Alpine EZi-DAB-ONE Bedienungsanleitung

EZi-DAB-ONE

Digital Radio Interface

Safety

Before you use your EZi-DAB-ONE, read the following safety instructions.

1. Follow the operating instructions provided and take note of any warnings.

2. If you do not follow the operating instructions provided, it may compromise the safety of your product and this may invalidate the warranty.

3. Only use the supplied 12V power adapter with your product.

4. Do not install your product in a way that may interfere with the safe operation of the vehicle, or affect the deployment of air bags or other safety items.

Do not install cables and wires near the steering wheel.

5. Do not place your product on or near sources of your vehicle's heat or ventilation.

6. Do not use your product in a way that may cause careless driving or improper control of your vehicle.

7. Keep your product dry and only clean with a dry cloth.

8. Do not expose your product to naked flames.

9. Do not use your product in extremely hot or cold temperature.

10. If you need to connect your product to the rear of your vehicle's head unit, remove any power before you start to install your product. When you have

safely installed your product, you can reconnect the power. See your vehicle's owner's manual for more information.

11. Do not use the product if it is damaged.

12. Product repairs should only be carried out by authorised personnel.

Symbols on the product and in the user manual

Potentially serious risk to your personal safety. To avoid possible injury or

death, obey all safety notices with this symbol.

USBsocket rated at 1amp maximum.

Caution. Read the user manual before use. Where to switch on or off the product, or put it in standby.

12V DC

12V DC power supply.

Safety 1

Contents 2

Overview 3

What's in the box 3

Display icons 4

Controls 5

Getting started 6

Installing your EZi-DAB-ONE 6

Where to install your EZi-DAB-ONE 7

Positioning the antenna 8

Positioning the controller 10

Connecting the antenna to the controller 11

Connecting the controller to your vehicle 12

Switching your EZi-DAB-ONE on for the first time 13

Switching your EZi-DAB-ONE on and off 13

Digital radio 14

Listening to digital radio 14

Digital radio presets 14

FM transmission frequencies 15

Auxiliary input 16

Listening to music on a mobile device 16

Settings 17

Changing between the Line Out cable and FM

transmission 17

Setting your EZi-DAB-ONE to enter standby

automatically 17

Switching phantom power to the aerial on and off 18

Radio settings 18

Display settings 19

Updating the software 21

Troubleshooting 22

Contents

Overview

What's in the box

Before you get started, check you have everything below.

123

1Antenna, with magnetic grounding tail attached 5Cleaning cloth

2DAB film aerial 612V power adapter (dual USB port)

3Controller with USBpower and audio connectors 7Self-adhesive cable clips

4Controller bracket

Display icons

The icons below appear on the screen of the controller.

256

1Digital radio mode 4Auxiliary input mode

2Digital radio signal strength 5FMtransmit enabled

3Traffic announcements enabled 6FM transmit frequency

Controls

1 Presets Press to view your digital radio presets. When in this menu,

press and hold to save the current station to a preset number.

2Select Press to select a radio station or menu option.

3 Power /

Back

Press to switch your EZi-DAB-ONE on. Press and hold to put

your EZi-DAB-ONE in standby. Press to go back to the previous

screen or cancel an action.

4 Previous Press to choose the previous radio station or menu option.

5 Next Press to choose the next radio station or menu option.

6 Home Press to open the main menu.

7 FMChannel Press to view stored FM transmission frequencies. When in this

menu, press and hold to store the current FM frequency to an

FMchannel.

Getting started

Installing your EZi-DAB-ONE

Before you can start using your EZi-DAB-ONE, you need to do the following:

1. Position the antenna in your vehicle.

2. Position the controller in your vehicle.

3. Connect the antenna to the controller.

4. Connect the controller's power and audio cables to your vehicle.

5. Switch your EZi-DAB-ONE on for the first time.

Vehicle requirements

lFitted audio system with auxiliary (3.5mm) port or FM receiver.

lStandard 12V negative earth power supply. Your EZi-DAB-ONE is not suitable for use with a 24V power supply.

Getting the best DAB signal

As with FMradio, DAB signal coverage changes depending on your location. As you use the EZi-DAB-ONE in your vehicle, you

may travel through areas where DAB signal coverage is poor.

To help get the best DAB signal when coverage is poor or there is a weak signal:

lFollow the installation instructions carefully.

lUse the supplied 12V power adapter, as other third-party adapters can cause interference.

lSwitch off other devices in your vehicle that aren't in use. Devices such as satellite navigation systems and dashboard

cameras can cause interference.

Where to install your EZi-DAB-ONE

It's important to install your EZi-DAB-ONE in a safe location in your vehicle. Do not fit any components in

locations that may interfere with safe operation of the vehicle, or affect the deployment of air bags or other safety

products. Keep cables and wires away from the steering wheel.

Where to install the antenna

We recommend you install the antenna for your EZi-

DAB-ONE in the top corner of the windscreen, on

the passenger's side of your vehicle.

Install the antenna so that it is not within the swept

area of the windscreen. Make sure the antenna and

wireless controller do not obstruct the view of the

driver.

If you have a heated windscreen in your vehicle, or the windscreen contains metallic UVfilters, it can cause interference for

the DAB signal. Install the antenna on a part of the windscreen that does not contain heating elements or UV filters.

For more information on where to safely install your EZi-DAB-ONE in your vehicle, contact your local dealer.

Positioning the antenna

1. Choose a position for the antenna, so that it's as high as possible on

the windscreen and at least 4cm from the side of the screen.

Make sure the antenna does not obstruct the view of the driver.

2. Gently pull down the front of the roof liner in your vehicle, until there is

a small gap.

3. Push the magnetic grounding tail through the gap, with the

silver-coloured magnet facing upwards. Make sure the magnet

touches your vehicle's metal bodywork.

Inhaltsverzeichnis

Sprachen:

Andere Alpine Aufnahmegeräte Handbücher

Alpine

Alpine PXE-H650 - System Integration Audio... Bedienungsanleitung

Alpine

Alpine PXE-0850S Bedienungsanleitung

Alpine

Alpine PXA-H100 Bedienungsanleitung

Alpine

Alpine 3007 Bedienungsanleitung

Alpine

Alpine PXE-0850X Bedienungsanleitung

Alpine

Alpine KCX-C250MC Bedienungsanleitung

Alpine

Alpine APF-V100GM Bedienungsanleitung

Alpine

Alpine APF-X310MIB Bedienungsanleitung

Alpine

Alpine 3321 Bedienungsanleitung

Alpine

Alpine 3362 Bedienungsanleitung

Alpine

Alpine PXA-H100 Bedienungsanleitung

Alpine

Alpine KCE-250BT Bedienungsanleitung

Alpine

Alpine ERA-G311 Bedienungsanleitung

Alpine

Alpine KCX-C2600B Bedienungsanleitung

Alpine

Alpine PXE-X09 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch