Altec Lansing Professional SLS6221 Bedienungsanleitung
System Specifications
Frequency Response: 32 Hz – 18 kHz (-10 dB)
Maximum Output: 101 dB SPL (1m)
System Power: 58 watts RMS @ 1% THD
Satellite Power: 7 watts RMS @ 1% THD
Subwoofer Power: 44 watts RMS @ 1% THD
System THD (Input to Amplifier Output): <0.6% THD @ 1 kHz
Signal-to-Noise Ratio: > 78 dB
Channel Separation: > 55 dB
Input Impedance: 10 k ohm
Input Sensitivity: -11.76 dBu (200 mV RMS)
Maximum Input Level: +12 dBu (3.08 V RMS)
Volume Control: 70 dB attenuation maximum
Treble Level Control: +/- 9 dB @ 10 kHz
Bass (Subwoofer) Level Control: +/- 10 dB @ 100 Hz
Recommended Headphone Load Impedance: 32 ohms, each channel
Headphone Output: 7mW into 32 ohms, both channels driven
Drivers (per satellite): Six 1” / 25 mm full-range 8 ohm micro drivers
Subwoofer Driver: One 6.5” / 165 mm long-throw 4 ohm woofer
Cables (Supplied with SLS6221) • Satellite: 4-pin DIN cable (3 m / 9.8 ft.) with extension (2 m / 6.6 ft.)
• Controller: 9-pin DIN cable (3 m / 9.8 ft.)
• RCA input cable (5 m / 16.3 ft.)
AC Power Requirements: • 120 V AC @ 60 Hz (USA, Canada and applicable Latin American and Asian countries).
• International versions with 220 V & 230 V power supplies are available.
Input Connections: • Stereo RCA inputs Red (right) and White (left) on rear panel of subwoofer.
• One 3.5 mm stereo input on rear panel of subwoofer.
• One 3.5 mm auxiliary input is located on the wired control pod.
Controls: • Wired Control Pod: Rotary Up/Down Volume, Bass, Treble, and On/Standby
• Infrared Wireless Remote: Up/Down Volume, Bass, Treble, and On/Standby
Enclosure Material & Finish: • Satellites: Black injection-molded plastic with painted metal grill
• Subwoofer: Black painted 9 mm MDF with injection-molded front panel
and painted metal grill
Satellite Dimensions: • 2.5" (W) x 1" (D) x 14.4" (H)
• 64 mm (W) x 26 mm (D) x 365 mm (H)
Subwoofer Dimensions: • 8.5" (W) x 7.9" (D) x 16" (H)
• 216 mm (W) x 198 mm (D) x 406 mm (H)
Weight: • Shipping: 22.5 lbs (10.2 kg)
• Net weight of satellites, subwoofer and control pod: 19 lbs (8.6 kg)
Visual communication is a powerful thing, but nothing adds to the overall impact like
high-fidelity audio. Flat panel displays (FPDs) are the video communication media of choice
for corporate, institutional, retail, and commercial clients – anyone who wants to present
high-impact, high-resolution visual information.
Unfortunately, choices for FPD audio playback have been limited to low-performance,
poor-quality speaker systems. Until now.
Introducing the Altec Lansing SLS6221 system. The first professional-quality 2.1 powered
audio system specifically designed for use with FPDs. Now you can provide your clients
with high-fidelity, high-definition audio to match the quality of their video presentations.
© 2004 Altec Lansing Professional. All rights reserved.
1000 W. Wilshire Blvd., Suite 362, Oklahoma City, OK 73116
Visit www.altecpro.com
PROFESSIONAl
Introducing a Sound Solution
for All Flat Panel Displays
SLS6221
Proudly distributed by
in the United States www.electrograph.com 1-800-776-5768
PROFESSIONAl
RIGHT LEFT CONTROLLER INPUT R L
AUDIO INPUT
[fold][fold]
A ported subwoofer completes the sound with low-frequency, full-throated bass. Set in a low-resonance
wood cabinet for maximum sound with minimal distortion, the narrow-profile cabinet contains a long-
throw 6.5” (165 mm) woofer designed to reproduce dynamic audio program material down to 32 Hz.
The subwoofer also contains seven discrete power amplifiers and the line array circuitry.
Note the controlled, uniform vertical dispersion
pattern of the high-frequency program material.
The audio is directed at the listener, not at floor
or ceilings. The music and voice reproduction
comes right at you, in its purest, most natural
form uncluttered by reflections.
Orange = Discernable sound
The Altec Lansing SLS6221 features two ultra-slim satellites with a total of
twelve 1” neodymium micro drivers, with each pair of micro drivers
powered by its own discrete amplifier. From 150 Hz to 20 kHz, the
frequency spectrum is split into three distinct overlapping bands and fed into
micro drivers that are set at a precise distance from each other. A
combination of precise driver spacing and low pass filters for each pair of
drivers delivers a predictable vertical coverage pattern of 40˚ – 60˚ above
1,500 Hz. The end result is a crisp, high-fidelity, fully intelligible sound that is
focused on the listening area.
Whether placed at the head of a corporate board room or as part of a high traffic point-of-sale
retail kiosk surrounded by reflective surfaces and high ambient noise, the sound must be
delivered to its audience with minimal impact to surrounding locations. The Altec Lansing
SLS6221 uses patent pending line array technology to focus voice and music into the area
directly in front of the plasma screen.
Advanced Technology
Delivers Predictable Sound Coverage
SLS6221
The World’s Smallest Line Array
• SLS6221 satellites are magnetically shielded to work with any
kind of display, including standard CRTs. The subwoofer is
not magnetically shielded.
• A wired control pod and wireless IR remote allow you
to adjust volume, bass and treble, as well as mute
the entire system.
• A headphone jack located on the control pod allows
private monitoring of the audio output. Use of the
headphone jack mutes the speakers.
• The SLS6221 is offered in 120 V, 220 V and 230 V versions.
Powerful Subwoofer
Versatility of Installation
Additional Features
Each SLS6221 system comes with three convenient
mounting options:
• Bracket system to mount the speakers to the
center mounting position of most FPDs.
• Satellite stands for use on table tops.
• Threaded inserts on the back of each satellite for
surface or ceiling mounting using standard
industry mounting brackets.
Low pass filtering actively directs
specified frequencies of sound to
a different pair of micro drivers.
This process, combined with the
critical distance between each
micro driver, creates the focused
coverage pattern in front of the
flat panel display.
SLS6221
Hard-wired cables (3 m / 9.8 ft.) with an additional extension cable (2 m / 6.6 ft.)
are provided for satellite to subwoofer connections. A stereo RCA input cable (5
m / 16.3 ft.) is also provided for connecting the FPD to the subwoofer.
Second pair
(150 Hz – 6 kHz)
Third pair
(150 Hz – 1 kHz)
First pair
(150 Hz – 20 kHz)
[fold][fold]
Andere Altec Lansing Sprecher Handbücher
Altec Lansing
Altec Lansing 405-8H Bedienungsanleitung
Altec Lansing
Altec Lansing CF108-4T Bedienungsanleitung
Altec Lansing
Altec Lansing ORBIT USB Bedienungsanleitung
Altec Lansing
Altec Lansing 902-16B HF DRIVERS Bedienungsanleitung
Altec Lansing
Altec Lansing CD912-8A CEILING SPEAKER Bedienungsanleitung
Altec Lansing
Altec Lansing Jacket H20 Bedienungsanleitung
Altec Lansing
Altec Lansing 2100 Bedienungsanleitung
Altec Lansing
Altec Lansing XPEDITION 850 Bedienungsanleitung
Altec Lansing
Altec Lansing 3182 LF SPEAKER Bedienungsanleitung
Altec Lansing
Altec Lansing SoundRover 50 Bedienungsanleitung
Altec Lansing
Altec Lansing VS2320 Bedienungsanleitung
Altec Lansing
Altec Lansing LIFEJACKET XL Bedienungsanleitung
Altec Lansing
Altec Lansing inMotion IM310 Bedienungsanleitung
Altec Lansing
Altec Lansing 902-16A Bedienungsanleitung
Altec Lansing
Altec Lansing 3154 Bedienungsanleitung
Altec Lansing
Altec Lansing 205 CEILING SPEAKER Bedienungsanleitung
Altec Lansing
Altec Lansing 4156-8A LF SPEAKER Benutzerhandbuch
Altec Lansing
Altec Lansing 220 Bedienungsanleitung
Altec Lansing
Altec Lansing 221 Bedienungsanleitung
Altec Lansing
Altec Lansing Expressionist BASS FX3022 Montageanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung