Altera DSP Development Kit Bedienungsanleitung

101 Innovation Drive

San Jose, CA 95134

(408) 544-7000

www.altera.com

DSP Development Kit, Stratix II Edition

Getting Started User Guide

Development Kit Version: 1.1.0

Document Version: 1.1.0

Document Date: May 2005

P25-10535-01

ignations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and

service marks of Altera Corporation in the U.S. and other countries. All other product or service names are the property of their respective holders. Al-

tera products are protected under numerous U.S. and foreign patents and pending applications, maskwork rights, and copyrights. Altera warrants

performance of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make

changes to any products and services at any time without notice. Altera assumes no responsibility or liability arising out of the ap-

plication or use of any information, product, or service described herein except as expressly agreed to in writing by Altera

Corporation. Altera customers are advised to obtain the latest version of device specifications before relying on any published in-

formation and before placing orders for products or services.

ii Development Kit Version 1.1.0 Altera Corporation

DSP Development Kit, Stratix II Edition Getting Started User GuidePreliminary May 2005

UG-S29804.1.1

Altera Corporation Development Kit Version 1.1.0 iii

May 2005 DSP Development Kit, Stratix II Edition Getting Started User Guide

Contents

About this User Guide

Revision History ........................................................................................................................................ v

How to Contact Altera .............................................................................................................................. v

Typographic Conventions ...................................................................................................................... vi

Chapter 1. About this Kit

Features ................................................................................................................................................... 1–1

Chapter 2. Getting Started

System Requirements ............................................................................................................................ 2–1

DSP Development Kit, Stratix II Edition Contents ...................................................................... 2–1

Inspect the Board .............................................................................................................................. 2–1

Software Requirements ................................................................................................................... 2–2

Quartus II System Requirements ................................................................................................... 2–2

Software Installation ............................................................................................................................. 2–3

Installing the Quartus II Software and MegaCore Functions .................................................... 2–3

Installing The MathWorks MATLAB/Simulink CD-ROM ........................................................ 2–3

Install DSP Builder ........................................................................................................................... 2–4

Installing the Nios II Embedded Processor .................................................................................. 2–5

Installing the Reference Designs and Lab ..................................................................................... 2–6

Set Up Licensing .................................................................................................................................... 2–7

Connect the Cables to the Board & PC ............................................................................................... 2–8

USB Blaster Cable ............................................................................................................................. 2–8

SMA Cable ......................................................................................................................................... 2–9

SLP-50 Anti-Aliasing Filter ........................................................................................................... 2–10

Power Supply Cable ....................................................................................................................... 2–10

Using the Reference Designs & Labs ................................................................................................ 2–11

Unused Pins In Your Designs ............................................................................................................ 2–11

Testing the Board Using the Factory Design ................................................................................... 2–13

Testing LEDs and Push-button Switches .................................................................................... 2–14

Performing the A/D and D/A Converter Performance Test .................................................. 2–14

iv Development Kit Version 1.1.0 Altera Corporation

DSP Development Kit, Stratix II Edition Getting Started User Guide May 2005

Contents

Altera Corporation Development Kit Version 1.1.0 v

May 2005 DSP Development Kit, Stratix II Edition Getting Started User Guide

About this User Guide

Revision History The table below displays the revision history for chapters in this user

guide.

fRefer to the readme file on the DSP Development Kit, Stratix II Edition

Version 1.1.0 CD-ROM for late-breaking information that is not available

in this user guide.

How to Contact

Altera

For technical support or other information about Altera products, go to

the Altera world-wide web site at www.altera.com. You can also contact

Altera through your local sales representative or any of the sources listed

below.

Chapter Date Version Changes Made

All October 2004 1.0.0 First release of User Guide

All May 2005 1.1.0 Updated for Quartus II Release 5.0

Information Type USA & Canada All Other Locations

Technical support www.altera.com/mysupport/ www.altera.com/mysupport/

800-800-EPLD (3753)

7:00 a.m. to 5:00 p.m. Pacific Time

+1 408-544-8767

7:00 a.m. to 5:00 p.m. (GMT -8:00)

Pacific Time

Product literature www.altera.com www.altera.com

Altera literature services [email protected] [email protected]

Non-technical customer

service

800-767-3753 + 1 408-544-7000

7:00 a.m. to 5:00 p.m. (GMT -8:00)

Pacific Time

FTP site ftp.altera.com ftp.altera.com

vi Development Kit Version 1.1.0 Altera Corporation

DSP Development Kit, Stratix II Edition Getting Started User Guide May 2005

Typographic Conventions

Typographic

Conventions

This document uses the typographic conventions shown below.

Visual Cue Meaning

Bold Type with Initial

Capital Letters

Command names, dialog box titles, checkbox options, and dialog box options are

shown in bold, initial capital letters. Example: Save As dialog box.

bold type External timing parameters, directory names, project names, disk drive names,

filenames, filename extensions, and software utility names are shown in bold

type. Examples: fMAX, \qdesigns directory, d: drive, chiptrip.gdf file.

Italic Type with Initial Capital

Letters

Document titles are shown in italic type with initial capital letters. Example: AN 75:

High-Speed Board Design.

Italic type Internal timing parameters and variables are shown in italic type.

Examples: tPIA, n+ 1.

Variable names are enclosed in angle brackets (< >) and shown in italic type.

Example: <file name>, <project name>.pof file.

Initial Capital Letters Keyboard keys and menu names are shown with initial capital letters. Examples:

Delete key, the Options menu.

“Subheading Title” References to sections within a document and titles of on-line help topics are

shown in quotation marks. Example: “Typographic Conventions.”

Courier type Signal and port names are shown in lowercase Courier type. Examples: data1,

tdi, input. Active-low signals are denoted by suffix n, e.g., resetn.

Anything that must be typed exactly as it appears is shown in Courier type. For

example: c:\qdesigns\tutorial\chiptrip.gdf. Also, sections of an

actual file, such as a Report File, references to parts of files (e.g., the AHDL

keyword SUBDESIGN), as well as logic function names (e.g., TRI) are shown in

Courier.

1., 2., 3., and

a., b., c., etc.

Numbered steps are used in a list of items when the sequence of the items is

important, such as the steps listed in a procedure.

■●•Bullets are used in a list of items when the sequence of the items is not important.

vThe checkmark indicates a procedure that consists of one step only.

1The hand points to information that requires special attention.

cThe caution indicates required information that needs special consideration and

understanding and should be read prior to starting or continuing with the

procedure or process.

wThe warning indicates information that should be read prior to starting or

continuing the procedure or processes

rThe angled arrow indicates you should press the Enter key.

fThe feet direct you to more information on a particular topic.

Altera Corporation Development Kit Version 1.1.0 1–1

May 2005 Preliminary

Chapter 1. About this Kit

The DSP Development Kit, Stratix®II Edition provides everything you

need to develop complete system-on-a-programmable-chip (SOPC)

solutions. This document describes how to install the software provided

with the kit, how to connect the Stratix II EP2S60 DSP development board

to your PC, and how to test the board.

Features The DSP development kit includes:

■The Stratix II EP2S60 DSP development board—a prototyping platform

that allows you to develop high-performance DSP designs. Key

features of the board include a Stratix II EP2S60 device, high-speed

analog-to-digital (A/D) and digital-to-analog (D/A) converters, and

connectors for Texas Instruments and Analog Devices evaluation

boards. Refer to the Stratix II EP2S60 Development Board Data Sheet for

specific information about the components and interfaces included

on the board.

■DSP Builder—DSP system design in Altera®devices requires both

high-level algorithms and hardware description language (HDL)

development tools. Altera’s DSP Builder is a system-level DSP

design tool that provides an interface between the MathWorks

MATLAB/Simulink software and the Altera Quartus®II software.

DSP Builder integrates these tools by combining the algorithm

development, simulation, and verification capabilities of the

MATLAB/Simulink system-level design tools with Altera’s HDL

synthesis, simulation, and place-and-route tools. DSP Builder

shortens DSP design cycles by helping you create the hardware

realization of a DSP design in an algorithm-friendly development

environment, allowing system, algorithm, and hardware designers

to share a common development platform. Refer to the DSP Builder

User Guide for more information.

1The DSP Builder software license included with the DSP

Development Kit, Stratix II Edition is a perpetual license

with free software upgrades for the first 12 months. After 12

months, you must purchase a renewal subscription for

access to future software upgrades. For more information,

refer to the Altera web site at www.altera.com.

1–2 Development Kit Version 1.1.0 Altera Corporation

DSP Development Kit, Stratix II Edition Getting Started User Guide May 2005

Features

■Quartus II Software, Development Kit Edition (DKE)—The Quartus II

software provides a comprehensive environment for SOPC design.

The Quartus II software integrates into nearly any design

environment, with interfaces to industry-standard EDA tools.

1The Quartus II DKE software license allows you to use the

product for 12 months. After 12 months, you must upgrade

to a Fixed PC or FloatNet subscription to continue using the

software. For more information, refer to the Altera web site

at www.altera.com.

■IP MegaCore®Library version 5.0 CD-ROM—This CD-ROM contains

Altera IP MegaCore functions, including DSP MegaCore functions.

You can evaluate the MegaCore functions using the OpenCore®Plus

feature, which allows you to:

●Simulate the behavior of a MegaCore function within your

system

●Verify the functionality of your design, as well as quickly and

easily evaluate its size and speed

●Generate time-limited device programming files for designs that

include MegaCore functions which allow you to program a

device and verify your design in hardware

You only need to purchase a license for a MegaCore function when

you are completely satisfied with its functionality and performance,

and want to take your design to production.

1The OpenCore Plus hardware evaluation feature is an

evaluation tool for prototyping only. You must purchase a

license to use an Altera IP MegaCore function in production

designs.

■Nios®II Embedded Processor Windows Evaluation version 5.0

CD-ROM—This CD-ROM contains the following:

●The Nios II CPU Component for SOPC Builder—The CPU

component provides three processor IP functions for the SOPC

Builder hardware component library. The CPU component is

required by SOPC Builder to generate the hardware and system

descriptions.

●Nios II IDE—An integrated platform for embedded software

development including multiple run configurations and project

management.

Altera Corporation Development Kit Version 1.1.0 1–3

May 2005 DSP Development Kit, Stratix II Edition Getting Started

About this Kit

■MathWorks MATLAB and Simulink CD-ROM Release 14 with Service

Pack 2 (R14SP2)—This CD-ROM contains 3rd party tools that are

used in conjunction with DSP Builder as part of Altera's DSP

development flow. MATLAB is a high-level technical computing

language environment for algorithm development, data

visualization, data analysis, and numerical computation. Simulink

provides an interactive graphical environment and a customizable

set of block libraries that let you accurately design, simulate,

implement, and test signal processing systems.

1A 30-day license for MATLAB/Simulink is included as part

of the DSP Development Kit, Stratix II Edition. To obtain the

personal license password and for more information, please

visit the MathWorks at: www.mathworks.com/products

/connections/trials/altera.shtml.

■DSP Development Kit, Stratix II Edition Version 1.1.0 CD-ROM—This

CD-ROM includes several reference designs and labs to help you get

started building applications, as well as documentation, board

schematics, the Stratix II EP2S60 DSP Development Board Data Sheet,

and this user guide. Refer to “Using the Reference Designs & Labs”

on page 2–11 for more information.

1–4 Development Kit Version 1.1.0 Altera Corporation

DSP Development Kit, Stratix II Edition Getting Started User Guide May 2005

Features

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Altera Mikrocontroller Handbücher

Altera

Altera MAX II Micro Kit Bedienungsanleitung

Altera

Altera Cyclone V GX Starter Kit Bedienungsanleitung

Altera

Altera MAX 10 series Bedienungsanleitung

Altera

Altera APEX Bedienungsanleitung

Altera

Altera Cyclone V SoC Bedienungsanleitung

Altera

Altera Stratix V GX Edition Bedienungsanleitung

Altera

Altera Nios II Bedienungsanleitung

Altera

Altera CPLD Bedienungsanleitung

Altera

Altera Max II Bedienungsanleitung

Altera

Altera Max10 FPGA Bedienungsanleitung

Altera

Altera Arria II GX FPGA Bedienungsanleitung

Altera

Altera DE5-NET Bedienungsanleitung

Altera

Altera DE1-SoC Bedienungsanleitung

Altera

Altera Stratix IV GT Edition Bedienungsanleitung

Altera

Altera Stratix V GX Edition Bedienungsanleitung

Altera

Altera Excalibur APEX 20K200E Bedienungsanleitung

Altera

Altera MAX 10 series Bedienungsanleitung

Altera

Altera Arria 10 GX Bedienungsanleitung

Altera

Altera Arria 10 FPGA Bedienungsanleitung

Altera

Altera Stratix III Bedienungsanleitung

Altera

Altera Stratix V GX 100G Bedienungsanleitung

Altera

Altera Cyclone III Bedienungsanleitung

Altera

Altera Arria 10 SoC Bedienungsanleitung

Altera

Altera Arria V GX FPGA Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung