Amana W10096991A Bedienungsanleitung

ELECTRONIC DRYER

USE AND CARE GUIDE S]_CHEUSE ]_LECTRONIQUE

GUIDE D'UTILISATION

ET D'ENTRETIEN

Table of Contents Table des matibres

SECURITEDELASECHEUSE................................................13

VERIFICATION D'UNE CIRCULATION D'AIR

ADg:QUATE POUR LE SYSTEME D'g::VACUATION ............... 15

TABLEAU DE COMMANDE ET CARACT¢:RISTIQUES .......... 16

GUIDE DE PROGRAMMES ..................................................... 17

UTILISATION DE LA S¢:CHEUSE ............................................ 18

ENTRETIEN DE LA SECHEUSE .............................................. 19

DEPANNAGE ............................................................................ 21

GARANTIE ................................................................................ 23

ASSISTANCE OU SERVICE ............... COUVERTURE ARRli-RE

Para una versi6n de estas instrucciones en espa_ol, consulte la pagina de "Ayuda o servicio tecnico'.

W10096991A

W10096993A - SP

DRYER SAFETY

Your safety and the safety of others are very important,

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions,

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

WARNING -ofFi,o..

- Clothes dryer installation must be performed by a qualified installer.

- install the clothes dryer according to the manufacturer's instructions and local codes.

-Do not install a clothes dryer with flexible plastic venting materials or flexible metal

(foil type) duct. if flexible metal duct is installed, it must be of a specific type identified

by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting

materials are known to collapse, be easily crushed, and trap lint. These conditions will

obstruct clothes dryer airflow and increase the risk of fire.

- To reduce the risk of severe injury or death, follow all installation instructions.

- Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING." To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

[] Read all instructions before using the dryer.

[] Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to

a chemical reaction that could cause a load to catch fire.

[] Do not dry articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry-

cleaning solvents, or other flammable or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is

used near children.

[] Before the dryer is removed from service or discarded,

remove the door to the drying compartment.

[] Do not reach into the dryer if the drum is moving.

[] Do not install or store the dryer where it will be exposed

to the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the dryer or attempt

any servicing unless specifically recommended in this

Use and Care Guide or in published user-repair

instructions that you understand and have the skills to

carry out.

[] Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric

softener or product.

[] Do not use heat to dry articles containing foam rubber or

similarly textured rubber-like materials.

[] Clean lint screen before or after each load.

[] Keep area around the exhaust opening and adjacent

surrounding areas free from the accumulation of lint, dust,

and dirt.

[] The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

[] See "Electrical Requirements" located in the installation

instructions for grounding instructions.

SAVE THESE INSTRUCTIONS

WARNING: For your safety, the information in this manual must be followed to minimize I

the risk of fire or explosion, or to prevent property damage, personal injury, or death. /

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance,

- WHAT TO DO IF YOU SMELL GAS:

=Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

®Clear the room, building, or area of all occupants.

•immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

®if you cannot reach your gas supplier, call the fire department.

-installation and service must be performed by a qualified installer, service agency, or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the "What to do if you smell gas" instructions.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Fire Hazard

Use a heavy metal vent,

Do not use a plastic vent.

Do not use ametal foil vent,

Failure to follow these instructions can result in death

or fire.

Good air flow

Along with heat, dryers require good air flow to efficiently

dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See "Installation

Instructions."

The venting system attached to the dryer plays a big role in

good air flow.

Service calls caused by improper venting are not covered

by the warranty and will be paid by the customer, regardless

of who installed the dryer.

Maintain good air flow by:

[] Cleaning your lint screen before each load.

[] Replace plastic or foil vent material with 4" (102 mm)

diameter heavy, rigid vent material.

[]

[] Use the shortest length of vent possible.

Use no more than four 90° elbows in a vent system;

each bend and curve reduces air flow.

[]

Bet

Remove lint and debris from the exhaust hood.

Remove lint from the entire length of the vent system at

least every 2 years. When cleaning is complete, be sure

to follow the "installation Instructions" supplied with your

dryer for final product check.

Clear away items from the front the dryer.

USE AUTOMATIC DRY CYCLES FOR BETTER

FABRIC CARE AND ENERGY SAVINGS

Use the Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Dry

cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the

dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.

With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.

Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.

CONTROL PANEL & FEATURES

TIMED

DRY

damp dry

AIR DRY

NOHEAT

medium end of cycle signal

Not all features and options are available on all models.

Appearance may vary.

ODRYER CYCLE KNOB

Use your Dryer Cycle Knob to select available cycles on

your dryer. Turn the knob to select a cycle for your laundry

load. See "Cycle Guide" for detailed descriptions of cycles.

TIMED DRY

Will run the dryer for the specified time on the control.

On models with a selectable temperature knob, you

may choose a setting based on the fabrics in your load.

Drying time and temperature will depend on your dryer

model.

AUTOMATIC DRY

Senses moisture in the load or air temperature and shuts

off when the load reaches the selected dryness level.

Gives the best drying in the shortest time. Drying time

will vary based on fabric type, load size, and dryness

setting.

TEMPERATURE

Select a drying temperature based on the fabrics in your

load. If you are unsure of the temperature to select for a

load, select the lower setting rather than the higher setting.

PUSH TO START/END OF CYCLE SIGNAL

The End of Cycle Signal produces an audible sound when

the drying cycle is finished. Promptly removing clothes at

the end of the cycle reduces wrinkling.

Turn the END OF CYCLE SIGNAL knob to select the

desired setting (On or Off). Press the PUSH to START

knob to start the dryer.

CYCLE GUIDE --AUTOMATIC DRY CYCLES

Not all cycles and settings are available on all models.

Items todry: _ Dryness Level:- Temperature:- _ Cycle Details:

u u H

= = =

Jeans, heavy work clothes,

towels

Work clothes, medium

weight fabrics, sheets

Casual, shirts, pants,

lightweight items,

synthetics, delicates,

athletic wear

More Dry/Very Dry

Energy Preferred

Less Dry

More Dry/Very Dry

Energy Preferred

Less Dry

More Dry/Very Dry

Energy Preferred

Less Dry

High

Medium

Low

Automatic cycles give the best drying in the

shortest time. Drying time varies based on fabric

type, load size, and dryness setting.

Select a drying temperature based on the fabrics

in your load. If you are unsure of the temperature

to select for a load, select the lower setting rather

than the higher setting.

NOTE: If loads do not seem as dry as you would like, select Very/More Dry next time you dry a similar load. If loads seem drier than

you like, select Less Dry next time you dry a similar load.

CYCLE GUIDE -- TIMED DRY CYCLES

Not all cycles and settings are available on all models.

TIMED DRY -Will run the dryer for the specified time on the control.

_ _-- _ _ .

Items to dry: Cycle: Temperature: Cycle Details:

Large or heavy items such

as thick towels or robes

Any load

Rubber, plastic, heat

sensitive fabrics

Heavy Duty/

Heavy Dry

Damp Dry

Tumble Press®

Air Dry/No Heat

No Heat Fluff

Choose high to dry large or heavy loads.Any

Any

N/A

Dries items to a damp level or for items that do not

require an entire drying cycle.

Use low to medium temperature to smooth out

wrinkles, such as those found in clothes packed

in a suitcase or in items wrinkled from being left in

the dryer too long.

No heat drying.

Setting the Drying Temperature

If your dryer has multiple heat settings:

[] A High temperature setting may be used for drying

heavyweight items such as towels and work clothes.

[] A Low to Medium temperature setting may be used for

drying medium-weight items such as sheets, blouses,

dresses, underwear, permanent press fabrics, and some

knits.

[] Use the Air Dry/No Heat or No Heat Fluff setting for foam,

rubber, plastic, or heat-sensitive fabrics.

[] Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for

various loads, refer to the care label directions.

USING YOUR DRYER

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this dryer.

Before using your dryer, wipe the dryer drum with a damp cloth

to remove dust from storing and shipping.

1. Clean the lint screen

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death

or fire,

3. Select the desired cycle

AUTOMATIC heaw

DRY OFF duty 70

wrinkle

prevent

cOOl down

less dr'

energy preferred

more dry

OFF 10

TIMED

DRY

damp dry

cool down

OFF

20 AIR DRY

NO HEAT

Clean the lint screen before each load. Pull the lint screen out of

its holder. Roll lint off the screen with your fingers. Do not rinse or

wash screen to remove lint. Push the lint screen firmly back into

place. For additional cleaning information, see "Dryer Care".

:2. Load the dryer

Select the desired cycle for your load. See the Cycle Guide

for more information about each cycle.

AUTOMATIC DRY Cycles

You can select a different dryness level, depending on your

load, by turning the knob to dryness level.

Selecting Very Dry, ENERGY PREFERRED, or Less Dry

automatically adjusts the dryness level at which the dryer will

shut off. Once a dry level is set, it cannot be changed without

stopping the cycle.

AUTOMATIC DRY cycles give the best drying in the shortest

time. Drying time varies based on fabric type, load size, and

dryness setting.

Place laundry in the dryer. Close the door. Do not tightly pack

the dryer; clothes should be able to tumble freely.

NOTE: Your model may have a different door than the one

shown. Some models have drop down doors.

4. Set cycle settings and options

TEMPERATURE

medium

low high

Select cycle settings and options by turning the knob to the

desired position.

NOTE: Not all options and settings are available with all cycles.

Select End of Cycle Signal

(depending on model)

PUSH TO START

end of cycle signal

off

Turn the END OF CYCLE SIGNAL knob to select the desired

setting (On or Off). The End of Cycle Signal produces an

audible sound when the drying cycle is finished. Promptly

removing clothes at the end of the cycle reduces wrinkling.

6. Press PUSH to START to begin

cycle (appearance may vary)

Push to Start

Push and hold the PUSH to START knob to begin the cycle.

DRYER CARE

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Place dryer at least 18 inches (460 ram) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

CLEANING THE DRYER INTERIOR

To clean dryer drum

1. Apply a liquid, nonflammable household cleaner to the

stained area of the drum and rub with a soft cloth until

stain is removed.

2. Wipe drum thoroughly with a damp cloth.

3. Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments that contain loose dyes, such as denim

blue jeans or brightly colored cotton items, may discolor the

dryer interior. These stains are not harmful to your dryer and

will not stain future loads of clothes. Dry these items inside

out to avoid drum staining.

REMOVING ACCUMULATED LINT

From inside the dryer cabinet

Lint should be removed every 2 years, or more often,

depending on dryer usage. Cleaning should be done

by a qualified servicer.

From the exhaust vent

Lint should be removed every 2 years, or more often,

depending on dryer usage.

CLEANING THE LINT SCREEN

Every load cleaning

The lint screen is located in the dryer. A screen blocked by

lint can increase drying time.

To clean:

1. Pull the lint screen out of its holder. Roll lint off the

screen with your fingers. Do not rinse or wash screen to

remove lint. Wet lint is hard to remove.

2. Push the lint screen firmly back into place.

CLEANING THE LiNT SCREEN

2. Push the lint screen firmly back into place.

IMPORTANT:

[] Do not run the dryer with the lint screen loose,

damaged, blocked, or missing. Doing so can cause

overheating and damage to both the dryer and fabrics.

[] If lint falls off the screen into the dryer during removal,

check the exhaust hood and remove the lint. See

"Venting Requirements."

As needed cleaning

Laundry detergent and fabric softener residue can build

up on the lint screen. This buildup can cause longer drying

times for your clothes, or cause the dryer to stop before

your load is completely dry. The screen is probably clogged

if lint falls off while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months,

or more frequently, if it becomes clogged due to a residue

buildup.

To wash:

1. Roll lint off the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent.

Scrub lint screen with the brush to remove residue

buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel.

Reinstall screen in dryer.

VACATION, STORAGE,

AND MOVING CARE

Non-Use or Storage Care

Operate your dryer only when you are at home. If you will

be on vacation or not using your dryer for an extended

period of time, you should:

1. Unplug dryer or disconnect power.

2. (For gas dryers only): Close shut off valve to gas supply

line.

3. Clean lint screen. See "Cleaning the Lint Screen."

Moving Care

For power supply cord-connected dryers:

1. Unplug the power supply cord.

2. Make sure leveling legs are secure in dryer base.

3. Use tape to secure dryer door.

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock,

For direct-wired dryers:

1. Turn off power at fuse or breaker box.

2. Disconnect wiring.

3. Make sure leveling legs are secure in dryer base.

4. Use tape to secure dryer door.

For gas dryers:

1. Unplug or disconnect power to dryer.

2. Close shutoff valve in gas supply line.

3. Disconnect gas supply line pipe and remove fittings

attached to dryer pipe.

4. Cap the open fuel supply line.

5. Make sure leveling legs are secure in dryer base.

6. Use tape to secure dryer door.

Reinstalling the Dryer

Follow the 'qnstallation Instructions" to locate, level,

and connect the dryer.

CHANGING THE DRUM LIGHT

(ON SOME MODELS)

1. Unplug dryer or disconnect power.

2. Open the dryer door. Locate the light bulb cover on the

back wall of the dryer. Using a 1/4" nut driver or socket

wrench, remove the screw located in the lower right-hand

corner of the cover. Remove the cover.

3. Turn bulb counterclockwise. Replace the bulb with

a 10-watt appliance bulb only. Replace the cover and

secure with the screw.

4. Plug into a grounded outlet or reconnect power.

TROUBLESHOOTING

To possibly avoid a service call, first try the suggestions listed here or refer to the "Assistance or Service" page.

mfyou experience Possible Oauses Solution

Clothes are not drying Lint screen clogged with lint. Lint screen should be cleaned before each load.

satisfactorily, drying

times are too long Has the Air Only cycle been Select the right cycle for the types of garments being dried.

selected. See "Cycle Guide."

Load too large and heavy to dry Separate the load to tumble freely.

quickly.

Exhaust vent or outside exhaust Run the dryer for 5-10 minutes. Hold your hand under the

hood clogged with lint, restricting air outside exhaust hood to check air movement. If you do not feel

movement, air movement, clean exhaust system of lint or replace exhaust

vent with heavy metal or flexible metal vent. Make sure vent is

not crushed or kinked. See "Installation Instructions'.

Fabric softener sheets blocking Use only one fabric softener sheet, and use it only once.

the grill.

Exhaust vent not the correct length. Check that the exhaust vent is not too long or has too many

turns. Long venting will increase drying times. Make sure vent

is not crushed or kinked. See "Installation Instructions'.

Exhaust vent diameter not the Use 4" (102 mm) diameter vent material.

correct size.

Dryer located in a room with Proper operation of dryer cycles requires temperatures above

temperature below 45°F (7°C)? 45°F (7°C).

Dryer located in a closet without Closet doors must have ventilation openings at the top and

adequate opening, bottom of the door. The front of the dryer requires a minimum of

1" (25 mm) of airspace, and, for most installations, the rear of the

dryer requires 5" (127 mm). See "Installation Instructions".

Dryer will not run Door not closed completely. Make sure the dryer door is closed completely.

PUSH to START knob not pressed Press and hold the PUSH to START knob until you hear the dryer

firmly or held long enough, drum moving.

Household fuse is blown or circuit Electric dryers use 2 household fuses or circuit breakers. The

breaker has tripped, drum may be turning, but you may not have heat. Replace both

fuses or reset the circuit breaker. If the problem continues, call

an electrician.

Incorrect power supply. Electric dryers require 240-volt power supply.

Check with a qualified electrician.

Wrong type of fuse. Use a time-delay fuse.

Unusual sounds Dryer had a period of non-use. If the dryer hasn't been used for awhile, there may be a

thumping sound during the first few minutes of operation.

A coin, button, or paper clip caught Check the front and rear edges of the drum for small objects.

between the drum and front or rear Clean out pockets before laundering.

of the dryer.

It is a gas dryer. The gas valve clicking is a normal operating sound.

All four legs are not installed, dryer The dryer may vibrate if not properly installed.

not level front to back and/or side to See "Installation Instructions".

side.

Clothing knotted or balled up. When balled up, the load will bounce, causing the dryer to

vibrate. Separate the load items and restart the dryer.

No heat Household fuse is blown or circuit The drum may be turning, but you may not have heat. Electric

breaker has tripped, dryers use 2 household fuses or circuit breakers. Replace both

fuses or reset the circuit breaker. If the problem continues, call

an electrician.

Supply line valve not open. For gas dryers, is the valve open on the supply line.

Incorrect power supply. Electric dryers require 240-volt power supply.

Check with a qualified electrician. J

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Amana Trockner Handbücher

Amana

Amana ALE230RAW Bedienungsanleitung

Amana

Amana NGD7300W Gebrauchsanweisung

Amana

Amana NDG8805AWW Bedienungsanleitung

Amana

Amana ned4655ew Bedienungsanleitung

Amana

Amana 2200672 Bedienungsanleitung

Amana

Amana TEA600 Bedienungsanleitung

Amana

Amana ned4655ew Bedienungsanleitung

Amana

Amana NED4705EW Bedienungsanleitung

Amana

Amana LE4427 Bedienungsanleitung

Amana

Amana LEA20AW Bedienungsanleitung

Amana

Amana NGD4500VQ Bedienungsanleitung

Amana

Amana NGD7300WW Bedienungsanleitung

Amana

Amana Tandem NGD7300WW0 Bedienungsanleitung

Amana

Amana NGD5800TQ0 Bedienungsanleitung

Amana

Amana W10232964A Bedienungsanleitung

Amana

Amana NED7200T Bedienungsanleitung

Amana

Amana LE4217W/L2 Bedienungsanleitung

Amana

Amana NGD5800DW0 Bedienungsanleitung

Amana

Amana ALG866SAC Handbuch

Amana

Amana Tandem NED7300WW1 Bedienungsanleitung

Amana

Amana NGD5100TQ0 Bedienungsanleitung

Amana

Amana NED5200TQ Bedienungsanleitung

Amana

Amana NGD5700B Bedienungsanleitung

Amana

Amana 4KWED4750 Bedienungsanleitung

Beliebte Trockner Handbücher anderer Marken

Bosch

Bosch WTA79200GB Bedienungsanleitung

Miele

Miele TWH 780 WP Bedienungsanleitung

Asko

Asko T760 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Bedienungsanleitung

Bosch

Bosch Logixx 10 WTB76556GB Technisches Datenblatt

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Bedienungsanleitung

Electrolux

Electrolux EW2H328R2 Bedienungsanleitung

Beko

Beko DS8433RX1M Bedienungsanleitung

Dawlance

Dawlance Spinner DS 6000 C Bedienungsanleitung

Electrolux

Electrolux TP5080TW Bedienungsanleitung

AEG

AEG TR838P4OB Bedienungsanleitung

Indesit

Indesit IDV 75 Bedienungsanleitung

Infiniton

Infiniton SD-DG85C Bedienungsanleitung

BOMANN

BOMANN WT 5019 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Bedienungsanleitung

Asko

Asko T793C Bedienungsanleitung

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Bedienungsanleitung

Frigidaire

Frigidaire CAQE7077KW0 Betriebsanleitung