Alpha Technologies Novus P1250 Bedienungsanleitung

Operator’s Manual

Novus P1250 and 1250T

U N I N T E R R U P T I B L E P O W E R S U P P L I E S

From Alpha Technologies

IMPORTANT SAFETY INSTRUCTIONS

ARE CONTAINED INTHIS MANUAL

CAUTION:

To reduce the risk of electrical shock and for the safe use of the Novus

P1250and1250TUPS’s,the following symbolsare placed throughout

this manual. Where they appear, servicing should be done only by

qualifiedpersonnel.

A DANGEROUSVOLTAGE exists in this area.Use extreme

caution.

ATTENTION;importantoperatinginstructions.Follow them

closely.

THEALPHANOVUSP1250AND1250T

SAVE THESE INSTRUCTIONS

This manual contains important installation

and operating instructions.

Keep it in a safe place.

CAUTION

RISKOFELECTRICALSHOCK

THEALPHANOVUS P1250 AND 1250T

IMPORTANTSAFETYPRECAUTIONS

Novus 1250T and P1250 UPS Safety Checklist

Only qualified personnel should service the UPS.

Carefully unpack the UPS and report any shipping damage at once.

Read this operator’s manual. If you have any questions about safe

installation,operationormaintenance,contactAlphaTechnologies.

Install the UPS upright in a well ventilated area.

Verify the UPS’s output voltage meets the voltage and current

requirements of the equipment to be protected. Do the same for the

line voltage and current input into the UPS.

The UPS should be installed on a dedicated, circuit breaker

equippedline.

Alert fire, emergency and service personnel a UPS is installed by

placing a warning label on the electrical panel and the host equip-

ment.

When connecting a load, make sure it does not draw more power

than the UPS provides.

Use proper lifting techniques when lifting the UPS (weight is 75 lbs,

34kg).

The UPS has more than one live circuit. Even if line power is not

present at the input, power can be present at the output.

SAVETHESEINSTRUCTIONS

THEALPHANOVUSP1250AND1250T

iii

Battery Safety Checklist

DANGER: Thebatterieshavehighenergyandchemicalhazards.

Thebattery compartment containsdangerousvoltages. Read this

manualfor safebatteryhandling, maintenanceand disposal

instructions.

Battery servicing should be done or supervised by personnel

trainedinhandlingofbatteriesandtherequiredprecautions.

When not in service, charge the batteries once every three months

foroptimumperformance andlonglife.

Batteries should be inspected yearly for signs of cracks, leaks or

swelling.

Always replace batteries with those of identical type and rating.

Never install old or untested batteries.

Proper disposal is required. Refer to local codes for procedures.

DANGER: Batteriesmayexplodeif burned. Do not open or

mutilate batteries. Electrolyte is harmful to the skin and eyes and

may be toxic.

IMPORTANTSAFETYPRECAUTIONS

SAVETHESE INSTRUCTIONS

THEALPHANOVUSP1250AND1250T

SAVETHESEINSTRUCTIONS

Battery Compartment Safety Checklist

DANGER: The batteries are a shock risk. Observe these precau-

tions:

NOTE: The UPS is not turned off by turning the Battery Circuit

BreakerOFF.

Never let the front enclosure touch the battery terminals. A lethal

shock can result.

Before battery servicing remove all rings, watches and other

jewellery.

Use insulated tools when servicing the batteries or the UPS. Do not

lay tools on top of the batteries.

Do not let live battery wires touch the UPS’s chassis. Shorted

wires can cause a fire or explosion.

Wear insulated gloves and eye protection when servicing the

batteries.

Switch the battery circuit breaker OFF before connecting or discon-

nectingthe batteries.

DANGER:Lead–acidbatteriesgenerateHydrogengas,apotential

fire hazard. The following precautions must be followed:

Do not smoke, use fire or create sparks near them.

Touch a grounded metal surface before servicing the batteries to

discharge any static electricity.

IMPORTANTSAFETYPRECAUTIONS

EMERGENCYSHUTDOWNPROCEDURE

Open the enclosure.

7. EMERGENCY SHUTDOWN

The NOVUS UPS contains more than one live circuit. During

an emergency, line power may be disconnected, but power

will still be present at the UPS’s output.

To prevent injury to service or emergency personnel, always

turn the battery circuit breaker OFF.

Switch the

battery circuit

breaker OFF.

Switchtheinput

circuit breaker on

the terminal block

OFF.

Switchtheinput

circuit breaker

on the terminal

blockOFF.

Turn the line circuit breaker OFF.

NOVUS P1250, 1250T

QUICK INSTALLION GUIDE

NOTE: The installer must know the safety instructions, the installation,

set–up and operating procedures in this manual before proceeding.

DANGER: To reduce the risk of fire and shock hazards, do

not expose this UPS to rain or moisture.

WARNING: Never run the UPS at more than 100% of output

power(Section3.6.3).Overloadingcandamagetheinverter,

the batteries or the control electronics.

PROCEDURE:

TurnOFF:

•All loads

•The battery, input, output and line circuit breakers.

Mount the UPS

(Section 2.1 and 2.2

or 2.3).

Connect the UPS

(Section 2.4).

Start and test the UPS

(Section 3.2, 3.4)

EMERGENCYSHUTDOWNPROCEDURE

Open the enclosure.

7. EMERGENCY SHUTDOWN

The NOVUS UPS contains more than one live circuit. During

an emergency, line power may be disconnected, but power

will still be present at the UPS’s output.

To prevent injury to service or emergency personnel, always

turn the battery circuit breaker OFF.

Switch the

battery circuit

breaker OFF.

Switchtheinput

circuit breaker on

the terminal block

OFF.

Switchtheinput

circuit breaker

on the terminal

blockOFF.

Turn the line circuit breaker OFF.

NOVUS P1250, 1250T

QUICK INSTALLION GUIDE

NOTE: The installer must know the safety instructions, the installation,

set–up and operating procedures in this manual before proceeding.

DANGER: To reduce the risk of fire and shock hazards, do

not expose this UPS to rain or moisture.

WARNING: Never run the UPS at more than 100% of output

power(Section3.6.3).Overloadingcandamagetheinverter,

the batteries or the control electronics.

PROCEDURE:

TurnOFF:

•All loads

•The battery, input, output and line circuit breakers.

Mount the UPS

(Section 2.1 and 2.2

or 2.3).

Connect the UPS

(Section 2.4).

Start and test the UPS

(Section 3.2, 3.4)

TABLE OF CONTENTS

1. INTRODUCTION .......................................................... 1

1.1 The Alpha Advantage................................................................2

1.2 Unpacking and Inspection Checklist .........................................2

1.3 ATour of the Alpha P1250 and 1250T .......................................4

1.3.1 Enclosure.......................................................................

1.3.2 Interior............................................................................

1.4 P1250Terminal Block ...............................................................8

1.5 1250TTerminalBlock................................................................9

2. INSTALLATION.......................................................... 12

2.1 Pre-Installation Checklist ....................................................... 13

2.2 Wall Mounting ........................................................................ 14

2.3 Pedestal Mounting ................................................................. 17

2.4 Wiring theUPS ...................................................................... 20

3. OPERATION .............................................................. 23

3.1 Operating Modes Quick ReferenceGuide .............................. 24

3.2 Starting and Testing the UPS................................................. 26

3.3 Shutting Down the UPS ......................................................... 27

3.4 Self Test ................................................................................ 28

3.5 Troubleshooting ...................................................................... 29

3.6 Front Panel Indicators and Controls ....................................... 33

3.6.1 On Line and On Battery LED’s .....................................

3.6.2 Low Battery LED ..........................................................

3.6.3 PercentagePowerIndicator ..........................................

3.6.4 BatteryChargeIndicator...............................................

3.6.5 Test/Manual Start Button..............................................

3.6.5.1 Test Button ........................................................................... 38

3.6.5.2 Manual Start Button ............................................................. 38

3.6.6 Standby Mode..............................................................

3.6.7 Hot Swap Mode............................................................

3.6.8 GeneratorMode ...........................................................

3.7 Low Battery Mode States ...................................................... 41

IMPORTANT

Emergencyshutdownprocedureoninsidebackcover

THEALPHANOVUSP1250AND1250T

IMPORTANT

Emergencyshutdownprocedureoninsidebackcover

TABLE OF CONTENTS

4. COMMUNICATION..................................................... 42

4.1 RS–232 Interface Port ...........................................................43

4.1.1Wiring ............................................................................

4.1.2 Software Set Up ............................................................

4.1.2.1 Terminal Emulation Set Up ..................................................... 44

4.1.2.1 Communication Parameters .................................................. 44

4.2 Main Menu............................................................................. 45

4.3 Sub Menus ............................................................................48

4.3.1RS–232 MenuTree ........................................................

4.3.2 Unit Specifications ........................................................

4.3.3UnitInput/OutputValues................................................

4.3.4MaintenanceSpecifications...........................................

4.3.4.1 Password Change Procedure ............................................... 52

4.3.5LineSlowDetectionSet–Up ..........................................

4.3.5.1 Parameter Change Procedure .............................................. 53

4.4 HowToWorkWith Menus....................................................... 55

5. MAINTENANCE......................................................... 57

5.1 RunTimeTesting ...................................................................58

5.2 Fan ReplacementProcedure..................................................60

5.3 Battery PackReplacement Procedure ................................... 61

5.4 Battery ChangingProcedure ..................................................62

5.5 Troubleshooting ...................................................................... 64

5.6 Return Instructions ................................................................66

5.7 PartsandOrdering Information ..............................................66

5.8 Specifications ........................................................................67

6. WARRANTY............................................................... 70

THEALPHANOVUSP1250AND1250T

Section One

Introduction

Thissectionintroducesyoutothe

NovusP1250and1250T

UninterruptiblePowerSupplies(UPS):

•An unpacking checklist (Section 1.2)

•A description of its various panels,

connections and switches (Sections 1.3)

•A description of the P1250 terminal

block (Section 1.4)

•A description of the 1250T terminal

block (Section 1.5)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Alpha Technologies UPS Handbücher

Alpha Technologies

Alpha Technologies ELPM300-48D Bedienungsanleitung

Alpha Technologies

Alpha Technologies Novus Micro Bedienungsanleitung

Alpha Technologies

Alpha Technologies CFR 1000 Bedienungsanleitung

Alpha Technologies

Alpha Technologies Novus 1800TP Einrichtungshandbuch

Alpha Technologies

Alpha Technologies Tri Power X33 HIMOD HP Bedienungsanleitung

Alpha Technologies

Alpha Technologies CFR 3000 Bedienungsanleitung

Alpha Technologies

Alpha Technologies Sentra 750 Bedienungsanleitung

Alpha Technologies

Alpha Technologies NEXSYS 600 Bedienungsanleitung

Alpha Technologies

Alpha Technologies FXM 650 Bedienungsanleitung

Alpha Technologies

Alpha Technologies Sentra 1000 Bedienungsanleitung

Alpha Technologies

Alpha Technologies Tri Power X33 Mod HP series Betriebsanleitung

Alpha Technologies

Alpha Technologies Tri Power X33 MOD HP2 Series Bedienungsanleitung

Alpha Technologies

Alpha Technologies Alpha Continuity 6K Bedienungsanleitung

Alpha Technologies

Alpha Technologies CFR 1500RM Bedienungsanleitung

Alpha Technologies

Alpha Technologies Sentra 1000 Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung