ALT M19 Benutzerhandbuch
AUTOCLAVE LOGGER THING
Wireless Autoclave Data Recorder
Model: M19 & M22 & M42
User and Setup Manual
Works With
1
Your Autoclave Logger Thing carries a one-year warranty, from
date of purchase, against manufacturers defects. At our discretion
we will either repair or replace your device free of charge for the
period of one year. This warranty does not cover the autoclave or
guarantee sterility of instruments. This warranty does not cover
physical damage to the unit, modification or negligence. Nothing
else is covered either written or implied. aLT, LLC shall not be held
accountable for damages beyond the cost of if the original value of
the unit.
To obtain warranty service please send an email to
info@autoclaveloggerthing.com.
You must obtain an RMA prior to returning anything to aLT, LLC.
2
Table of Contents
Autoclave Logger Thing Overview ....................................................................................................5
Security, Design and Operation .........................................................................................................6
Installation ............................................................................................................................................8
M19....................................................................................................................................................8
M22..................................................................................................................................................10
Setup...................................................................................................................................................12
1. Connecting to your network..................................................................................................13
DHCP Setup .................................................................................................................................14
Static IP Setup..............................................................................................................................15
2. Time Setup ...............................................................................................................................16
3. Drop Box Setup........................................................................................................................ 17
File Storage & Dropbox .....................................................................................................................19
Dropbox ..........................................................................................................................................19
3
SD Card...........................................................................................................................................20
Log Indicators. ...................................................................................................................................21
Battery Replacement........................................................................................................................ 22
Tips and Troubleshooting...................................................................................................................24
FCC Warning......................................................................................................................................25
4
What You Need Before You Start
Tools
oPhilips Screwdriver (#2)
Info
oAutoclave Logger Thing Serial # __________________________________
oWi-Fi Network Name (SSID) __________________________________
oWi-Fi Network Password __________________________________
oDropbox Email __________________________________
oDropbox Password __________________________________
oAutoclave Name (Your Choice) __________________________________
5
Autoclave Logger Thing Overview
Reset Input Connect
SD Slot Card
FIGURE 1
6
Security, Design and Operation
The Autoclave Logger Thing (aLT) is designed to operate on a majority of 802.11 b/g/n
networks using standard protocols. DHCP and Static IP setup is an option.
The aLT has been designed to operate securely. Once setup, all incoming connections are
disabled. Only 2 secure outgoing connections occur over secure HTTPS connection protocols.
For Security the aLT requires a password to connect to it. The password is the device serial
number. The network configuration page is only available upon initial startup or after a hard
reset. This security feature is to prevents unauthorized access to the device and your network.
After the configuration and setup all other incoming data is disabled.
SD Card may be removed when not running a cycle, if the card is removed during a cycle it
will not be properly saved and will corrupt the data for the entire run. Removing the SD card
when logging must be avoided.
The reset button located to the left if the cable connector (figure 1) serves 2 purposes: First, a
quick press displays the IP address of the wireless connection. Second, a hard reset (held for 3
seconds) will erase all configuration data. This should be used only if you are changing
7
networks, the network password has changedor you are changing between DHCP and static
protocols.
The only function of the aLT is to mechanically record the data from the autoclave, save it
and upload it to the cloud. All proper loading, handling, storing and Biological testing should
be performed in accordance with the autoclave manufacturer.
The aLT is equipped with a battery (CR1220) to back up the Real Time Clock in the event of a
power failure. This retains the clack time and date after a power failure. With normal use the
battery should last 5 years or more. It is recommended to replace the battery every 5 years to
ensure stable operation and to prevent leakage due to a severely discharged battery.
8
Figure 2
Installation
M19
1. Unplug autoclave power cord.
2. Remove right side panel.
•Remove 2 top screws.
•Pull panel top out and push down to release.
3. Remove Inspection plate.
4. Insert cable side marked “Autoclave”.
5. Pass cable end over the chamber to the right.
6. Connect cable with the side marked “Autoclave” into the connector marked “Printer”
•The printer connector may vary in location based on the age and version of
mainboard.
NOTE: The printer connector may have a cable plugged it to it.
Remove this cable and discard.
It will not be needed for use with the aLT.
B
A
9
7. Reinstall right side panel.
•Ensuring both tabs are locked into the base (see insert B, Figure 2)
•Install 2 screws in top cover.
8. Reinstall inspection plate with the wire passing through the notch in the front left of the
panel. (see insert A, Figure 2,)
9. Connect cable to the aLT.
10. Place the unit visibly on the top of the autoclave.
Note: Do not place items that may damage it or block the Wi-Fi signal
on the aLT.
Especially hot and/or metallic items such as trays or instruments.
11. Plug-in autoclave power cord.
12. When “Autoclave Logger Thing” appears on the aLT screen you can proceed to Setup.
•If not see troubleshooting section.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
