Altimium MATF32 Bedienungsanleitung
MATF32
Single Plug-in Card Matrix Switcher
All Rights Reserved
Version: 2017V1.3
User Manual
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual is for reference only, different model and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till May 2017. Any changes of functions
and parameters since then will be informed separately. Please refer to the dealers for
the latest details.
All product function is valid till 2017-5-15.
Trademarks
Product model and its logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
Contents
1. Introduction ................................................................................................................. 1
1.1 Introduction to Single Plug-in Card Matrix Switcher ........................................... 1
1.2 Features ............................................................................................................ 1
1.3 Package List ...................................................................................................... 1
2. Panel Description ........................................................................................................ 3
2.1 Front Panel ........................................................................................................ 3
2.2 Rear Panel ......................................................................................................... 5
2.3 Signal Cards ...................................................................................................... 6
2.3.1 I-UH& O-UH ............................................................................................. 6
2.3.2 I-BT& O-BT .............................................................................................. 7
2.3.3 I-UV ......................................................................................................... 8
2.3.4 O-AU ..................................................................................................... 10
3. System Connection ................................................................................................... 11
3.1 Usage Precautions .......................................................................................... 11
3.2 System Diagram .............................................................................................. 11
3.3 Connection Procedures ................................................................................... 12
3.4 Application ....................................................................................................... 12
4. Front Panel Control ................................................................................................... 13
4.1 Switching I/O connection ................................................................................. 13
4.2 EDID Learning ................................................................................................. 13
4.3 Inquiry .............................................................................................................. 14
4.4 Clear operation ................................................................................................ 14
5. RS232 Control .......................................................................................................... 15
5.1 RS232 Control Software .................................................................................. 15
5.2 RS232 Communication Commands ................................................................ 17
6. TCP/IP Control .......................................................................................................... 28
6.1 Control Modes ................................................................................................. 28
6.2 Control via TCP/IP communication software ................................................... 29
6.3 Control via web-based GUI.............................................................................. 30
6.3.1 Switch Control ....................................................................................... 34
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
6.3.1.1. Scene Switch .............................................................................. 34
6.3.1.2. I/O Switch ................................................................................... 34
6.3.2 System Setting ...................................................................................... 35
6.3.2.1. Configuration .............................................................................. 35
6.3.2.2. Status ......................................................................................... 38
6.3.2.3. EDID ........................................................................................... 40
6.3.2.4. Password .................................................................................... 40
6.4 Port Management ............................................................................................ 41
7. Firmware Upgrade .................................................................................................... 42
8. Specification ............................................................................................................. 43
8.1 Main Unit ......................................................................................................... 43
8.2 Signal Cards .................................................................................................... 43
8.2.1 I-UH& O-UH ........................................................................................... 43
8.2.2 I-BT& O-BT ............................................................................................ 44
8.2.3 I-UV ....................................................................................................... 44
8.2.4 O-AU ..................................................................................................... 45
9. Panel Drawing .......................................................................................................... 46
10. Troubleshooting & Maintenance ............................................................................. 47
11. After-sales Service .................................................................................................. 48
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
1
1. Introduction
1.1 Introduction to Single Plug-in Card Matrix Switcher
This product is a high-performance seamlessly AV modular matrix switcher providing 24
flexible PCIE slots for single HDMI/HDBaseT/VGA input/ output cards and 8 fixed slots
for output signal cards.
With its advanced modularization design, Freedom combination of single
HDBaseT/HDMI/VGA input/output card can make up different kinds of matrix. All the
cards support plug-and-play. It supports different video signals with seamless cross
switching. Every video or audio signal is transmitted and switched independently to
decrease signal attenuation. The switcher can handle all the audiovisual management,
including the switching, driving, scaling etc.
1.2 Features
▪ 24 card slots for flexible input/ output combination, and 8 slots for output signal
cards.
▪ Comprehensive signal card compatibility: HDMI/HDBaseT/VGA.
▪ Automatically recognize input/ output signal card.
▪ Powerful EDID management.
▪ UPnP enables quick-connection to GUI.
▪ HDCP Compliant.
▪ Seamless AV distribution through different AV signal.
▪ Controllable via front panel buttons, IR, RS232 & TCP/IP.
▪ Adjustable output resolution.
▪ Online firmware upgrade via USB port.
1.3 Package List
▪ 1 x Single Plug-in Card Matrix
Switcher
▪ 1 x Power Cord
▪ 2 x Mounting ears with 4 Screws
▪ 4 x Plastic Cushions
▪ 1 x RS232 Cable
▪ 1 x User Manual
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
2
Signal cards are sold and packed separately, all the items listed above are for
the Matrix Switcher solely. Confirm all the accessories are included, if not, please
contact with the dealers.
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
3
2. Panel Description
2.1 Front Panel
No.
Name
Description
Description
for Touch
Screen
▪ Touch any button to awake touch screen and white backlight
will appear. If without any operations within 8 seconds, touch
screen will enter sleep mode and the white backlight will
goes out.
Note: Due to the buttons may not be able to touch successfully;
the touch screen will not be awakened. In this case, please refer
to the shown below to slide your finger left and right.
▪ When the touch screen is awaking, press any button, the
white backlight of this buttons will turn into blue.
▪ Press the button of IR remote, the corresponding button will
PWR
ACT
IR
INP UT 1 2 3456 7 8
1 2 3456 7 8
9 0
9 0 CLE AR E NTE R
EDI DALL
136
4
278
5
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
4
appear blue backlight.
①
LCD screen
Display real-time operation status.
②
FIRMWARE
Micro USB port, used for firmware update.
③
PWR
Power indicator:
▪ OFF: No power.
▪ RED: Normal work.
▪ Green: Standby.
④
ACT
RS232 Link indicator:
OFF: No RS232 serial signal.
Blinking Green: Transmit RS232 serial signal.
⑤
IR
IR indicator:
▪ OFF: No IR signal.
▪ Blinking red: when the built-in IR sensor receive IR signal.
⑥
INPUTS
Back-lit buttons for input selection, ranges from 0~9, 24 selectable
channels in total.
⑦
OUTPUTS
Back-lit buttons for output selection, ranges from 0 ~ 9, 32
selectable channels in total.
⑦
MENU
ALL: Select all inputs/ outputs.
EDID: EDID management button, enable input port to learn the
EDID data from output devices.
CLEAR: Withdraw an operation before it comes into effect/ exit
inquiry mode.
ENTER: confirm operation/ long-press (3s or more) to enter
inquiry mode.
▪ Input/ output channels are recognized as double-digit, so press channel 1~9 as
01~09, besides, the interval should not exceed 8s.
▪ Operations will be automatically canceled 8s later unless pressing ENTER to
confirm.
Single Plug-in Card Matrix Switcher
Altimium www.altimium.com
5
2.2 Rear Panel
No.
Name
Description
①
1~24
Card Slots
Flexible card slots, 24 in total, insert input/ output signal cards here.
②
25~32
Card Slots
8 in total, insert output signal cards here.
③
RS232
Serial control port, connect with the RS232 port of control device to
control the Matrix Switcher or the third-party device connected to I-
BT &O-BT.
IR ALL IN
Input port for IR control signal, connect with IR receiver (5V, with
carrier), and work with IR emitters connected to IR OUT of far-end
HDBT receivers.
IR EYE
Connect with IR receiver (5V, with carrier) to control the switcher.
④
TCP/IP
TCP/IP control port, connect with control device (e.g. a PC).
⑤
Power port
Connect with 100~240V AC outlet.
⑥
Ground
Connect to grounding.
Pictures shown in this manual are only for reference.
RS2 32
TCP /IP
IR EY E
ALL IN
IR
1 2 3456 7 8 9 10
11 12 13 14 15 16 17 18 19 20 21 22 23 24
POW ER
RS23 2
AC1 00 V-2 40V
12
3 4 5
6
Inhaltsverzeichnis
Andere Altimium Matrix-Umschalter Handbücher
Altimium
Altimium MATF12 Bedienungsanleitung
Altimium
Altimium MAT.HDBT44-4K Bedienungsanleitung
Altimium
Altimium MATM88AN Bedienungsanleitung
Altimium
Altimium MATM1616 Bedienungsanleitung
Altimium
Altimium MAT.HDMI88-4K Bedienungsanleitung
Altimium
Altimium MATF16 Bedienungsanleitung
Altimium
Altimium MAT.HDMI44-4K Bedienungsanleitung
Altimium
Altimium MAT.HDBT66-4K Bedienungsanleitung
