American DJ FP CFC Bedienungsanleitung

FP CFC

©American DJ Supply Page 1 of 31 FP CFC

AMERICAN DJ

FP CFC

©American DJ Supply Page 2 of 31 FP CFC

FP CFC Operation Manual

The FP CFC controller can be controlled using a 512-DMX console. The Flash Panel 16 together

with the FP CFC controller can make colorful and dynamic light scenery effects.

Customer Support:

American DJ_provides a toll free customer support line, to provide set up

help and to answer any question should you encounter problems during your set up or initial

operation. You may also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 9:00 a.m. to 4:30 p.m. Pacific Standard

Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty. In the unlikely event your unit may

require service please contact American DJ_.

PLEASE recycle the shipping carton when ever possible.

A. Parameter Of FP CFC Control System

Picture 1:The link diagram for the total FP CFC control system

Note:

1) Every export of the FP CFC controller can link 16pcs slim wall lights at most. So every

controller can control 128pcs at the most. The signal output connector for the last light should be

stopped by a Teminator (1 pc 120_ resistor inside) in order to prevent signal interruption. One

controller can control 128pcs but no more then that. When there are more than 128pcs, you will

need to link to a slave controller to control the other lights.

2) Make sure the fixation method of the lights in the screen is the same. The conjunction of the

adjacent lights must be close. Make sure there is no aperture between the two adjacent lights.

FP CFC

©American DJ Supply Page 3 of 31 FP CFC

Picture 2: The link picture for the back of the controller. One master controller can link 3 slave

controllers at most:

Note:

1) The first controller is the master controller which needs a programmed CF card, the card is

inserted into the rear of the controller. The others are slave controllers which do not need the CF

card. One master controller can link 3 slave controllers at most. So the master controller can

control 512pcs total. Every controller can be used as either a master controller or a slave

controller. The slave controllers are controlled through the master controller. The slave controllers

are not used for operation, but they do need to be powered on.

2) Plug the programmed CF card into the master controller and connect the controllers through the

UTP-5 wire or the UTP-5E cable. The length of the cable is 100 meters at most.

Flash Panel 16

1.1 Specification

Weight: 3lbs/1.4kg

Size: 9.8 (L) x 9.8 (W) x 1.85 (H) /L250*W250*H47MM

Power input: AC 120v/60Hz or 230V/50HZ

Wattage: 6W

LEDs: 16PCS 0.164W (3-in-1 LEDs)

Resolution: 16 pixels per meter

3PIN female XLR socket and 3PIN male XLR socket

FP CFC

©American DJ Supply Page 4 of 31 FP CFC

1.2 The picture of the slim wall light

1.3 Dip Switch

When you want to link up the slim wall lights into a screen, all of them must be in the DMX

mode, and dipswitch 10 must be on. All the lights must be of the addressed correctly, or they will

not work as a screen. You can address 512pcs at the most.

B. CF Card

The 133X high speed CF card should be better and the format of the CF card must be FAT

32.There must be at least 4 kinds of file in the CF card to make sure that the FP CFC controller

can work normally. There has been a CF example in your CF card for the screen by fixation

method 3.

1. The Run Chart

The Run Chart must be the BIN file. The first step, you must edit the TXT run chart file by

yourself then translate the TXT run chart file into BIN run chart file by our company's software.

2. The DAT file

There must be at least one DAT file in your CF card. Copy the DAT files to the CF card which

you need to play. You can get the DAT files by our company’s CF Video software .The FP CFC

controller can play 25 DAT files at most. If there is more than 25 DAT files in the CF card,it will

play the preceding 25 DAT files.

3. The LOGO file

FP CFC

©American DJ Supply Page 5 of 31 FP CFC

is the an example of the LOGO file in your CF card. You can program the logo file

using a computer, then copy it to the CF card. There must be only one logo file in the CF card.

3. The Configuration Setting file

The Configuration Setting file is in your CF card. There would be many run chart files in the CF

card, so in the content of the Configuration Setting file, you must order the right BIN run chart file

of the CF card as the FP CFC controller's run chart. For example, if you want have link a 8x8 FP

CFC, you must order the 8x8 BIN run chart file as the run chart of the FP CFC controller in the

content of the Configuration Setting file.

C. FP CFC Controller

1. Parameter Of FP CFC Controller

1.1 Specification

Weight:2.6kg

Size: 365mmx215mmx60mm

Power input: AC 90V~240V/60Hz-50Hz

Control Qty of FP CFC Controller: 8192 pixels

Color range: 256 scales color depth/16,770,000colors

Storage media: CF Memory Card (repeat use)

Max storage: 16G

FPS: 28fp/sec

Display: Animations, videos etc

1.2 The picture of the control panel

1.3 The picture of front side

1.4 The picture of back side

2. FP CFC Controller Operation Manual

Insert the CF card into the CF card slot of the master FP CFC controller. The LCD display is

FP CFC

©American DJ Supply Page 6 of 31 FP CFC

located on the front. You can operate it through the four buttons------MODE, SET UP, UP, and

DOWN. When the power is turned on, the LCD will display:

At this time, you can also press the MODE and SET UP buttons at the same time to skip this

display. Then the controller will read the DAT file name of the CF card automatically.

Press the “MODE” button to activate the main menu: Loop play mode, DMX mode, Sound mode,

Select Video mode

Loop Play mode -- play the DAT files of the CF card one after another in continuous loop

DMX mode -- controlled by DMX controller

Sound mode -- running by sound - activated

Select Video mode -- select the DAT file of the CF card

2.1 Loop Play mode

1) Press the UP or DOWN buttons to RUN/STOP the video. Press the UP button to play the video,

press DOWN button to stop playing the video. Press the “SET UP” button until the display shows:

2) Press the UP or DOWN buttons to increase/decrease the intensity 000%-100% of the R/G/B

LEDs. At 000% the R/G/B LED’s are off, 001% is the lowest intensity, 100% is the highest

intensity. Press the “SET UP” button until the display shows:

3) Press the UP or DOWN buttons to increase/decrease the intensity 000%-100% of all the RGB

LEDs. At 000% the R/G/B LED’s are off, 001% is the lowest intensity,100% is the highest

intensity. Press the “SET UP” button until the display shows:

4) Press the UP or DOWN buttons to select the flash speed. At 00 the flash is off, 01 is the slowest

flash speed, 15 is the fastest flash speed. Press the “SET UP” button until the display shows:

2.2 DMX mode

1) Addressing

You also can control the FP CFC by using the master FP CFC controller to control the whole FP

CFC.

The control board allows you to assign the DMX address which is defined as the first channel. Set

your desired address 001-512 via the UP/DOWN button’s, there are a total 512 pcs to address.

2) DMX-PROTOCOL

FP CFC

©American DJ Supply Page 7 of 31 FP CFC

CHANNEL

VALUE

FUNCTION

CH1

0-9

10-19

20-29

30-39

40-49

50-59

60-69

70-79

80-89

90-99

100-109

110-119

120-129

130-139

140-149

150-159

160-169

170-179

180-189

190-199

200-209

210-219

220-229

230-239

240-249

250-255

Play the DAT files of the CF card one after another in a continuous

loop

Play the first DAT file of the CF card

Play the second DAT file of the CF card

Play the third DAT file of the CF card

Play the fourth DAT file of the CF card

Play the fifth DAT file of the CF card

Play the sixth DAT file of the CF card

Play the seventh DAT file of the CF card

Play the eighth DAT file of the CF card

Play the ninth DAT file of the CF card

Play the tenth DAT file of the CF card

Play the eleventh DAT file of the CF card

Play the twelfth DAT file of the CF card

Play the thirteenth DAT file of the CF card

Play the fourteenth DAT file of the CF card

Play the fifteenth DAT file of the CF card

Play the sixteenth DAT file of the CF card

Play the seventeenth DAT file of the CF card

Play the eighteenth DAT file of the CF card

Play the nineteenth DAT file of the CF card

Play the twentieth DAT file of the CF card

Play the twenty-first DAT file of the CF card

Play the twenty-second DAT file of the CF card

Play the twenty-third DAT file of the CF card

Play the twenty-fourth DAT file of the CF card

Play the twenty-fifth DAT file of the CF card

CH2

000-255

Red (dim-bright)

CH3

000-255

Green (dim-bright)

CH4

000-255

Blue (dim-bright)

CH5

000-255

Dimming (dim-bright)

000-010

No function

CH6

011-255

Flash (slow-fast)

000-015

Play the video in normal speed

CH7

016-255

Play the video from slow to quick

(1frame per second to 240 frames per second)

Note: When there is less than 25 DAT files in the CF card, the value of the first channel

corresponds to the DAT file which do not have in the CF card, it will correspond to the last DAT

file. For example, there are 3 DAT files in the CF card, the value from 30 to 255 of the first

channel is corresponds to the third DAT file.

2.3 Sound mode

1) Press the UP or DOWN buttons to RUN/STOP the video. Press the UP button to play the video,

press the DOWN button to stop playing the video. Press the “SET UP” button until the display

shows:

2) Press the UP or DOWN buttons to select the DAT file of the CF card 01-25. If there are more

than 25 DAT files in the CF card, it will play the preceding 25 DAT files. The “XXX” is the name

of the DAT file in the card. Press the “SET UP” button until the display shows:

FP CFC

©American DJ Supply Page 8 of 31 FP CFC

3) Press the UP or DOWN buttons to select sound-active sensitivity grade 0-31. At 0 sound

activity is off, 1 is the least sensitive, 31 is the most sensitive. Press the “SET UP” button until the

display shows:

4) Press the UP or DOWN buttons to select the frame number 000-240 the video will skip when it

activated by sound each time. 000 is one frame skip when it activated by sound each time, 001 is

two frame skip when it activated by sound each, 240 is 241 frame skip when it activated by sound.

Press the “SET UP” button until the display shows:

5) Press the UP or DOWN buttons to increase/decrease the intensity 000%-100% of the R/G/B

LED’s. At 000% the R/G/B LED’s are off, 001% is the lowest intensity, 100% is the highest

intensity. Press the “SET UP” button until the display shows:

6) Press the UP or DOWN buttons to increase/decrease the intensity 000%-100% of the R/G/B

LED’s. At 000% the R/G/B LED’s are off, 001% is the lowest intensity, 100% is the highest

intensity. Press the “SET UP” button until the display shows:

7) Press the UP or DOWN buttons to select the flash speed. At 00 the flash is off, 01 is the slowest

flash speed, 15 is the fastest flash speed. Press the “SET UP” button until the display shows:

2.4 Select Video mode

1) Press the UP or DOWN buttons to RUN/STOP the video. Press the UP button to play the video,

press the DOWN button to stop playing the video. Press the “SET UP” button until the display

shows:

2) Press the UP or DOWN buttons to select the DAT file of the CF card 01-25. If there is more

than 25 DAT files in the CF card, it will play the preceding 25 DAT files. The “XXX” is the name

of the DAT file in the computer. Press the “SET UP” button until the display shows as follows:

FP CFC

©American DJ Supply Page 9 of 31 FP CFC

3) Press the UP or DOWN buttons to increase or decrease the running speed 001-240-normal of

the video. 001 is to play one frame in one second, 240 is to play 240 frames in one second, normal

is to play at normal speed. Press the “SET UP” button until the display shows:

4) Press the UP or DOWN buttons to increase/decrease the intensity 000%-100% of the R/G/B

LEDs. At 000% the R/G/B LED’s are off, 001% is the lowest intensity, 100% is the highest

intensity. Press the “SET UP” button until the display shows:

5) Press the UP or DOWN buttons to increase/decrease the intensity 000%-100% of all the RGB

LEDs. At 000% the R/G/B LED’s are off, 001% is the lowest intensity, 100% is the highest

intensity. Press the “SET UP” button until the display shows:

6) Press the UP or DOWN buttons to select the flash speed. At 00 the flash is off, 01 is the slowest

flash speed, 15 is the fastest flash speed. Press the “SET UP” button until the display shows:

B. How To Create Video Of CF Card

a. Translate AVI file into DAT file

Method 1

1) Install the CFVideo software. After installation, there will be a shortcut on the desktop.

2) Double-click the shortcut to open the software, this is what should be displayed:

3) Click the icon, and find the AVI file which needs to be translated into DAT file.

FP CFC

4) Double-click the AVI file; this will show the position of the

file behind the icon , click the

icon , , to play/pause/stop the video, click the icon to

make the video full screen, click the icon to capture the picture of the video, click

the icon to find the parameters of the video.

5) Click the icon , find the location of the DAT file, name the DAT file, then

click .

6) Click , it will automatically turn into .

Input the size of the DAT file in the

Inhaltsverzeichnis

Andere American DJ Controller Handbücher

American DJ

American DJ WiTECH8 Wireless Bedienungsanleitung

American DJ

American DJ LED Cube/C Bedienungsanleitung

American DJ

American DJ UC3 wireless Bedienungsanleitung

American DJ

American DJ LED-T-FC Bedienungsanleitung

American DJ

American DJ PRO MIX Bedienungsanleitung

American DJ

American DJ Rainbow PP Montageanleitung

American DJ

American DJ CC-2016 Bedienungsanleitung

American DJ

American DJ S-4A/DMX Bedienungsanleitung

American DJ

American DJ FOZ/UQNQ Bedienungsanleitung

American DJ

American DJ GALATIC STAR 19C Bedienungsanleitung

American DJ

American DJ Light Copilot Bedienungsanleitung

American DJ

American DJ WiFly RGBW8C Bedienungsanleitung

American DJ

American DJ Flash DMXC Montageanleitung

American DJ

American DJ FLASH 2C Montageanleitung

American DJ

American DJ Rainbow PP II Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch