Altec XLJACKET IMW645 Bedienungsanleitung

Item # IMW645

Owner’s Manual

Introduction

Thank you for purchasing the Altec Lansing IMW645 Portable Bluetooth Speaker with Surround Sound. You

can use this speaker to listen to audio wirelessly from devices such as smart phones, computers, iPods, tablets

and most other Bluetooth sound sources. Please read this manual carefully FIRST in order to get the most out

of your speaker.

Package Contents

1. IMW645 xlJacket Portable Bluetooth Speaker with Surround Sound

2. Extra Skin

3. AC Adapter

4. 3.5mm Auxiliary Cable

5. Owner’s Manual with Warranty Information

Technical Specifications

- Battery Life: up to 8 hours

- AC Adaptor: 16V, 1.59A

- Power Adapter Input Rating: 100~240V, ~50/60Hz

Charging Your Speaker

1. Connect one end of the included AC power adapter cable to the IMW645 DC input jack. Then plug the other

end of the AC adapter into a suitable power outlet to recharge your speaker’s internal rechargeable battery.

NOTE: The internal battery of your speaker takes approximately four hours to charge when completely drained.

2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn off

when your unit is fully charged.

Understanding the LED Status Indicators

Power and Bluetooth Indicator Light

Blinking Blue LED = Bluetooth not connected. (Ready to pair.)

Solid Blue LED = Bluetooth connected.

Charging Indicator Lights

Solid Red LED = Charging

Red LED OFF = Charged Full.

Powering Your Speakers ON & OFF

1. Press and hold the “POWER” button for 2 seconds to turn on the unit. The Bluetooth LED light will start

blinking slowly. Now you can ready to pair your audio source with your IMW645 speaker.

2. Press and hold the “POWER” button for 2 seconds to turn off the unit.

Power Saving Mode

The IMW645 will enter a power saving mode if no audio is played for 30 minutes. Press and hold power button

for two seconds to wake the IMW645.

Setting Up Your IMW645 Bluetooth Music Receiver

Bluetooth Device Compatibility

Your speaker connects with all Bluetooth devices that support the A2DP profile including iPads, iPhones, iPod

touches, and most smart phones, laptops and tablets.

Pairing a Bluetooth Device with Your Speaker

Press and hold the “POWER” button for two seconds to turn on the unit. The Bluetooth LED light will start

blinking slowly. Now you are ready to pair your device with your IMW645 speaker.

1. Go to the Bluetooth Manager of your Bluetooth device.

2. Search Bluetooth devices and select “IMW645” to start connecting.

3. Enter “0000” if your device asks for the PIN code.

4. Once paired, the unit will beep and the Blue LED light will turn on steadily.

5. Although the unit can only stream audio from one device at a time, it is capable of being paired with up to

eight devices. This means that you only have to enter the PIN code one time for each device.

Connecting a Paired Bluetooth Device

1. You should only need to pair your Bluetooth device with your speaker one time.

2. The next time your Bluetooth device and the unit are in range of each other, and the Bluetooth feature is

turned on, they should automatically connect.

3. The unit will only automatically connect to the last Bluetooth device it was connected to.

4. If your paired device does not automatically connect, navigate to the Bluetooth menu on your device and

select “IMW645” from the list.

Note: Your IMW645 can pair with and remember multiple Bluetooth devices; however it can only connect with

one device at a time. For more detailed instructions, please visit the FAQ section.

Playing Audio from Your Bluetooth Device

1. Once your media device is connected to the unit, simply start playing the music, movie or game and all the

audio will automatically be played through IMW645.

2. Press “BLUETOOTH” to play/pause the audio.

3. Press + or - to adjust the volume level of the unit.

4. Keep in mind that the IMW645 has a 30 foot Bluetooth wireless range.

Note: The volume controls on your media device work separately from the volume controls on IMW645.

3D Surround Effect

This setting allows you to adjust the surround sound effect. Press the “3D” button repeatedly to toggle between

turning this setting on or off.

When there is an incoming call:

1. Press “BLUETOOTH” to pick up the call.

2. Press and hold “BLUETOOTH” to reject the call.

3. During a call: Press “BLUETOOTH” again to hang up the call.

To Disconnect Your Bluetooth Device

Turn off the connected device or press “BLUETOOTH” for two seconds to disconnect the Bluetooth device.

*The Blue Bluetooth indicator flashes slowly after disconnect the device.

Reconnecting Your Device

If you move out of range or turn off the Bluetooth feature on your device, the unit will disconnect from your

device. To reconnect, simply access the Bluetooth Manager on your device and select IMW645.

You will not be asked to enter the PIN code again. You can also press “BLUETOOTH” to reconnect the

Bluetooth device.

Out of Range or Lost Signal

If the music device is out of range (beyond 30 feet) of the unit or if there is something blocking the Bluetooth

signal, the LED light will flash slowly to indicate that the Bluetooth connection with the music device has been

lost.

To avoid a lost connection:

1. Move the music device back into range (within 30 feet), and/or make sure there’s a clear line of sight

between the unit and the Bluetooth device.

2. If the connection is lost, the connection will need to be reestablished. Follow the directions under

“Reconnecting Your Device”.

NFC

To pair the IMW645 with NFC enabled devices, hold your NFC enabled phone directly against the IMW645's

“Wireless Check in for NFC” mark for 2 seconds. Once the pairing is successful, the speaker will make a sound

to confirm. (Some devices may ask for confirmation from the user.)

FAQ: Frequently Asked Questions

1. I am having Bluetooth pairing or connection problems, what do I do?

A.) Make sure your Bluetooth device is turned on and is on the discoverable mode.(blinking blue light denotes

that the speaker is ready to accept connections)

B.) Make sure your speaker is not already connected with another device (easiest way to determine this is if

you see a steady blue light in the center of the speaker).

C.)If you want to connect with another device , disconnect (you don’t need to unpair) the previously connected

device (you will see the solid blue light in the center of the speaker change to a blinking blue pattern - it’s now

ready to accept connections) and try pairing again.

D.) If you had already paired your device and connection was successful prior but now your connection is

failing or getting a connection error, unpair /forget device (for IOS devices) from your phone or mp3 player and

pair again. Now try to connect.

E.) If you are pairing the first device to the speaker, after you turn on the speaker and when you see a steady

blinking blue light , select IMW645 from the list of discovered Bluetooth devices to pair. If prompted for a

password/pass code enter “0000”.

F.) When you are turning ON the speaker for the first time it automatically tries to connect to the last paired

device, if it cannot find the last paired device and you have paired multiple devices it will try to establish

connection with the previously paired devices. If none of the paired devices are available to connect it will turn

to a discoverable mode and this can take from 5 to 90 seconds (depending upon the number of previously

paired devices and their operating system). If you are trying to establish a connection during this time you will

receive an error. Kindly wait for approximately 90 seconds, scan your MP3 player or phone to discover new

devices in the Bluetooth manager screen of your device and select IMW645 from that list to pair. If prompted

for a password/pass code enter “0000”.

G.) For android devices after unpairing the speaker it may show up on the available devices. This could

happen even if the speaker is turned OFF. If you trying to pair again – please make sure your speaker is

turned ON (We recommend having your android device close to the speaker), wait for few seconds till you see

the blue light blinking (center front of the speaker) and allow 90 seconds for the speaker to establish that no

other device is available for connection. Turn on Bluetooth on your phone/player. Click on “Scan” for Bluetooth

devices from your phone/player to discover IMW645.Now click on IMW645 to connect.

H.) Please note this speaker can be paired with up to 8 devices and will establish automatic connection to

these devices. If you’re trying to pair with more than 8 devices, it will pair but you may have issues connecting

to the initially paired devices. Please unpair / forget device (for IOS devices) and pair again the device you

wish to add and establish connection.

2. My Speaker does not turn ON, what do I do?

A) Please make sure you have charged your speakers. A steady red light in the center of the speaker means

that the speaker is charging. Blinking red light means low power. We recommend you charge for a minimum of

4 hours after each usage.

3. How do I extend my battery life?

A.)The battery life is usually 10 hours at moderate listening levels (60% volume). To ensure you get the

maximum out of the battery we recommend that you fully charge your speaker before using. We also

recommend that you use only the provided power supply unit that came in the box.

4. How do I pause my music or advance to the next or previous track?

A.) You must use your Bluetooth audio source, i.e. MP3 player, smart phone, tablet, etc. in order to control the

track being played.

Warning

When using your speaker please follow these important safety precautions:

1) DO NOT use this product near or in water.

2) DO NOT use this product outdoors when it’s raining.

3) DO NOT clean with a wet cloth.

4) DO NOT USE the product near a heat source or expose to direct sunlight for an extended period of

time.

5) Use only the approved power supply unit provided in the box.

6) DO NOT leave the product plugged to the main AC power when not used for an extended period of

time.

7) Make sure the product is near a main power supply outlet and you can access the power breaker

switch.

WARNING: To reduce the risk of fire or electrical shock, do not expose this device to rain or moisture or place

it near a heat source.

Technical Support

For technical support issues please visit our website at www.alteclansing.com. You can find manuals,

software and FAQ’s at the website. Can’t find what you are looking for? Fill out an online ticket and one of our

technical support team members will answer questions or call 1-855-292-4087 to access our technical support

information on the phone.

Inhaltsverzeichnis

Andere Altec Sprecher Handbücher

Altec

Altec imw855 Bedienungsanleitung

Altec

Altec 168A PAGING HORN Bedienungsanleitung

Altec

Altec CQL1413-B Bedienungsanleitung

Altec

Altec SOUNDBLADE IMW545 Bedienungsanleitung

Altec

Altec 417-8H LF SPEAKER Bedienungsanleitung

Altec

Altec 291-16A HF DRIVER Bedienungsanleitung

Altec

Altec 409-8C CEILING SPEAKER Bedienungsanleitung

Altec

Altec IMW385 Bedienungsanleitung

Altec

Altec 619-8A CEILING SPEAKER Bedienungsanleitung

Altec

Altec IMW575 Bedienungsanleitung

Altec

Altec 288-16G HF DRIVERS Bedienungsanleitung

Altec

Altec 19 Walnut Bedienungsanleitung

Altec

Altec 403T CEILING SPEAKER Bedienungsanleitung

Altec

Altec IMW455 Bedienungsanleitung

Altec

Altec SOLOJACKET IMW375 Bedienungsanleitung

Altec

Altec 290-4G HF DRIVER Bedienungsanleitung

Altec

Altec 411-8A LF SPEAKER Bedienungsanleitung

Altec

Altec inAir MA5000 Bedienungsanleitung

Altec

Altec iMW725 Bedienungsanleitung

Altec

Altec 419-8B LF SPEAKER Bedienungsanleitung

Altec

Altec 604E DUPLEX SPEAKER Bedienungsanleitung

Altec

Altec 731A HF DRIVER Bedienungsanleitung

Altec

Altec AL-SND05X-001/MUSEO Bedienungsanleitung

Altec

Altec 405T CEILING SPEAKER Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung