AmazonBasics B00UG9HB1Q Bedienungsanleitung

Intelligent Electronic Safe

B00UG9HB1Q

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 1 4/6/2015 12:13:24 PM

Ins

Con

•

Pro

English..................................... 3

Français................................... 9

Deutsch ................................... 15

日本語....................................... 21

中文 .......................................... 27

Italiano..................................... 33

Español.................................... 39

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 2 4/6/2015 12:13:25 PM

Instruction Manual •English

AmazonBasics Intelligent Electronic Safe

Contents

•Intelligent Electronic Safe

•Emergency key

•Expansion bolts (4 sets)

•This instruction manual

Product overview

Bolts

Battery Compartment

Reset Button

Emergency Lock Cover

Low Battery Light

Warning Light

Conrm Light

Conrming button (#)

Knob

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 3 4/6/2015 12:13:25 PM

Opening your safe for the ﬁrst time

Use your emergency key the rst time you open your safe, if you don’t know the codes, or if there is

an electronic circuit malfunction.

1. Remove emergency lock cover.

2. Insert the emergency key and turn it clockwise.

3. Turn the knob clockwise to open the door.

Ins

Set

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 4 4/6/2015 12:13:25 PM

Installing the batteries

1. Open the door.

2. Open the battery compartment and insert four AA batteries (not included). Make sure that the

batteries match the + and - in the compartment.

NOTES: Replace the batteries if the low battery light is on ( ).

Setting the user code

1. With the door open, press the Reset button. You will hear two beeps.

2. Input the new code (3-8 digits) on the keypad, then press the #button to conrm. If the conrm

light turns on, the reset is accepted. If the warning light ashes, the code reset is not accepted

and you need to try again.

3. Before you close the door, try the new code to make sure it works.

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 5 4/6/2015 12:13:26 PM

Setting the master code

Use the master code to enter your safe if you forget your User Code.

1. With the door open, press 0,0, then press the Reset button.

2. Input the new code (3-8 digits), then press # to conrm. The (conrm) light turns on and your

new master code is set.

NOTE: If the (conrm) light doesn’t turn on, your new code isn’t set. Repeat these steps.

Opening your safe – after the ﬁrst time

1. Input your user code (3 to 8 digits) on the keypad. Press # to conrm.

2. The conrm light turns on.

3. Rotate the knob clockwise, then open the door.

NOTE: The preset user code is “159”.

Locking the safe

Close the door, then turn the knob counterclockwise to lock it.

Aut

If an

entr

Sec

Bolt

•

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 6 4/6/2015 12:13:26 PM

Automatic lockout

If an incorrect code is entered three times, the safe locks for 30 seconds. Three additional incorrect

entries lock the safe for ve minutes.

Securing the safe

Bolt down your safe for maximum security. You will need:

•Drill

•Pencil

•Hammer

1. Select an isolated, dry, and secure location for your safe. If bolting to a wall, make sure that your

safe is resting on a supporting surface (such as the oor or a shelf). Do not bolt your safe to both

the oor and wall.

2. Set the safe in place, then use a pencil to mark the mounting holes in the oor or wall.

3. Move the safe away, then use a 12mm bit to drill mounting holes that are 2 in. (50mm) deep.

4. Align the safe over the holes, then install the expansion bolts (included) through the holes and

into the mounting surface.

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 7 4/6/2015 12:13:27 PM

Troubleshooting

The safe won’t open when I enter my code.

•Make sure you entered the correct code.

•Press the #after entering the code.

•You might be in lockout mode. Wait 5 minutes and try again.

•Replace the batteries.

The door won’t shut.

•Make sure there are no obstructions.

•If the door bolts are extended, re-enter the user code and turn the knob clockwise to retract

them.

Both the yellow and green lights are on at the same time.

•Replace the batteries.

The warning light is ﬂashing.

•Make sure you entered the correct code.

•Press the # button after entering the code.

Speciﬁcations

•Power supply: 4 X AA batteries (not included)

Safety and Compliance

1. Read the user manual carefully before you use this safe.

2. To reduce the risk of theft, the safe must be afﬁxed to the wall or ﬂoor, mounting process refer to page 7,

securing the safe.

3. Please take care of the emergency key and keep them in one secret place out of safe, please do not put the

emergency keys inside the safe, otherwise, you can not open the safe with emergency key if battery used up.

4. For security of your property, you will need to change the preset code.

5. Do not place the product in an insecure and elevated place, lest it may fall over and damage the product or hurt

people. Never spill liquid over the control panel, or it may cause electrical shock to the electronic parts inside and

disable their proper functions.

6. Never try to dismantle the product by yourself. Unguided dismantling and incorrect reassembly of the inside of

back cover may damage the electrical circuit and affects its performance. Where maintenance is required, please

contact the local service center or local distributor.

com, Inc. or its afﬁ liates.

Cof

Con

•

Pré

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 8 4/6/2015 12:13:27 PM

urt

and

ase

Mode d’emploi •Français

Coffre électronique intelligent AmazonBasics

Contenu

•Coffre électronique intelligent

•Clé de secours

•Boulons à expansion (jeu de 4)

•Ce mode d'emploi

Présentation du produit

Verrous

Compartiment des batteries

Bouton de réinitialisation

Capot du verrouillage de secours

Voyant de batteries faibles

Voyant d'avertissement

Voyant de conrmation

Bouton de conrmation (#)

Bouton

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 9 4/6/2015 12:13:27 PM

Ins

Rég

Première ouverture du coffre

Utilisez votre clé de secours si vous ouvrez votre coffre pour la première fois, si vous ne connaissez

pas les codes ou en cas de dysfonctionnement du circuit électronique.

1. Retirez le capot du verrouillage de secours.

2. Introduisez la clé de secours et tournez-la dans le sens horaire.

3. Tournez le bouton dans le sens horaire pour ouvrir la porte.

B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 10 4/6/2015 12:13:28 PM

Andere Handbücher für B00UG9HB1Q

Inhaltsverzeichnis

Sprachen:

Andere AmazonBasics Sicher Handbücher

AmazonBasics

AmazonBasics B077K3FJHC Bedienungsanleitung

AmazonBasics

AmazonBasics B074KGMWRQ Bedienungsanleitung

AmazonBasics

AmazonBasics B01BGY010C Bedienungsanleitung

AmazonBasics

AmazonBasics B074KDHMKJ Bedienungs- und Sicherheitshinweise

AmazonBasics

AmazonBasics B078HDDS9Y Bedienungsanleitung

AmazonBasics

AmazonBasics B00UG9HB1Q Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung