Alula CAM-DB-HS2-AI Technisches Datenblatt
Quick Setup
Power Kit Installation
Doorbell Installation
Doorbell Setup
Get the Alula App
1
Box Contents
Doorbell (x1)
Mounting Plate (x2)
Pick the one for best
surveillance angle.
Plate Foam (x1)
Stabilize the
mounting plate
when installing it on
the rough surface.
Power Kit (x1) Drill Bit (x1) Screwdriver (x1)
Mounting Screw (x3)
Anchor (x3)
Wire Connector (x4)
Security Screw (x1)
Fixing Screw (x2)
Wire Harness (x1)
Fuse Wire (x1) U-shaped Wire (x2)
Tools You May Need
Drill (x1)
2
Basics
Reset Button
MIC
Doorbell
LED Indicator
QR Code
Faceplate Lens
Micro SD Card Slot
(Behind the cover)
Speaker
Terminals
Name Description
LED Indicator Red • Solid Red: Doorbell is starting up.
• Fast-flashing Red: Doorbell exception
(e.g.Micro SD card error).
Blue • Solid Blue: Doorbell is functioning properly.
• Fast-flashing Blue: Doorbell is ready for Wi-
Fi connection.
Micro SD Card
(sold separately)
Initialize the card in the Alula app before using it.
Reset Button
Hold for 5seconds to reset and enter to Wi-Fi configuration
mode.
Get the Alula App
1.1. Connect your mobile phone to Wi-Fi (suggested).Connect your mobile phone to Wi-Fi (suggested).
2.2. Search for “Alula” in App Store or Google PlaySearch for “Alula” in App Store or Google PlayTMTM..
3.3. Download and install the Alula app.Download and install the Alula app.
4.4. Launch the app, and sign into user account.Launch the app, and sign into user account.
3
Wiring Overview
Alula doorbell with chimeAlula doorbell with chime
If you have mechanical chime or electronic chime installed in your home,
install the power kit and doorbell, and connect the wires as shown in the
figure below.
12VAC to 24VAC
12VAC to 24VAC
12VAC to 24VAC
110 to 240VAC
LIVE
NEUTRAL
Transformer
Doorbell
Mechanical Chime / Electronic Chime
Power Kit
Coil of t he
door chime
0
3
Alula doorbell with no chimeAlula doorbell with no chime
If no chime is installed, skip power kit installation, install the doorbell,
and connect the wires as shown in the figure below.
Fuse Wire
12VAC to 24VAC
12VAC to 24VAC
110 to 240VAC
LIVE
NEUTRAL
Doorbell
Transformer
• We recommend installing a new transformer to bring the output 12 to
24 volts.
• Please refer to Quick Start Guide of your chime or transformer for the
chime or transformer installing details.
4
Power Kit Installation
The power kit ensures that your doorbell gets the power it needs, so be
sure to install it before you install your Doorbell.
1Shut off the electricity at the breaker that controls doorbell'sShut off the electricity at the breaker that controls doorbell's
circuit.circuit.
2Insert one end of the wire harness into the power kit.
3Remove the cover from your mechanical chime.
4Remove the existing chime wires in the terminals namedRemove the existing chime wires in the terminals named
TRANS and FRONT.TRANS and FRONT.
TRANSF RONTREAR REAR
5
5Connect the wire harness to the chime's terminals namedConnect the wire harness to the chime's terminals named
TRANS and FRONT.TRANS and FRONT.
6Insert the existing chime wire and the other end of the wireInsert the existing chime wire and the other end of the wire
harness into the wire connector and twist it tightly. Repeatharness into the wire connector and twist it tightly. Repeat
this step with the other chime wire.this step with the other chime wire.
Wire Connector
Wire HarnessChime Wire
7Mount the power kit to the side of the chime.Mount the power kit to the side of the chime.
8Put back the chime cover.Put back the chime cover.
6
Doorbell Installation
Recommended Installation Height: 1.2m (4ft) above the ground.
1Shut off the electricity at the breaker that controls doorbell'sShut off the electricity at the breaker that controls doorbell's
circuit.circuit.
2(Optional)(Optional) When the wall is uneven, paste the plate foam toWhen the wall is uneven, paste the plate foam to
the mounting plate.the mounting plate.
3Using your mounting plate as a template, mark the locationUsing your mounting plate as a template, mark the location
of the two mounting holes on your wall, and insert anchors,of the two mounting holes on your wall, and insert anchors,
then fix the mounting plate to the wall.then fix the mounting plate to the wall.
AnchorMounting Screw
Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).
7
4If you have a chime installed, follow Option A;
If not, follow Option B.
Option A Connect doorbell with your existing doorbell wires.Connect doorbell with your existing doorbell wires.
Power Supply: 12 to 24 VAC
U-Shaped Wire
Fixing Screw
Option B Connect the fuse wire with your existing doorbellConnect the fuse wire with your existing doorbell
wire.wire.
Fuse Wire
Fixing Screw
Power Supply: 12 to 24 VAC
5Install the doorbell to the mounting plate.
8
6Insert the security screw into the top of the mounting plate to
secure the doorbell.
7Restore the electricity at the breaker.
Doorbell is powered on when its indicator flashes blue quickly. If not,
make sure your electricity is off and check the wiring. If yes, proceed to
doorbell setup.
Doorbell Setup
1Add your doorbell to Alula app.
1. Remove the faceplate of the doorbell.
9
2. Log in to your Alula account.
3. In the Cameras tab, tap “+” on the upper-right corner
to go to the Scan QR Code interface.
4. Scan the QR code on the device or the cover of this quick
start guide when the indicator ashes blue.
5. Follow the wizard to add the doorbell to the Alula app.
If you want to change the Wi-Fi which your doorbell has
connected to, press and hold the reset button for 5s and
repeat this part.
6. Put the faceplate back.
2Choose the corresponding chime type.
1. In the Alula app, tap the Chime Type in the Device Settings
interface to go to the Chime Type interface.
2. Choose the chime type which you have installed in your
home.
Andere Alula Gegensprechanlage Handbücher
