Alpkit BLIP Bedienungsanleitung
EASTWOOD | HATHERSAGE | AMBLESIDE
KEEP ME SAFE FOR FUTURE REFERENCE
DATE: 01/03/18
BLIP
IMPORTANT:
Thank you for purchasing the Alpkit Blip safety light. Please curtail
your excitement and do not use this product until you have read,
understood, and complied with all the instructions and warnings
contained within this manual.
Introducing Blip, your new twin pack of
red LED caution lights. Oh the places
you’ll go and the things you’ll be seen
by with this versatile little pair. You can
attach your blip to anything, everything,
and everyone (although you should
probably ask permission rst).
Water Resistance
Burn Time
Strobe 95 h IPX5
WARNING
◉Do not shine torch directly into your eyes.
◉Do not submerge.
◉Do not disassemble or modify this product as it will
invalidate your warranty.
◉Keep Blip clean to prevent dirt and dust from entering
the electric elements.
◉Remove any moisture before storage.
◉Choking hazard; keep out of reach of children.
BATTERIES
◉CR1632 Coincell Lithium Battery
SPECIFICATION
Bulb: 1 x Cree LED
CARE AND MAINTENANCE
◉Clean with a damp cloth.
◉Ensure that the Blip is dry before storing, store in a dry
place.
If this product does not meet your expectations upon
delivery or does not live up to the demands placed
upon it, please return it within 3 years of purchase for
repair, replacement or refund. If the problem is our
fault then we will do this to your satisfaction, if it’s
your fault we will help the best we can!
Email: [email protected]
Phone: 01773 417007
Website: www.alpkit.com/support
CONTINUE THE JOURNEY
When your partnership with this product is over please
don’t leave it hidden in a cupboard, never to see another
adventure. Wash it, pass it on, give to a friend, sell it, donate
it to charity, make it into something else or recycle it and let
someone else live their dream.
HACK, PATCH & SEW
In store service for your kit: alpkit.com/stores
For more ideas on how you can extend the life of or donate
your outdoor products visit: alpkit.com/continuum
INSTRUCTIONS FOR USE
First use: Open the light and hold the main part.
Pull out the insulation strip, then put the light back together.
SERVICE AND REPAIRS
If the torch does not work, check that the battery has been
inserted the right way around and that it is not at. Check
that there is no water in the torch, dry thoroughly if there is
and try again. Check contacts for signs of corrosion caused
by the battery leaking or through damp. Clean contacts with
a light emery cloth. If issues cannot be corrected using these
instructions, contact Alpkit for advice.
CHANGE THE BATTERIES
Open the light and hold
on to the main part, insert
one CR1632 battery in the
direction indicated within the
battery compartment.
! Do not use rechargeable
batteries, doing so will
invalidate your warranty
To turn on:
Press the power button in the middle of the light. Press power
button again to turn o.
CR1632
DISPOSAL AND RETURNS
This product contains Lithium batteries which are classied
as “Hazmat items”. These items are classied as dangerous
goods and may pose a risk when transported commercially.
Throwing batteries in the household bin can be hazardous to
the environment and your health. You can recycle them by:
◉Returning them to us to dispose of safely,
◉Returning them to the store where you bought them to
dispose of safely,
◉Visiting RecycleNow.com to nd your
nearest battery bank.
Any torch with a WEEE icon (the crossed-out
wheelie bin) cannot be put in household waste.
Instead, either:
◉Return to us to dispose of for you,
◉Visit RecycleNow.com to nd your nearest
electricals recycling point.
Andere Alpkit Taschenlampe Handbücher
