Allen + Roth 2CFWBK710480 Bedienungsanleitung
1
CORDLESS 2" FAUX WOOD BLIND
SAFETYINFORMATION
Please read and understand these instructions before attempting to assemble,
install, or operate this product.
INSTALLATION INSTRUCTIONS:
Step 1: Check Package Contents
Before installing your blind, make sure all parts listed below are present. If any
part is missing or damaged, please do not assemble, install, or operate. To
request replacement parts, contact customer service at 1-877-804-5504,
Monday through Friday from 8:30 a.m. to 5:00 p.m. EST.
Contents include:
2
A. Blind x 1
B. Valance x 1
C. Wand x 1
Mounting Hardware Kit
Mounting Hardware Kit includes:
Part Quantity
AA. Mounting Bracket 2
BB. Hold Down Bracket 2
CC. Medium Screw 4
DD. Valance Connector 2
EE. Valance Return 2
FF. Large Screw 4 (23 in. to 28 in. widths)
6 (29 in. to 36 in. widths)
8 (39 in. to 47 in. widths)
10 (48 in. to 72 in. widths)
GG. Center Bracket 1 (29 in. to 36 in.)
2 (39 in. to 47 in.)
3(48 in. to 72 in.)
HH. Valance Clip 2 (23 in. to 36 in.)
3 (39 in. to 47 in.)
4 (48 in. to 72 in.)
AA
BB
CC
DD
EE
FF
GG
HH
3
Step 2: Gather Additional Tools Required
The following tools are not included, but will be needed to complete your installation.
*Measuring Tape *Level
*Drill with 1/16-inch bit *Safety goggles
*Pencil *Step ladder (optional)
*Phillips-Head screwdriver
Step 3: Assemble the Blind(s)
Estimated Assembly Time: 30 minutes
The blind may be installed either inside or outside the window frame.
1. Mark center of window opening and center of blind (A) with a pencil.
2. Slide mounting brackets (AA) on each end of the blind (A) headrail. Position blind
(A) in window, on either the inside or outside, and align center marks. Mark position of
mounting brackets (AA) with a pencil.
4
3. Remove mounting brackets (AA) from blind (A). Pre-drill holes with 1/16-inch
drill bit. Align with holes and attach to window frame or wall using largescrews
(FF). Choose 2 diagonal holes that work best for your window frame or wall.
4. Slide center bracket (GG) onto headrail from back of blind (A). Temporarily
hang blind (A) by sliding headrail into attached mounting brackets (AA). Mark
location of center bracket (GG) with pencil. Remove blind (A).
5. Align center bracket (GG) with pencil marks and attach using largescrews
(FF); pre-drill holes with 1/16 inch drill bit. Next, hang blind (A) andsnap the
locking tab of the mounting bracket (AA).
5
6. Attach valance clips (HH) to blind (A) headrail (optional). Install the wand(C)
to the wand hook attached to the blind (A) headrail.
7. OPTIONAL: To install hold down brackets (BB), lower blind (A) to desired
position. Screw the hold down brackets (BB) into the wall or windowsillusing
medium screws (CC) and attach blind (A) at the hole in the cap onthe bottom
rail.
8. OPTIONAL: Slide valance (B) onto valance clips (HH) as
needed to centervalance (B).
6
9. OPTIONAL: When mounting the blinds outside the window frame,
valance returns (EE) will cover the ends of the headrail. Attach valance
returns (EE) to each end of valance (B) using valance connectors (DD).
Step 4. Learn How to Operate Your Blind(s)
1. Raise or lower the blind (A) by lifting or lowering the bottom rail to the desired
height.
2. Open or close the blind (A) slats by turning the wand (C) until the slats are
opened or closed to the desired amount.
CLEANING INSTRUCTIONS:
Clean using damp cloth or vacuum using proper attachments or duster.
REPLACEMENT PARTS:
If you require replacement parts, contact customer service at 1-877-804-5504,
Monday through Friday from 8:30 a.m. to 5:00 p.m. EST. Please be sure to
provide the following information, if possible:
*The complete model or item number of your product
*A description of the product
*The description of the part needed
7
ONE-YEAR LIMITED WARRANTY
For a period of one (1) year from the date of purchase, the manufacturer will
replace this window covering with one of equal value, if this window covering is
found to be defective in material or workmanship. This warranty does not cover
damage of defects caused by or resulting from improper maintenance, negligent
or improper use, abuse, misuse, neglect, accidents, act of God, alteration,
commercial use, installation, removal, or reinstallation. This warranty is restricted
to normal consumer use within the United States and Canada. To obtain warranty
service, contact our customer service department at 1-877-804-5504.
QUESTIONS?
Contact customer service at 1-877-804-5504, Monday through Friday from 8:30
a.m.
to 5:00 p.m. EST.
Printed in China
8
FRENCH
STORE SIMILI-BOIS SANS CORDON DE 2 PO
INFORMATION SÉCURITAIRE
S'il vous plaît lire et comprendre ces instructions avant de tenter d'assembler,
d'installer ou d'utiliser ce produit.
INSTRUCTIONS D'INSTALLATION:
Étape 1: Vérifiez le contenu du paquet
Avant d'installer votre store, assurez-vous que toutes les pièces énumérées ci-
dessous sont présents. Si une partie est manquant ou endommagé, s'il vous plaît
ne pas monter, installer, ou de faire fonctionner. Pour demander des pièces de
rechange, service à la clientèle de contact au 1-877-804-5504, du lundi au vendredi
de 8h30 à 5:00 pm.
Au sommaire:
9
A.
Store x 1
B.
Cantonnière x 1
C.
Baguette magique x 1
Kit de montage de matériel
Un kit de montage comprend:
Partie Quantité
AA. Support de montage 2
BB. Maintenez le support 2
CC. Vis moyenne 4
DD. Connecteur cantonnière 2
EE. Retour cantonnière 2
FF. Grande vis 4(23 po. - 28 po.) (58, 42 cm - 71, 12 cm)
6(29 po. - 36 po.) ( 73, 66 cm - 91, 44 cm)
8(39 po. - 47 po.) (99, 06 cm - 119, 38 cm)
10 (48 po. - 72 po.) (121, 92 cm - 182, 88 cm)
GG. Support central 1(29 po. - 36 po.) (73, 66 cm - 91, 44 cm)
2 (39 po. - 47 po.) (99, 06 cm - 119, 38 cm)
3(48 po. - 72 po.) (121, 92 cm - 182, 88 cm)
HH. Cantonnière Clip 2(23 po. - 36 po.) (58, 42 cm - 91, 44 cm)
3(39 po. - 47 po.) (99, 06 cm - 119, 38 cm)
4(48 po. - 72 po.) (121, 92 cm - 182, 88 cm)
AA
BB
CC
DD
EE
FF
GG
HH
10
Étape 2: Rassembler les outils supplémentaires nécessaires
Les outils suivants ne sont pas inclus, mais seront nécessaires pour compléter
votre installation:
*Crayon *Des outils utiles (non inclus)
*Tournevis cruciform *Perceuse
*Ruban à mesurer *Foret 1/16
*Niveau *Selles (en option)
Étape 3: Assembler aux stores
Estimation Assemblée Durée: 30 minutes
Le store peut être installé à l'intérieur ou à l'extérieur du cadre de la fenêtre.
1. Avec un crayon (non inclus), marquez le centre de la fenêtre et le centre du store (A).
2. Supports coulissants de montage (AA) sur chaque extrémité du store (A) headrail.
Position aveugle (A) dans la fenêtre, sur l'intérieur ou à l'extérieur, et aligner marques
de centre. Marquer la position des supports de montage (AA) avec un crayon.
Dieses Handbuch passt für folgende Modelle
19
Inhaltsverzeichnis
Sprachen:
Andere Allen + Roth Jalousie Handbücher
