Amana PTAC 24" Betriebsanleitung

RS4200005r11

September 2017

Service Instructions

isa registeredtrademark of MaytagCorporation oritsrelated companiesand isusedunder licenseto Goodman Company,L.P., Houston,TX, USA. Allrightsreserved.

PACKAGE TERMINAL

AIR CONDITIONER/HEAT PUMP

Standard and Remote Applications

with LED M70 Control Board

andR-410A

This manual is to be used by qualified, professionally trained HVAC technicians only.

Goodman does not assume any responsibility for property damage or personal injury

due to improper service procedures or services performed by an unqualified person.

Prideandworkmanshipgointoeveryproducttoprovideourcustomerswithqualityproducts. Itispossible,however,

that during its lifetime a product may require service. Products should be serviced only by a qualified service

technicianwhoisfamiliarwiththesafetyproceduresrequiredintherepairandwhoisequippedwiththeproper tools,

parts, testing instruments and the appropriate service manual. REVIEW ALL SERVICE INFORMATION IN THE

APPROPRIATE SERVICE MANUAL BEFORE BEGINNING REPAIRS.

IMPORTANT NOTICES FOR CONSUMERS AND SERVICERS

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

IMPORTANT INFORMATION

INDEX

PRODUCT IDENTIFICATION ..................................................................................4

IMPORTANT INFORMATION...................................................................................2

SPECIFICATIONS ...............................................................................................5

PROPER INSTALLATION.......................................................................................9

MAINTENANCE ............................................................................................... 32

OPERATIONS.................................................................................................. 34

SERVICING .................................................................................................... 38

WIRING DIAGRAMS .......................................................................................... 61

NLY

PERSONNEL

THAT

HAVE

BEEN

TRAINED

INSTALL

ADJUST

SERVICE

REPAIR

(

HEREINAFTER

, “

SERVICE

”)

THE

EQUIPMENT

SPECIFIED

THIS

MANUAL

SHOULD

SERVICE

THE

EQUIPMENT

. I

ADDITION

JURISDICTIONS

THAT

REQUIRE

ONE

LICENSES

SERVICE

THE

EQUIPMENT

SPECIFIED

THIS

MANUAL

ONLY

LICENSED

PERSONNEL

SHOULD

SERVICE

THE

EQUIPMENT

. I

MPROPER

INSTALLATION

ADJUSTMENT

SERVICING

REPAIR

THE

EQUIPMENT

SPECIFIED

THIS

MANUAL

ATTEMPTING

INSTALL

ADJUST

SERVICE

REPAIR

THE

EQUIPMENT

SPECIFIED

THIS

MANUAL

WITHOUT

PROPER

TRAINING

MAY

RESULT

PRODUCT

DAMAGE

PROPERTY

DAMAGE

PERSONAL

INJURY

DEATH

Tolocateanauthorizedservicer,pleaseconsultyourtelephonebookorthedealer

fromwhom you purchasedthis product. Forfurther assistance,pleasecontact:

CONSUMER INFORMATION LINE -

AMANA®BRAND PRODUCTS TOLL FREE

1-877-254-4729 (U.S. only)

email us at: [email protected]

fax us at: (713) 856-1821

(Not a technical assistance line for dealers.)

Outside the U.S., call 1-713-861-2500.

(Not a technical assistance line for dealers.)

Your telephone company will bill you for the call.

WARNING

THIS AIR CONDITIONER IS NOT MEANT TO PROVIDE

UNATTENDED COOLING OR LIFE SUPPORT FOR

PERSONS OR ANIMALS WHO ARE UNABLE TO

REACT TO THE FAILURE OF THIS PRODUCT.

THE FAILURE OF AN UNATTENDED AIR CONDITION-

ER MAY RESULT IN EXTREME HEAT IN THE COND-

ITIONED SPACE CAUSING OVERHEATING OR

DEATH OF PERSONS OR ANIMALS.

PRECAUTIONS MUST BE TAKEN TO WARN OF OR

GUARD AGAINST SUCH AN OCCURENCE.

WARNING

GOODMAN WILL NOT BE RESPONSIBLE FOR ANY INJURY OR PROPERTY DAMAGE ARISING FROM

IMPROPER SERVICE OR SERVICE PROCEDURES. IF YOU INSTALL OR PERFORM SERVICE ON THIS UNIT,

YOU ASSUME RESPONSIBILITY FOR ANY PERSONAL INJURY OR PROPERTY DAMAGE WHICH MAY

RESULT. MANY JURISDICTIONS REQUIRE A LICENSE TO INSTALL OR SERVICE HEATING AND AIR

CONDITIONING EQUIPMENT.

isa registered trademarkof MaytagCorporationor itsrelated companies andis usedunderlicense toGoodmanCompany, L.P.,Houston, TX. Allrights reserved.

PRODUCT IDENTIFICATION

PTC 07 3 G 35 A X X X A A

BASIC MODEL TYPE MAJOR/MINOR DESIGN REV.

PTC = Standard Cooler PTAC

PTH = Standard Heat Pump PTHP

DRY = Dehumid Cooler PTAC

PMC = Cooler w/ Makeup Air Kit

PMH = Heat Pump w/ Makeup Air Kit

HEH = High Efficiency Heat Pump HEHP

HEC = High Efficiency Cooler

COOLING CAPACITY

07 = 7000 BTUH (60 Hz)

09 = 9000 BTUH (60 Hz)

10 = 10000 BTUH (50 Hz)

12 = 12000 BTUH (50 or 60 Hz)

15 = 15000 BTUH (60 Hz)

17 = 16500 BTUH (60 Hz)

RATED VOLTAGE

2 = 115V 60Hz 1Ph

3 = 230/208V 60Hz 1Ph FEATURE CODE Examples

4 = 265V 60Hz 1Ph A = Standard Model PTC073E35AXXX

5 = 240/220V 50Hz 1Ph C = Corrosion Protection (Seacoast) PTC073E50CXXX

D = Power Door PTC073E35CDXX

E = Makeup Air Electric Heate

PTC073E35CQVX

DESIGN SERIES F = Fuse Holder PTC073E35CDQR

E = R-410A 2010 Ratings H = Hydronic

F = R-410A California Model H1 = McQuay Hydronic Replacment

G = R-410A 2012 Ratings K = Added Drain Valve (PTC only)

H = R-410A High EER 2012 L = Lighting Control

J = R-32 N = Non-Branded Front

P = Condensate Pump

Q = Quiet STC Kit

HEATER SIZE R = RF Antenna

00 = no electric heat V = Power Vent

15 = 1.5 kW W = Hard Wired

25 = 2.5 kW X= place holder

35 = 3.5 kw (230/208V) Y = High VA Transformer

= 3.7kW (265V) Use up to 4 as needed

50 = 5.0 kW In Alphabetical order

SPECIFICATIONS

* Actual vent CFM performance w ill vary due to application and installation conditions.

Notes:

¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-w ire kit (PTPWHWK4).

² Minimum Circuit Ampacity (MCA) ratings conform to the National Electric Code; how ever, local codes should apply.

Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.

³ Minimum voltage on 265-volt models is 239 volts; maximum is 292 volts.

5Heating capacity and efficiency based on unit operation w ithout condensate pump; unit automatically sw itches to electric heat at approximately 24°F outdoo

6Specify tw o-digit heater kW size to complete model number.

7R-410A refrigerant used in all systems. R-134A used in Kit Fresh Air.

8All units meet or exceed ASHRAE 90.1 standards.

9 All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) pow er cord and meet UL 484 standards.

10 Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers to compressor only.

4Overcurrent protection for all units w ithout electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay fuses

(included and factory-installed on all Amana® brand 265-volt chassis). See heater perform

EER - EnergyEfficiency RatioperTheAir-Conditioning,

Heating,and RefrigerationInstitute(AHRI) Test

Proceduresand Canadian StandardsAssociation

(CSA) Test Procedures.

COP - Coefficient of PerformanceperAHRI Test

Procedures

PMC/PMH SERIES

Model ¹, 6, 8, 9PMC073G** PMC093G** PMC123G** PMC153G**

230 / 208 230 / 208 230 / 208 230 / 208

Capacity (BTU/h) 7,700 / 7,700 9,000 / 9,000 12,000 / 11,700 15,000 / 14,700

3.5 / 3.5 4.1 / 4.1 5.6 / 5.6 7.0 / 7.0

655 / 655 795 / 795 1,150 / 1,110 1,575 / 1,530

EER 11.7/ 11.7 11.3/ 11.3 10.4/ 10.5 9.5/ 9.6

Kit Fresh Air, CFM 25-35 25-35 25-35 25-35

Kit Dehumidification (Oz/Hr) 5555

Voltage ¹, ³

Amps10

Watts10

Model ¹, 6, 8, 9PMH073G** PMH093G** PMH123G** PMH153G**

230 / 208 230 / 208 230 / 208 230 / 208

Capacity (BTU/h) 7,600 / 7,600 9,000 / 9,000 12,000 / 12,000 14,700 / 14,700

3.6/3.6 4.1/4.1 5.7/5.7 7.0/7.0

640 / 640 795 / 795 1150 / 1150 1,530 / 1,530

EER 11.8 / 11.8 11.3 /11.3 10.4 / 10.4 9.6 / 9.6

Kit Fresh Air, CFM 25-35 25-35 25-35 25-35

Kit Dehumidification (Oz/Hr) 5555

Voltage ¹, ³

Amps10

Watts10

Model ¹, 6, 8, 9PMH074G** PMH094G** PMH124G**

265 265 265

Capacity (BTU/h) 7,700 9,000 12,000

3.2 4.3 5.1

655 795 1150

EER 11.7 11.3 10.4

Kit Fresh Air, CFM 25-35 25-35 25-35

Kit Dehumidification (Oz/Hr) 555

Voltage ¹, ³

Amps10

Watts10

SPECIFICATIONS PTC G SERIES

COOLING - PTC

EER - EnergyEfficiency RatioperTheAir-Conditioning,

Heating,and RefrigerationInstitute(AHRI) Test

Proceduresand Canadian StandardsAssociation

(CSA) Test Procedures.

COP - Coefficient of PerformanceperAHRI Test

Procedures

* Information in this manual applies only to the BA revision of 092G*** model.

** Actual vent CFMperformance w ill vary due to application and installation conditions.

No t e s :

¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).

² MinimumCircuit Ampacity (MCA) ratings conformto the National Electric Code; however, local codes should apply.

Minimumvoltage on 230/208-volt models is 197 volts; maximumis 253 volts.

3Minimumvoltage on 265-volt models is 239 volts; maximumis 292 volts.

4Minimumvoltage on 115-volt models is 104 volts; maximumis 127 volts.

6Heatin

capacit

and efficienc

based on unit operation without condensate pump; unit automaticall

switches to electric heat at approximatel

24°F outdoor

7Specify two-digit heater kW size to complete model number.

8R-410A refrigerant used in allsystems.

9All units meet or exceed ASHRAE90.1 standards.

10 All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.

11 Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers to compressor only.

5Overcurrent protection for allunits without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay fuses

(included and factory-installed on all Amana® brand 265-volt chassis). See heater perform

PTC PTC PTC PTC PTC PTC PTC PTC

073G** 074G** 092G***BA* 093G*** 094G*** 123G** 153G*** 154G***

230/208 265 115 230 / 208 265 230/208 230 / 208 265

Capacity (BTU/h) 7700/7700 7,700 9,000 9,000 / 9,000 9,000 1200/11700 15,000 / 14,700 14,800

3.5/3.5 3.0 8.3 4.1 / 4.1 3.6 5.6/5.6 7.0 / 7.0 6.1

655/655 655 795 805 / 785 795 1150/1110 1,500 / 1,470 1,480

EER 11.7/11.7 11.7 11.3 11.2 / 11.5 11.3 10.4/10.5 10.0 / 10.0 10.0

Unit without Electric Heater

4.33.68.34.94.46.88.57.4

High 330 340 290 290 290 340 340 340

Low 245 245 264 264 264 245 314 314

High 360 370 310 310 310 370 360 360

Low 270 270 282 282 282 270 332 332

40* 65* 65** 65** 65** 40* 65** 65**

1.71.72.22.22.21.74.44.4

106 103 102 102 102 108 113 113

115 115 117 117 117 125 130 130

Model 1, 7, 9, 10

Voltage ¹, ³

Amps11

Watts11

Min. Circuit Amps 2, 5, 11

Ship Weight (lbs.)

CFM (Cool/Wet Coil)

CFM (Dry Coil)

Ventilated Air, CFM (Fan Only)**

Dehumidification (Pints/Hr.)

Net Weight (lbs.)

SPECIFICATIONS PTC G SERIES

COOLING - PTC

EER - EnergyEfficiency RatioperTheAir-Conditioning,

Heating,and RefrigerationInstitute(AHRI) Test

Proceduresand Canadian StandardsAssociation

(CSA) Test Procedures.

COP - Coefficient of PerformanceperAHRI Test

Procedures

** Actual vent CFMperformance will vary due to application and installation conditions.

No t e s :

¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).

² MinimumCircuit Ampacity (MCA) ratings conformto the National Electric Code; however, local codes should apply.

Minimumvoltage on 230/208-volt models is 197 volts; maximumis 253 volts.

3Minimumvoltage on 265-volt models is 239 volts; maximumis 292 volts.

4Minimumvoltage on 115-volt models is 104 volts; maximumis 127 volts.

6Heating capacity and efficiency based on unit operation without condensate pump; unit automatically switches to electric heat at approximately 24°Foutdoor

7Specify two-digit heater kWsize to complete modelnumber.

8R-410A refrigerant used in all systems.

9All units meet or exceed ASHRAE90.1 standards.

10 All units less than 250 volts have a LeakCurrent Detector Interrupter (LCDI) power cord and meet UL 484 standards.

11 Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers tocompressor only.

5Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay fuses

(included and factory-installed on all Amana® brand 265-volt chassis). See heater perform

PTC PTC PTC

073G**DA 093G***DA 123G**DA

230/208 230 / 208 230/208

Capacity (BTU/h) 7000/7000 9,200 / 9,000 11500/11400

3.1/3.1 4.1 / 4.1 5.0/5.0

580/560 790/765 1045/1015

EER 12/12.5 11.6 / 11.7 11.0/11.0

Unit without Electric Heater

3.7 5.0 6.2

High 330 290 340

Low 245 264 245

High 360 310 370

Low 270 282 270

40* 65** 40*

1.7 2.2 1.7

106 108 110

115 119 126

Model 1, 7, 9, 10

Voltage ¹, ³

Amps11

Watts11

Min. Circuit Amps 2, 5, 11

Ship Weight (lbs.)

CFM (Cool/Wet Coil)

CFM (Dry Coil)

Ventilated Air, CFM (Fan Only)**

Dehumidification (Pints/Hr.)

Net Weight (lbs.)

SPECIFICATIONS

EER - EnergyEfficiency RatioperTheAir-Conditioning,

Heating,and RefrigerationInstitute(AHRI) Test

Proceduresand Canadian StandardsAssociation

(CSA) Test Procedures.

COP - Coefficient of PerformanceperAHRI Test

Procedures

** Actual vent CFMperformance will vary due to application and installation conditions.

No t e s :

¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).

² MinimumCircuit Ampacity (MCA) ratings conformto the National Electric Code; however, local codes should apply.

Minimumvoltage on 230/208-volt models is 197 volts; maximumis 253 volts.

3Minimumvoltage on 265-volt models is 239 volts; maximumis 292 volts.

4Minimumvoltage on 115-volt models is 104 volts; maximumis 127 volts.

6Heating capacity and efficiency based on unit operation without condensate pump; unit automatically switches to electric heat at approximately 24°Foutdoor

7Specify two-digit heater kWsize to complete modelnumber.

8R-410A refrigerant used in all systems.

9All units meet or exceed ASHRAE90.1 standards.

10 All units less than 250 volts have a LeakCurrent Detector Interrupter (LCDI) power cord and meet UL 484 standards.

11 Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers tocompressor only.

5Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay fuses

(included and factory-installed on all Amana® brand 265-volt chassis). See heater perform

HEC HEC HEC

073H** 093H*** 123H**

230/208 230 / 208 230/208

Capacity (BTU/h) 7000/7000 9,200 / 9,000 11600/11400

3.5/3.5 4.5 / 4.5 5.4/5.4

555/535 770/750 1025/990

EER 12.6/13 11.9 / 12 11.3/11.5

Unit w ithout Electric Heater

4.2 5.4 6.6

High 330 290 340

Low 245 264 245

High 360 310 370

Low 270 282 270

40* 65** 40*

1.7 2.2 1.7

106 108 110

115 119 126

CFM (Cool/Wet Coil)

CFM (Dry Coil)

Ventilated Air, CFM (Fan Only)**

Dehumidification (Pints/Hr.)

Net Weight (lbs.)

Model 1, 7, 9, 10

Voltage ¹, ³

Amps11

Watts11

Min. Circuit Amps 2, 5, 11

Ship Weight (lbs.)

COOLING - HEC HEC H SERIES

SPECIFICATIONS

HEAT PUMP - PTH

* Actual vent CFM performance w ill vary due to application and installation conditions.

Notes:

¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-w ire kit (PTPWHWK4).

² Minimum Circuit Ampacity (MCA) ratings conform to the National Electric Code; how ever, local codes should apply.

Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.

³ Minimum voltage on 265-volt models is 239 volts; maximum is 292 volts.

5Heating capacity and efficiency based on unit operation w ithout condensate pump; unit automatically sw itches to electric heat at approximately 24°Foutdoo

6Specify tw o-digit heater kW size to complete model number.

7R-410A refrigerant used in all systems.

8All units meet or exceed ASHRAE 90.1 standards.

9 All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) pow er cord and meet UL 484 standards.

10 Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers to compressor only.

4Overcurrent protection for all units w ithout electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay fuses

(included and factory-installed on all Amana® brand 265-volt chassis). See heater perform

EER - EnergyEfficiency RatioperTheAir-Conditioning,

Heating,and RefrigerationInstitute(AHRI) Test

Proceduresand Canadian StandardsAssociation

(CSA) Test Procedures.

COP - Coefficient of PerformanceperAHRI Test

Procedures

PTH G SERIES

Model ¹, 6, 8, 9PTH

073G**

PTH

093G**

PTH

123G**

PTH

153G**

PTH

074G**

PTH

094G**

PTH

124G**

PTH

154G**

230 / 208 230 / 208 230/208 230 / 208 265 265 265 265

Capacity (BTU/h) 7600/7600 9,000 / 9,000 12,000 / 12,000 14,200 / 14,200 7,600 9,100 12,000 14,200

3.6/3.6 4.2 / 4.2 5.7/5.7 7.0 / 7.0 33.7 4.9 6.1

645/630 785 / 785 1,090 / 1,090 1,465 / 1,465 645 790 1090 1,465

EER 11.7/12.0 11.5 / 11.5 11.0/11.0 9.7 / 9.7 11.7 11.5 11 9.7

Unit without Electric Heater

5.4 5.1 6.9 8.5 3.6 4.5 6.0 7.4

High 330 330 330 390 330 330 390 390

Low 245 245 245 340 245 245 340 340

High 360 360 360 410 360 360 410 410

Low 270 270 270 370 270 270 370 370

40* 65* 65* 65* 65* 65* 65* 65*

1.7 2.2 2.2 4.4 2.2 2.2 4.4 4.4

111 112 123 126 108 112 124 125

131 127 141 143 123 127 142 142

CFM (Dry Coil)

Ventilated Air, CFM (Fan Only)*

Dehumidification (Pints/Hr.)

Net Weight (lbs.)

Ship Weight (lbs.)

Voltage ¹, ³

Amps10

Watts10

Min. Circuit Amps ², 4, 10

CFM (Cool/Wet Coil)

SPECIFICATIONS

HEAT PUMP - HEH

EER - Energy Efficiency Ratio per The Air-

Conditioning, Heating, and Refrigeration

Institute (AHRI) Test Procedures and Canadian

Standards Association (CSA) Test Procedures.

COP - Coefficient of PerformanceperAHRI Test

Procedures

HEH H SERIES

HEH073H

**AXXX HEH093H

**AXXX HEH123H

**AXXX HEH074H

**AXXX HEH094H

**AXXX HEH124H

**AXXX

230 / 208 230 / 208 230 / 208 265 265 265

7,700/7,700 9,000 / 9,000 12,000 / 12,000 7,700 9,100 12,000

4.1 / 4.1 4.7 / 4.7 6.2 / 6.2 3.6 4.2 5.4

595 / 595 720 / 720 1,040 / 1,040 595 730 1,040

12.9 / 12.9 12.5/12.5 11.5/11.5 12.9 12.4 11.5

5.4 5.4 5.4 3.6 3.6 3.6

High 340 330 340 340 330 340

Low 245 245 245 245 245 245

High 370 360 370 370 360 370

Low 270 270 270 270 270 270

65* 65* 65* 65* 65* 65*

1.7 2.2 3.6 1.7 2.2 3.6

107 111 114 107 111 114

122 126 131 122 126 131

*Actual vent CFM performancewill vary due to application and installation conditions.

Model ¹, 6, 8, 9

Voltage ¹, ³

Capacity (BTU/h)

Amps10

Watts10

EER

Net Weight (lbs.)

Ship Weight (lbs.)

Unit without Electric Heater

Min. Circuit Amps ², 4, 10

CFM (Cool/Wet Coil)

CFM(Dry Coil)

Ventilated Air, CFM (Fan Only)*

Dehumidification (Pints/Hr.)

Notes

¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).

² Minimum Circuit Ampacity (MCA) ratings conform to the National Electric Code; however, local codes should apply.

Mi nimum vol ta ge on 230/208-vol t model s is 197 vol ts; maxi mum i s 253 vol ts.

³ Minimumvoltage on 265-volt models is 239 volts;maximum is 292 volts.

⁴Overcurrent protecti on for al l units wi thout el ectri c hea ters is 15 amps.

Overcurrent protection on 265-volt models must be cartridge-style time-delay fuses (included and factory-installed on all Amana® brand 265-volt chassis).

⁵Heati ng capa ci ty and effici ency based on uni t operation wi thout condensa te pump; uni t a utoma ti call y s wi tches to el ectri c heat at approximately 24°F outdoor ambient.

⁶Specify two-digit heater kW size to complete model number.

⁷R-410A refrigerant used in all systems.

⁸All units meet or exceed ASHRAE 90.1 standards.

⁹All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.

¹⁰Refer to electri c heat performance da ta for tota l MCA and recommended overcurrent protecti on. Amps and Watts notati on refers to compressor only.