Altronics T1KE3F4 Bedienungsanleitung

T1KE3F4

4 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove1 enclosure with TLU1 backplane

- One (1) eFlow6NB - Power Supply/Charger

- One (1) ACM4 - Fused Access Power Controller

T1KE3F8

8 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove1 enclosure with TLU1 backplane

- One (1) eFlow6NB - Power Supply/Charger

- Two (2) ACM4 - Fused Access Power Controllers

T2KE33F16

16 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove2 enclosure with TLU2 backplane

- Two (2) eFlow6NB - Power Supply/Charger

- Two (2) ACM8 - Fused Access Power Controllers

T1KE3F4D

4 Door Kit with PTC Outputs

Fully assembled kit includes:

- Trove1 enclosure with TLU1 backplane

- One (1) eFlow6NB - Power Supply/Charger

- One (1) ACM4CB - PTC Access Power Controller

T1KE3F8D

8 Door Kit with PTC Outputs

Fully assembled kit includes:

- Trove1 enclosure with TLU1 backplane

- One (1) eFlow6NB - Power Supply/Charger

- Two (2) ACM4CB - PTC Access Power Controllers

T2KE33F16D

16 Door Kit with PTC Outputs

Fully assembled kit includes:

- Trove2 enclosure with TLU2 backplane

- Two (2) eFlow6NB - Power Supply/Charger

- Two (2) ACM8CB - PTC Access Power Controllers

Altronix/Kisi Kits

Models Include:

Installation Guide

All components of these Trove kits are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

Access & Power Integration

Rev. 111722

Installing Company: _________________________ Service Rep. Name: __________________________________________

Address: _________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners. More than just power.™

- 2 - Trove KE eFlow Kits Installation Guide

Overview:

Altronix Trove Kisi kits are pre-assembled and consist of Trove1LU1 or Trove2LU2 enclosure/backplane with factory installed Altronix power

supply/charger(s) and sub-assemblies. Trove Kisi kits also accommodates up to four (4) Kisi Pro Controllers for up to sixteen (16) doors in a

single enclosure.

Configuration Chart:

Altronix

Model

Number

120VAC

60Hz

Input

Current

(A)

Power

Supply

Board

Input

Fuse

Rating

Power

Supply

Board

Battery

Fuse

Rating

Maximum Supply

Current for Main and Aux.

Outputs on Power Supply

board(s) and ACM4/ACM8

Access Power Controllers’

outputs

Nominal DC

Output Voltage

Fail-Safe/

Fail-Secure

Outputs

ACM4(CB)/

ACM8(CB)

Board

Input

Fuse

Rating

ACM4/

ACM8

Board

Output

Fuse

Rating

ACM4CB/

ACM8CB

Board

Output

PTC

Rating

[DC] [Aux]

Output

Range

(VDC)

Output

Range

(VDC)

T1KE3F4

3.5 5A/

250V

10A/

32V 24VDC @ 5.7A 20.17-

26.4

20.28-

26.4

4 10A/32V 3A/32V –

T1KE3F4D – 2.5A

T1KE3F8 8 10A/32V 3A/32V –

T1KE3F8D – 2.5A

T2KE33F16 16 10A/250V 3.5A/250V –

T2KE33F16D – 2.5A

Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having juris-

diction. Product is intended for indoor use only.

1. Remove backplane from enclosure. Do not discard hardware.

2. Mark and predrill holes in the wall to line up with the top two/three keyholes in the enclosure. Install two/three upper fasteners

and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the two/three upper

screws, level and secure. Mark the position of the lower two/three holes. Remove the enclosure. Drill the lower holes and

install the two/three fasteners. Place the enclosure’s upper keyholes over the two/three upper screws. Install the two/three lower

screws and make sure to tighten all screws refer to pages 6-7.

3. Mount included UL Listed tamper switch (Altronix Model TS112 or equivalent)

in desired location, opposite hinge. Slide the tamper switch bracket onto the edge

of the enclosure, approximately 2” from the right side (Fig. 1, pg. 2).

Connect tamper switch wiring to the Access Control Panel input or the

appropriate UL Listed reporting device. To activate alarm signal

open the door of the enclosure.

4. Mount Kisi Pro Controllers to TLU1 or TLU2 backplane, refer to pages 3-5.

5. Refer to the eFlow Power Supply/Charger Installation Guide for eFlow6NB

and corresponding Sub-Assembly Installation Guides for ACM4(CB) and ACM8(CB) for

further installation instructions.

Hardware:

Fig. 1

Tamper Switch

(included)

To Access Control Panel or

UL Listed Reporting Device

Edge of

Enclosure

Spacer | 5/16” Pan Head Screw | Mounting Magnet

Trove KE eFlow Kits Installation Guide - 3 -

T1KE3F4 and T1KE3F4D: Configuration of Kisi Pro Controllers:

1. Fasten mounting magnets (provided) to Kisi Pro Controllers with screws and spacers (provided) using the controllers’ mounting holes

(Fig. 2, pg. 3).

2. Attach mounting magnets to TLU1 in the approximate position as shown below (Fig. 2a, pg. 3).

Note: Kisi Pro Controllers should be properly oriented.

Please make sure that they are mounted correctly, as shown in Fig. 2 below.

3. Fasten TLU1 backplane to Trove1 enclosure utilizing hardware (provided).

Access Controller Position Chart for the Following Models:

Kisi Pem Mounting

Pro Controller A

Fig. 2 - T1KE3F4(D) Conﬁguration

TRG

TRIGGER

INPUT

ACM4

ACCESS POWER

CONTROLLER

LED1 LED2 LED3 LED4

MAIN

OUTPUT 1

NC C NO COM NC C NO COM NC C NO COM NC C NO COM

OUTPUT 2 OUTPUT 3

IN GND

OUTPUT 4

-- +

CONTROL

-- +

POWER

+INP- T +RET-

INTERFACE

NO C NC

FACP

Altronix ACM4(CB)

Altronix

eFlow6NB

NC C NO NC C NO

AC FAIL BAT FAIL

TRIGGER

AC DCAC1

EOL NO GND

SUPERVISED RESET

+AUX-

- BAT +-DC +

L G N

OFF - 24V

ON - 12V

Spacer

Backplane

Access

Controller

Pan Head

Screw

Pan Head

Screw

Mounting

Magnet

Fig. 2a

- 4 - Trove KE eFlow Kits Installation Guide

T1KE3F8 and T1KE3F8D: Configuration of Kisi Pro Controllers:

1. Fasten mounting magnets (provided) to Kisi Pro Controllers with screws and spacers (provided) using the controllers’ mounting holes

(Fig. 3, pg. 4).

2. Attach mounting magnets to TLU1 in the approximate position as shown below (Fig. 3a, pg. 4).

Note: Kisi Pro Controllers should be properly oriented.

Please make sure that they are mounted correctly, as shown in Fig. 3 below.

3. Fasten TLU1 backplane to Trove1 enclosure utilizing hardware (provided).

Access Controller Position Chart for the Following Models:

Kisi Pem Mounting

Pro Controller A

Fig. 3 - T1KE3F8(D) Conﬁguration

Spacer

Backplane

Access

Controller

Pan Head

Screw

Pan Head

Screw

Mounting

Magnet

Fig. 3a

Altronix

eFlow6NB

TRG

TRIGGER

INPUT

ACM4

ACCESS POWER

CONTROLLER

LED1 LED2 LED3 LED4

MAIN

OUTPUT 1

NC C NO COM NC C NO COM NC C NO COM NC C NO COM

OUTPUT 2 OUTPUT 3

IN GND

OUTPUT 4

-- +

CONTROL

-- +

POWER

+INP- T +RET-

INTERFACE

NO C NC

FACP

TRG

TRIGGER

INPUT

ACM4

ACCESS POWER

CONTROLLER

LED1 LED2 LED3 LED4

MAIN

OUTPUT 1

NC C NO COM NC C NO COM NC C NO COM NC C NO COM

OUTPUT 2 OUTPUT 3

IN GND

OUTPUT 4

-- +

CONTROL

-- +

POWER

+INP- T +RET-

INTERFACE

NO C NC

FACP

Altronix ACM4(CB)

NC C NO NC C NO

AC FAIL BAT FAIL

TRIGGER

AC DCAC1

EOL NO GND

SUPERVISED RESET

+AUX-

- BAT +-DC +

L G N

OFF - 24V

ON - 12V

Trove KE eFlow Kits Installation Guide - 5 -

T2KE33F16 and T2KE33F16D: Configuration of Kisi Pro Controllers:

1. Fasten mounting magnets (provided) to Kisi Pro Controllers with screws and spacers (provided) using the controllers’ mounting holes

(Fig. 4, pg. 5).

2. Attach mounting magnets to TLU2 in the approximate position as shown below (Fig. 4a, pg. 5).

Note: Kisi Pro Controllers should be properly oriented.

Please make sure that they are mounted correctly, as shown in Fig. 4 below.

3. Fasten TLU2 backplane to Trove2 enclosure utilizing hardware (provided).

Access Controller Position Chart for the Following Models:

Kisi Pem Mounting

Pro Controller A

Fig. 4 - T2KE33F16(D) Conﬁguration

Spacer

Backplane

Access

Controller

Pan Head

Screw

Pan Head

Screw

Mounting

Magnet

Fig. 4a

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

TRG

FACP

1 2 3 4

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

TRG

FACP

1 2 3 4

Altronix ACM8(CB)

NC C NO NC C NO

AC FAIL BATFAIL

TRIGGER

AC DCAC1

EOLNOGND

SUPERVISED RESET

+AUX-

- BAT +-DC +

L G N

OFF - 24V

ON - 12V

Altronix eFlow6NB

NC C NO NC C NO

AC FAIL BATFAIL

TRIGGER

AC DCAC1

EOLNOGND

SUPERVISED RESET

+AUX-

- BAT +-DC +

L G N

OFF - 24V

ON - 12V

Altronix eFlow6NB

- 6 - Trove KE eFlow Kits Installation Guide

T1KE3F4(D) and T1KE3F8(D) Enclosure Dimensions (H x W x D approximate):

18” x 14.5” x 4.625” (457mm x 368mm x 118mm)

4.5” (114.3mm) 4.5” (114.3mm) 2.75”

(69.9mm)

1.115” (28.3mm)

1.36” (34.5mm)

1.25” (31.8mm) 1.25” (31.8mm)

1.5” (38.1mm)

8.5” (215.9mm)6.5” (165.1mm)

1.5” (38.1mm)

8.5” (215.9mm)6.5” (165.1mm)

4.5” (114.3mm)

13.0” (330.2mm)

0.6” (15.2mm)

14.5” (321.3mm)

1.45” (36.8mm)

7.25” (184.2mm)

1.95” (49.5mm)

1.1” (27.9mm)

0.6” (15.2mm)

0.57” (14.5mm)

18.0” (457.2mm)

1.25” (31.8mm)

Trove KE eFlow Kits Installation Guide - 7 -

T2KE33F16(D) Enclosure Dimensions (H x W x D approximate):

27.25” x 21.5” x 6.5” (692.2mm x 552.5mm x 165.1mm)

6.75” (171.5mm)8.25” (209.5mm)

8.00” (203.2mm)

2.00” (50.8mm)

1.25” (31.8mm)

5.25” (133.4mm) 5.25” (133.4mm)7.00” (177.8mm)

1.25” (31.8mm)

6.25” (158.8mm) 19.80” (502.9mm)

1.00” (25.4mm)

27” (685.8mm)

1.5”

(38.1mm)

2.00” (50.8mm) 2.00” (50.8mm)

3.5”(88.9mm) 3.5”(88.9mm)

21.50” (546.1mm)

5.25” (133.35mm) 5.25” (133.35mm)

6.25” (158.8mm)

1.25”

(31.8mm)

0.85” (21.6mm)

0.5625” (14.3mm)

2.415” (61.3mm)

0.685” (17.4mm)

1.77”

(45mm)

0.885” (22.5mm)

1.125” (28.3mm)

Knockouts

2.00” (50.8mm) 2.00” (50.8mm)

- 8 - Trove KE eFlow Kits Installation Guide

Altronix is not responsible for any typographical errors.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––