ALZA CS-210ES PLUS Bedienungsanleitung

CS-210ES PLUS

Scientific

Calculator

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

English

3 –47

Čeština

48 –91

Slovenčina

92 –137

Magyar

138 –186

Deutsch

197 –234

Dear customer,

Thank you for purchasing our product. Please read the following

instructions carefully before first use and keep this user manual for

future reference. Pay particular attention to the safety instructions. If

you have any questions or comments about the device, please contact

the customer line.

✉www.alza.co.uk/kontakt

✆+44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00

Praha 7, www.alza.cz

Sample Operations

Sample operations in this manual are indicated by an icon. Unless

specifically stated, all sample operations assume that the calculator is in

its initial default setup. Use the procedure under “Initializing the

Calculator” to return the calculator to its initial default setup.

For information about the , , , and marks that are

shown in the sample operations, see “Configuring the Calculator Setup”.

Initializing the Calculator

Perform the following procedure when you want to initialize the

calculator and return the calculation mode and setup to their initial

default settings. Note that this operation also clears all data currently in

calculator memory.

(CLR) (All) (Yes)

Safety Precautions

Battery

•Keep batteries out of the reach of small children.

•Use only the type of battery specified for this calculator in this

manual.

Handling Precautions

•Even if the calculator is operating normally, replace the battery

at least once every three years (LR03 (AM-4)) or two years (R03

(UM-4)) .

•A dead battery can leak, causing damage to and malfunction

of the calculator.

•Never leave a dead battery in the calculator.

•Do not try using the calculator while the battery is completely

dead .

•The battery that comes with the calculator discharges slightly

during shipment and storage.

•Because of this, it may require replacement sooner than the

normal expected battery life.

•Avoid use and storage of the calculator in areas subjected to

temperature extremes, and large amounts of humidity and

dust.

•Do not subject the calculator to excessive impact, pressure, or

bending.

•Never try to take the calculator apart.

•Whenever discarding the calculator or batteries, be sure to do

so in accordance with the laws and regulations in your

particular area.

Turning Power On and Off

Press to turn on the calculator.

Press (OFF) to turn off the calculator.

Auto Power Off

Your calculator will turn off automatically if you do not perform any

operation for about 10 minutes. If this happens, press the key to

turn the calculator back on.

Adjusting Display Contrast

Display the CONTRAST screen by performing the following key

operation: (SETUP) ( CONT ) Next, use and

to adjust contrast. After the setting is the way you want, press .

Important: If adjusting display contrast does not improve display

readability, it probably means that battery power is low. Replace the

battery.

Key Markings

Pressing the or key followed by a second

alternate function key performs the alternate function of

the second key. The alternate function is indicated by the

text printed above the key.

Alternate

function

Keycap function

sin-1 D

The following shows what the different colors of the alternate function

key text mean.

If key marking text is this

color:

It means this:

Yellow

Press and then the key to

access the applicable function.

Red

Press and then the key to

input the applicable variable,

constant, or symbol.

Reading the Display

The display of the calculator shows expressions you input, calculation

results, and various indicators.

If a indicator appears on the right side of the calculation result, it

means the displayed calculation result continues to the right. Use

and to scroll the calculation result display.

If a indicator appears on the right side of the input expression, it

means the displayed calculation continues to the right. Use and to

scroll the input expression display. Note that if you want to scroll the

input expression while both the and indicators are displayed, you

will need to press first and then use and to scroll.

Indicator

Input

expressions

Calculations result

Display indicators

This indicator:

Means this:

The keypad has been shifted by pressing the key. The

keypad will unshift and this indicator will disappear when

you press a key.

The alpha input mode has been entered by pressing the

key. The alpha input mode will be exited and this

indicator will disappear when you press a key.

There is a value stored in independent memory.

The calculator is standing by for input of a variable name to

assign a value to the variable. This

indicator appears after you press (STO).

The calculator is standing by for input of a variable name to

recall the variable's value. This

indicator appears after you press .

The calculator is in the STAT Mode.

The default angle unit is degrees.

The default angle unit is radians.

The default angle unit is grads.

A fixed number of decimal places is in effect.

A fixed number of significant digits is in effect.

Natural Display is selected as the display format.

Calculation history memory data is available and can be

replayed, or there is more data above/below

the current screen.

The display currently shows an intermediate result of a

multi-statement calculation.

Important: For some type of calculation that takes a long time to

execute, the display may show

only the above indicators (without any value) while it performs the

calculation internally.

Using Menus

Some of the calculator's operations are performed using menus.

Pressing or , for example, will display a menu of applicable

functions. The following are the operations you should use to navigate

between menus.

• You can select a menu item by pressing the number key that

corresponds to the number to its left on the menu screen.

• The indicator in the upper right corner of a menu means there is

another menu below the current one. The indicator means another

menu above. Use and to switch between menus.

• To close a menu without selecting anything, press .

Specifying the Calculation Mode

When you want to perform this

type of operation:

Perform this key operation:

General calculations

(Comp)

Statistical and regression

calculations

(STAT)

Generation of a number table

based on an expression

(TABLE)

Note: The initial default calculation mode is the COMP Mode.

Configuring the Calculator Setup

First perform the following key operation to display the setup menu:

(SETUP). Next, use and and the number keys to

configure the settings you want.

Underlined ( ) settings are initial defaults.

MthIO Linelo Specifies the display format.

Natural Display (MthIO) causes fractions, irrational numbers, and other

expressions to bedisplayed as they are written on paper.

MthIO: Selects Matho or LineO. MathO displays

input and calculation results using the same format as they are written

on paper. Lineo displays input the same way as Matho, but calculation

results are displayed in linear format.

Linear Display (LinelO) causes fractions and other expressions to be

displayed in a single line.

Note: The calculator switches to Linear Display automatically whenever

you enter the STAT Mode.

In this manual, the symbol next to a sample operation indicates

Natural Display (MathO), while The symbol indicates Linear Display.

Inhaltsverzeichnis

Sprachen:

Andere ALZA Kalkulator Handbücher

ALZA

ALZA DK220 Bedienungsanleitung

Beliebte Kalkulator Handbücher anderer Marken

HP 35s Handbuch

Casio

Casio CFX-9970G Bedienungsanleitung

LEXIBOOK

LEXIBOOK EL350 Bedienungsanleitung

HP HP-97 Bedienungsanleitung

Citizen

Citizen SDC-414N Bedienungsanleitung

Casio

Casio fx-3800P Bedienungsanleitung

Canon

Canon P26-DHIII Bedienungsanleitung

Citizen

Citizen 520DPA Bedienungsanleitung

Sharp

Sharp EL-9900 Bedienungsanleitung

Casio

Casio FX-9860GII - SOFTWARE VERSION 2-00 Bedienungsanleitung

Casio

Casio MS-7UC Bedienungsanleitung

Sharp

Sharp WriteView EL-W506 Technisches Handbuch

Casio

Casio fx-CG50 Bedienungsanleitung

HP HP-67 Benutzerhandbuch

Royal

Royal CBC2000 Bedienungsanleitung

Heathkit

Heathkit IC-2009 Bedienungsanleitung

Universal

Universal UNV-15907 Bedienungsanleitung

Sharp

Sharp EL-9650 Bedienungsanleitung