2
Type of precautions
Indicates a prohibited action (must not be
performed)
Indicates that disassembly is prohibited
Indicates a mandatory operation (must be
performed).
Indicates that it should draw your close
attention.
Warning
When a problem occurs, please stop
using the device immediately
Otherwise, it may result in personal injury or a damaged
product. Please return the product to the authorized Alpine
dealer or nearby Alpine service center for repair.
The product is only suitable for 12V
negative-grounded vehicles.
Otherwise, it may lead to an accident like fire, etc.
Please call a professional for wiring
and installation
It needs professional expertise and experiences to wire
and install the product. Please contact the dealer from
whom you bought the product to install it for safety.
Please do not disassemble or refit.
Otherwise, it may result in an accident, fire or electric
shock.
Small items like bolts or screws
should be kept out of the reach of
child.
If ingested, it may result in severe injury. Once ingested,
please seek medical attention immediately.
Please do not use any function that
may distract you during driving.
Any function that may influence your attention should be
used only when the vehicle is stopped completely. To use
these functions, please first stop your
vehicle in a safe
area. Otherwise, it may result in an accident.
When driving, you must maintain
the volume at a level such that the
noise outside can still be heard.
It is very dangerous not to clearly hear an emergency
vehicle alarm and road warning
signal (such as a railway
crossing) and may result in an accident. Moreover, high
volume may damage your hearing.
Caution
Please clean the product regularly with a soft dry cloth.
For any dirt difficult to clean, only water can be
used to
soak the cloth. Any other solvents may lead to dissolution.
Before starting the device, please ensure that the
temperature inside the vehicle is between +60°C and
-
In case of problems, please do not repair them by
yourself. Please return the product to the authorized
Alpine dealer or nearby Alpine service center for repair.
When PXE-X120-10DP is used with active division mode
to assign signals for speakers, please ensure that the
frequency
division point of high pitch is above 1500 Hz to
avoid damage to high pitch speakers
The device cannot be installed at the following locations:
●
Under direct sunlight and near a hot source
Places with very high humidity or near a water source
Dusty sites
● Environments with violent vibration
The text mark and logo of Bluetooth® are the registered trademarks held by Bluetooth SIG, Inc. Alpine Electronics has
been authorized to use these text mark and logo. Other trademarks and names all belong to their holders.
* Electronic products should be discarded via an appropriate recycling channel to reduce electronic waste pollution.
Copyright notice
