;

yWait several seconds until the connection is established;

yOnce you are connected, Icon of <Connect> will change into

<Disconnect>.

Disconnecting

Click on Icon of <Disconnect> from the home page to disconnect from

the Internet.

2. Connecting with a user-defined logon profile

Click on settle icon and select the <Connection Profile…> menu to

open the profile setting window.

Adding a new connection profile

Click on <Settings> and select the connect Profile to add a new

connection

yIf <ADD> is selected, the new connection profile windows will pop

up.

yPlease enter the info of requested;

yAccount (Connection Naming), Number, APN, User Name,

password and final choice which Auth Type you are using by

manually;

yClick <OK>

yPlease select you preferred network and click on <Activate> to

default your connection setting.

Note：Users may obtain Number, APN Code, User Name, Password and

Authtypeinformationfromnetworksprovider.

SMS Services (Text Message)

Click SMS icon from the main interface of the PC suite to access the SMS

service.

1. Displaying the received SMS

When a new message is received, a message box appears in the status

bar. .

yClick the content of the chosen message. You may also display

the content on the message window.

Note: Received SMS will be saved your modem. If the modem Memory

is full, the message will saved on USIM/SIM

2. New SMS

yClick on <New> in the shortcut menu bar. An SMS creation window

will pop up;

yEnter the text.

3. Send

(1) You may enter a recipient’s number in 3 ways:

yEnter the number directly. If there are two or more recipients, use

“;” to separate each;

yEnter the name of a recipient saved in the phonebook;

yClick Icon of SMS in the pop up the window to access the

recipient’s selection window. Select one party, or more (using the

ctrl/shift key), and the click on <OK> to add the chosen party (ies)

to the recipient list.

(2) Click on <Send> to send the message. If the message is not sent, it

will be saved in the Outbox.

4. Reply

ySelect a message in the inbox and then click on <Reply> in the

shortcut menu bar;

yThe recipient’s / number will appear. It can now be modified;

yEnter the reply in input field, and then click on <Send>.

5. Forward

ySelect a message and then click on <Forward> in the shortcut menu

bar;

yThe content of the selected message will appear in the input field. It

can now be modified;

yEnter the recipient’s number and then click on <Send>.

6. Edit

yAccess the draft list to select a message, and open it by

double-clicking on it;

yClick on <Save> or <Send> when you have finished editing.

7. Delete

ySelect a message, or several messages (using the ctrl/shift key);

yClick on <Delete> in the tool bar. A dialog box will ask “Are you sure

to delete the message(s)?”

yClick on <OK> and the SMS will be deleted. Once deleted, SMS

messages cannot be restored.

8. Resend

yAccess the Outbox to select a message or several messages (using

the ctrl/shift key);

yClick on <Resend> in the tool bar;

yThe application will resend the unsent/sent message(s).

9. Export

ySelect a message or several messages (using the ctrl/shift key) in the

current list;

yThen right click mouse, to export SMS to the chosen location and

saved as a *.txt file.

Contacts

Click contacts from the main interface of PC suite to access the

contacts management.

The contacts list column contains: (U) SIM /Modem /Computer. Your

can use contacts stored either on the (U) SIM, modem or on Computer

in the corresponding window.

1. New

ySelect <New> from the tool bar to access the contacts editor;

yEnter the relevant information, and press <OK>; the new contact will

appear in the current contact list.

2. Edit

ySelect a contact and access the contact editor by selecting <Edit>

from the tool bar or by double-clicking on the contact;

yModify the relevant contact information, and select <OK> to save

the changes.

3. Delete

ySelect one contact, or more (using the ctrl/shift key);

yClick on <Delete> from the tool bar. A dialog box will ask “Are you

sure to delete the contacts?”

yClick on <OK> and the contact(s) will be deleted; deleted contacts

will not be restored.

4. Send SMS

ySelect one contact or more (using ctrl/shift key);

yClick on <Send SMS> in the tool bar;

yWhen the message is completed, you may send it by clicking on

<Send>.

5. Copy to (U) SIM card/Modem/Computer

ySelect one contact, or more (using ctrl/shift key) stored in the same

memory;

yRight-Click your mouse pointer, if selected <Copy to> in the manual

and select a target memory different from the memory being used;

yContact(s) will be copied to the target memory.

Settings

Click on settings icon from the main interface of PC Suite. A menu with

various settings will appear.

1. Network select

ySelect <Network selection> in the Settings menu. The default setting

is<Auto>;

yClick on<Manual…> to activate the network list window;

yA list of networks appears when the search is complete;

yClick <Search> an available network from the list of available

operators and click on <Select>. It will register the selected network.

2. Network mode

ySelect <Network mode> in Settings menu. The default setting is

<Auto>;

yClick on the mode which you prefer, it will search and register the

network mode which was chosen at next time of device

connection.

3. Network Band (This function is depend on product)

ySelect <Network band> in Settings menu. The default setting is

<Auto>;

yClick on the band which you prefer, it will search and register the

network band which was chosen at next time of device

connection.

4. SMS settings

Choose <SMS settings> in the Settings menu to access the SMS settings

window.

a. Service Center: The default number is found in the (U)SIM card. You

may change it.

b. Validity period:- You can choose between: 6 hours/1 day/1 week.

c. Message Alert - Click to validate the message alert sound.

5. Connection profile settings

Select<Connection profile…> in the Settings menu to access the

connection profile setting window.

<ADD>

Adding a new connection profile

Click on <Settings> and select the connect Profile to add a new

connection

yIf <ADD> is selected, the new connection profile windows will pop

up.

yPlease enter the info of requested;

yAccount (Connection Naming), Number, APN, User Name,

password and final choice which Auth Type you are using by

manually;

yClick <OK>

yPlease select you preferred network and click on <Activate> to

default your connection setting.

ySelect an item in the connection profile list;

yClick on <Delete> on the keyboard. You will be asked if you “Are

sure you delete”;

yChoose <OK> to delete the profile from the list.

ySelect an item in the connection profile list;

yClick on <Modify> to access the profile edit window;

yModify the parameters and click on <OK> to save the modification.

ySelect an item in the connection profile list;

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Alcatel Modem Handbücher

Alcatel

Alcatel LINKZONE MW41MP Bedienungsanleitung

Alcatel

Alcatel Speed Touch USB PPPoE Bedienungsanleitung

Alcatel

Alcatel Speed Touch Home Montageanleitung

Alcatel

Alcatel Link Zone MW70VK Bedienungsanleitung

Alcatel

Alcatel X515 Bedienungsanleitung

Alcatel

Alcatel AlcatelPCNT02A Bedienungsanleitung

Alcatel

Alcatel One Touch X200S Bedienungsanleitung

Alcatel

Alcatel Link Key IK40V Bedienungsanleitung

Alcatel

Alcatel One Touch X715 Bedienungsanleitung

Alcatel

Alcatel ONETOUCH X715 Bedienungsanleitung

Alcatel

Alcatel SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL)... Bedienungsanleitung

Alcatel

Alcatel One Touch x080 Einrichtungshandbuch

Alcatel

Alcatel ONE TOUCH X600 Bedienungsanleitung

Alcatel

Alcatel X220 Bedienungsanleitung

Alcatel

Alcatel Speed Touch Home Bedienungsanleitung

Alcatel

Alcatel SpeedTouch ST516 Kurzanleitung

Alcatel

Alcatel One Touch X215S Bedienungsanleitung

Alcatel

Alcatel 1000 ADSL Bedienungsanleitung

Alcatel

Alcatel Modem Bedienungsanleitung

Alcatel

Alcatel One Touch X200 Bedienungsanleitung

Alcatel

Alcatel onetouch link 4G y858 Bedienungsanleitung

Alcatel

Alcatel One Touch X210X Bedienungsanleitung

Alcatel

Alcatel One Touch W800 Bedienungsanleitung

Alcatel

Alcatel One Touch L850 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung