Altec Lansing FM912-8A SPEAKER SYSTEM Benutzerhandbuch

FREQUENCY RESPONSE 1, 2

120 Hz - 15 kHz (±3 dB)

USABLE LOW FREQUENCY LIMIT (-10 dB) 1, 2

80 Hz

SENSITIVITY 3

100 dB SPL

POWER HANDLING 4

125 W continuous; 500 W peak

MAXIMUM OUTPUT (1 m) 5

121 dB SPL continuous; 127 dB SPL peak

COVERAGE ANGLES 6

95o(horizontal) x 95o(vertical)

DIRECTIVITY FACTOR, Q 6

9.30

DIRECTIVITY INDEX, Di 6

9.68 dB

TRANSDUCER COMPONENTS

LF: 1x 12 in. Woofer in a Sealed Enclosure (CD912-8B)

HF: 1x 1.5 in. Phenolic Dome Tweeter (CD912-8B)

IMPEDANCE 7

Nominal: 8.0 Ohms

Minimum: 5.0 Ohms at 5,500 Hz

CROSSOVER FREQUENCY

Passive LF-HF: 2,200 Hz

HARMONIC DISTORTION 8

1% rated power 10% rated power

2nd Harmonic 0.24% 2nd Harmonic 0.74%

3rd Harmonic 0.38% 3rd Harmonic 0.62%

THD 0.63% THD 1.47%

INPUT CONNECTIONS

2x 1/4 inch phone jacks and 2x NL4

ENCLOSURE MATERIALS & FINISH

18 mm, 13 ply Poplar Plywood Finished with

Charcoal Grey or White Catalyzed Polyurethane

SUSPENSION SYSTEM 9

This loudspeaker is not designed for overhead suspension

DIMENSIONS

12.40 in. (H) x 16.00 in. (W) x 15.5 in. (D)

315 mm (H) x 406 mm (W) x 394 mm (D)

WEIGHT

Net: 30 lbs. (13.6 kg)

Shipping: 36 lbs. (16.4 kg)

FM912-8A

FEATURES - THE ALTEC LANSING DIFFERENCE

• High Fidelity 12” / 300 mm Duplex®Speaker

• High Performance 125 W AES / 500 W Peak Power Handling

• Flexible Dual Aiming Angle (30°/60°) 18 mm/13-Ply Poplar

Cabinet Fills A Wide Variety Of Needs

• Cloth Covered Perforated Steel Grille

• Neutral Grille Cloth Included For Custom Color Matching

• Dual Neutrik®Speakon®and 1/4” Phone Jack Input Connectors

• Internal Steel Stand Adaptor

• Available in Charcoal Grey Or White Finishes

GENERAL PRODUCT DESCRIPTION

Based on Altec Lansing’s popular CD912-8B 12 inch / 300 mm

Duplex®speaker component, the FM912-8A offers superior

performance in a compact, easy-to-install package. The FM912-

8A is well-suited for a variety of floor monitor applications in

Auditoria and Houses of Worship.

Altec Lansing’s high performance model CD912-8B Duplex®is a

point-source 12 inch / 300 mm speaker with a robust corrosion-

resistant die-cast frame and weather-resistant low frequency

speaker cone mated to a 1.5 inch phenolic tweeter assembly.

The extended frequency response insures that both voice and

music program material will be faithfully reproduced.

The unique dual aiming angles for 30° or 60° allows for

maximum versatility as a floor monitor. The internal stand-

mount makes the FM912-8A an excellent choice for portable

applications. The charcoal grey or white painted cabinet blends

into most backgrounds, or it can be easily painted to match any

décor. Altec Lansing includes neutral grille cloth with each

speaker, allowing you to dye the cloth to integrate the speaker

into most surroundings.

To extend the low-frequency performance of the FM912-8A,

Altec Lansing offers the accessory model LF115-8A subwoofer.

The LF115-8A features a single 15 inch / 370 mm low frequency

speaker in a rectangular enclosure.

PROFESSIONAl

1000 W. Wilshire Blvd., Suite 362 • Oklahoma City, Oklahoma 73116 • Phone: 1-405-848-3108 • Fax: 1-405-848-3217 • www.altecpro.com

ARCHITECTS & ENGINEERS SPECIFICATION

The loudspeaker system shall be a two-way multi-purpose

type consisting of a 12 inch / 300 mm Duplex®loudspeaker

component with a wide-dispersion dome tweeter. The

crossover network shall be a dual-section, 12 dB/octave

slope low pass and 12 dB/octave slope high pass with an

electro-acoustic crossover frequency of 2,200 Hz. The

loudspeaker system shall have an operating bandwidth of

120 Hz - 15 kHz with a sensitivity of 100 dB when

measured at a distance of one meter. The power handling

capability shall be 125 W AES (500 W peak). Nominal

impedance shall be 8.0 Ohms with a minimum impedance

of 5.0 Ohms at 5,500 Hz. The loudspeaker shall have

nominal coverage angles of 95 degrees in the horizontal

plane and 95 degrees in the vertical plane. The unit shall

be a Sealed Enclosure, constructed of 18 mm Poplar

plywood painted charcoal grey or white with a cloth

covered metal grille. The cabinet shall include a steel

stand mount adapter. The dimensions shall be 12.40

inches (315 mm) high by 16.00 inches (406 mm) wide by

15.50 inches (394 mm) deep. The loudspeaker system shall

weigh 30 pounds (13.6 kg). The loudspeaker system shall

be the Altec Lansing Professional model FM912-8A.

As we are continually striving to improve Altec Lansing products, specifications are subject to change without notice.

Please visit www.altecpro.com for the lastest information on Altec Lansing Professional products.

ONE-THIRD OCTAVE POLAR RESPONSE CHARTS

6 dB / DIVISION

Horizontal

Vertical

E5471 REV03

1000 W. Wilshire Blvd., Suite 362

Oklahoma City, Oklahoma 73116

Phone: 1-405-848-3108 • Fax: 1-405-848-3217

Web: www.altecpro.com • Email: [email protected]

PROFESSIONAl

DIMENSIONS ARE IN INCHES.

DIMENSIONS SHOWN IN ( ) PARENTHESES ARE IN MILLIMETERS.

60º

30º

4.98 [126.60]

13.02 [330.64]

9.82 [249.32]

2.99 [76.00]

15.87 [403.00]

16.18 [411.00]

15.51 [393.94]

12.41 [315.14]

MOUNTING DIMENSIONS

SPECIFICATION NOTES

1 The frequency response of the loudspeaker system is measured at a distance of no less than 3 meters to obtain full range data. The level is

then corrected to be equivalent to a 2.83 V 1 m measurement. A near field measurement of the loudspeaker system is performed for

frequencies below 500 Hz. This data is then combined with the full range measurement to give an accurate composite frequency response

curve.

2 The limits of the frequency response are referenced to -3 dB of the systems rated sensitivity.

3 The sensitivity of the loudspeaker system is the log based average SPL taken over the intended bandwidth of operation for the system with a

2.83 V swept sine stimulus. The data is measured and level corrected in a manner consistent with note 1.

4 The power handling capacity of the loudspeaker system is tested using a full range form of AES Standard 2-1984. The test stimulus is band

limited (40 Hz – 16 kHz) pink noise with a 6 dB crest factor. The applied RMS voltage is determined using the minimum impedance of the

system. The amplifier used to drive the system has a minimum operating headroom of 6 dB referenced to the RMS voltage.

5 The maximum output level of the loudspeaker system is calculated based on the sensitivity and the power handling capabilities of the

system.

6 The coverage angles for the loudspeaker system are taken as the -6 dB points of the directivity response and averaged from 500 Hz – 16 kHz.

7 The minimum impedance of the loudspeaker system is taken over its intended band of operation.

8 The distortion measurements of the loudspeaker system are performed at a distance of 1 m with RMS input voltages corresponding to 1%

and 10% of rated system power handling calculated using minimum system impedance. The distortion percentages are log based averages

from 300 Hz – 3 kHz.

9 This loudspeaker system is not designed for overhead suspension.

VISIT WWW.ALTECPRO.COM FOR

• Authorized EASE®data on Altec Lansing Professional speakers.

• Specification sheets in .pdf format. Download page 1 of the specification sheet for your submittals.

• One paragraph A & E Specifications in .doc format

Andere Altec Lansing Sprecher Handbücher

Altec Lansing

Altec Lansing 416 LF SPEAKER Bedienungsanleitung

Altec Lansing

Altec Lansing IML 237 Bedienungsanleitung

Altec Lansing

Altec Lansing inMotion iM11 Original Betriebsanleitung

Altec Lansing

Altec Lansing 807-8A HF DRIVERS Bedienungsanleitung

Altec Lansing

Altec Lansing 416-8C LF SPEAKER Bedienungsanleitung

Altec Lansing

Altec Lansing 19 HI FI SPEAKER Bedienungsanleitung

Altec Lansing

Altec Lansing IMW575 Bedienungsanleitung

Altec Lansing

Altec Lansing 220 Bedienungsanleitung

Altec Lansing

Altec Lansing expressionist CLASSIC FX2020 Bedienungsanleitung

Altec Lansing

Altec Lansing 409 CEILING SPEAKERS Bedienungsanleitung

Altec Lansing

Altec Lansing LF-1 Bedienungsanleitung

Altec Lansing

Altec Lansing 807-8A HF DRIVER Bedienungsanleitung

Altec Lansing

Altec Lansing DTS945A-F SPEAKER SYSTEM Bedienungsanleitung

Altec Lansing

Altec Lansing 405 CEILING SPEAKER Bedienungsanleitung

Altec Lansing

Altec Lansing inMotion IM310 Bedienungsanleitung

Altec Lansing

Altec Lansing INMOTION IMT207 Installationsanleitung

Altec Lansing

Altec Lansing 168B PAGING HORN Bedienungsanleitung

Altec Lansing

Altec Lansing 421-8LF LF SPEAKER Bedienungsanleitung

Altec Lansing

Altec Lansing EP8 CEILING SPEAKERS Bedienungsanleitung

Altec Lansing

Altec Lansing Duplex DTS945A-F Bedienungsanleitung

Altec Lansing

Altec Lansing JACKET H2O III Bedienungsanleitung

Altec Lansing

Altec Lansing 406B LF SPEAKER Bedienungsanleitung

Altec Lansing

Altec Lansing 409 E CEILING SPEAKERS Bedienungsanleitung

Altec Lansing

Altec Lansing 515C LF SPEAKER Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung