ALZA ID205U Bedienungsanleitung
Smart Bracelet ID205U
USER MANUAL • UŽIVATELSKÁ PŘÍRUČKA •
POUŽÍVATEĽSKÁ PRÍRUČKA •
HASZNÁLATI ÚTMUTATÓ • BENUTZERHANDBUCH
2
English
3 – 16
Čeština
17 – 30
Slovenčina
31 – 44
Magyar
45 – 59
Deutsch
60 – 74
3
The user manual contains product features, instructions for use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference.
Importer: Alza.cz a.s., Jankovcova 1522/53, 170 00 Praha 7, www.alza.cz
Pairing Your Watch
1. Downloading and Installing App
You can set up the watch through the VeryFitPro app for iOS or Android devices. The
steps are as shown below.
Note: hardware and system of devices must meet the requirements.
iOs 8.0 & above
Android 4.4 & above
Bluetooth support (4.2 &
above)
Correct operation: Scan the QR
code below or download the
VeryFitPro app through the
mobile app store. Pair the watch
up with your device using the
app.
Wrong operation: Pairing the
watch directly using the
bluetooth connection in your
mobile phone’s settings.
4
2. Pairing Process
1. Turn on the Bluetooth
and GPS on your
mobile phone.
2. Find the binding
request on the pull-
down list on the
homepage of the app.
Select product
model: ID205U
Click “OK“ to
complete binding.
Notes:
•During the pairing process, the VeryFitPro app will prompt you to enable GPS and
Bluetooth, and to authorize the VeryFitPro app to get access to the GPS on your
mobile device.
•iPhones will not prompt you with any information unless you complete Bluetooth
pairing on your ID205U watch in the built-in Bluetooth in your mobile phone after
binding.
5
Synchronous Data
In daily wear, the watch can detect all kinds of product data. The user needs to connect
the watch with bluetooth on the app before synchronous operation. The detailed
operations are shown as follows:
Open the mobile APP > swipe down the page > sync prompt appears.
Notes:
•Please synchronize the data at least once every 7 days to avoid data loss at the
watch end.
6
Instructions for Use
1. Charging Schematic
Connect and charge the watch according to the picture. It needs to be charged to
activate the watch when it is started up for the first time.
2. Wearing / Installation
Wear
Replace the strap
Wear the device a finger’s distance from
the wrist bone and adjust the tightness of
the wristband to a comfortable position.
Flip the switch and take
out the wristband.
Tip: Wearing the device too loosely may affect the accuracy of heart rate data.
7
Operating Instructions
1. Definition of Key Functions
Press the right key
to return to previous
interface.
2. Watch Dial Switch
Replacing the dial
interface will appear
after pressing and
holding the dial.
8
3. Main Interface Operation
Swipe the screen to enter different interfaces (interactive interface tile diagram).
9
Function Introduction
1. Icon Function Introduction
Enter the sports window,
and choose different
sports modes. Change
the sports moe on the
app.
Perform a heart rate
test to check your heart
rate data for the day.
Suitable for measuring
blood oxygen levels.
Suitable for measuring
diastolic/systolic blood
pressure.
*Blood pressure
measurements are for
reference only.
Help yourself to
regulate your breathing
and relax your mood.
View, turn off or turn on
the alarm clock. You need
to add an alarm clock on
the mobile APP.
Control music play on
your mobile phone
(watch cannot store
music)
Timing and countdown
functions.
Record recent sports.
Notes: For more functions (sleeping) and operations, please check the VeryFitPro
software of the mobile phone.
10
2. Starting Sports Mode
1. Enter Sports Mode
Click the sports icon →select your desired sports type → enter the sports
countdown automatically.
2. During Sports Mode
Pause sports: press the right key.
Restore sports: press the right key.
3. Ending Sports Mode
End sports: press and hold the right key → select the end button on the screen.
3. Women’s Health Tracking
Display location: in the data bar.
Inhaltsverzeichnis
Sprachen:
Andere ALZA Schrittzähler Handbücher
