Copyright 2005 Alfano, S.A. Tous droits réservés. 4
Turn Off
From the main page, press the button on the
bottom right.
CIRCUIT, Configuration
From the main page, press the button on the
bottom left.
For t e visualization and t e logical recording of t e data, it is necessary,
before using t e ALFANO in race, to configure t e morp ology of t e
track.
-With the arrow « » at the top, choose the number of magnetic
strips installed on the circuit.
-With the arrow « » down, choose which band Magnetic must
start the stopwatch.
-Press on « OK » to finish the configuration of the circuit.
In the following example : configuration of a circuit with three magnetic
stripes with the departure timing from the second magnetic stripe.
This figure shows a circuit with a
magnetic stripe.
