Allen-Bradley, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Rockwell Automation maintains current product environmental information on its website at
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Publication 450L-IN002B-EN-P - January 2016 PN-315666
10001711829 Ver 01
Supersedes Publication 450L-IN002A-EN-P - July 2015 Copyright © 2016 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Disassemble Side Mounting Bracket
IMPORTANT Pressing the adapter wings too hard will cause damage to the wings. However, the bracket will still operate with damaged wings.
1. Loosen both M4 mounting clamp screws for each
bracket holding the light curtain.
2. Pull the light curtain out of all brackets.
(1)
(1)
(2)
3. Press both adapter wings simultaneously (see arrows on adapter)… 4. …and slide each adapter off the light curtain profile.
(4)
(3)
(3)
10
(0.39)
55 (2.16)
15
(0.59)
13
(0.51)
Position of Holes for Side Mounting
R3 (0.13)
R3 (0.13)
60 (2.36)
32
(1.26)
12
(0.47)
10
(0.39)
Position of Holes for Back Mounting (view from back side)
R3 (0.13)
87 (3.43)
60 (2.36)
6.6
(0.26)
6.6
(0.26)
55
(2.17)
13
(0.51)
23.5
(0.92)
