American DJ LS-70 Montageanleitung

LS-70 Parts List:

• 4 x Par 38 Polished Par Cans

• 4 x Medium Screw Base LED Bulbs rated at 100,000 hr. life

(1 x Red, 1 x Yellow, 1 x Green, 1 x Blue)

• 1 x T20F Chase Controller

• 1 x LTS-6™ Light Stand which includes:

1 x Tripod stand

1 x T-bar

2 x collars

2 x telescoping posts

4 x adjustment knobs

4 x bolts and wing nuts

Instructions for setting up your LTS-6™ Light Stand: (See reverse side for a set up diagram)

1. Set up the Tripod stand by adjusting the width of its legs. When the desired width has been se-

lected, tighten the knob on the base of the Tripod.

2. Adjust the telescopic center posts by loosening the knobs on the collars to the preferred height.

The posts will slide into one another going from the largest at the bottom to the smallest at the

top. Tighten the knobs in the collars.

3. Fasten the four bolts and four wing nuts into the T-bar. Finish by placing the T-bar connection

into the top-most center post. It will only t in the smallest post. Tighten the knob on the collar.

4. Reposition if needed, recheck all knobs, and tighten all fastners before mounting any xtures to

your completed LTS-6 light stand.

Buttons and Switches:

1. Blackout Selector - The function of stand-by can be approved or forbidden by Blackout Selector.

2. Linkup Selector - Use this switch to select master or slave is a master/slave configuration.

3. Function Selector - This is used to select Audio/Fast/Medium/Slow mode for the patterns.

4. Channel LED - These LEDS indicate the intensity of the corresponding channel or activity of the

pattern or scene.

5. Stand By Button: This button has differnet functions. In Master mode, tap this button to activate

or deactivate Stand By (its LED flashes when Stand By is active). Press this button for three seconds

to activate one of 15 chase modes or 9 fixed scenes. When chase patterns are activated, each tap of

Pattern button will select a chase pattern. When the scenes are activated, each tap of Pattern button

will forward a scene step by step.

6. Pattern Button: In Master mode, use this button to select chase pattern or scene.

©American DJ ® Los Angeles, CA 990040 USA

LS-70

Portable Lighting System

DMX (value) FUNCTION

0 - 9 All on

10 - 19 Scene 1

20 - 29 Scene 2

30 - 39 Scene 3

40 - 49 Scene 4

50 59 Scene 5

60 69 Scene 6

70 - 79 Scene 7

80 89 Scene 8

90 99 Scene 9

210 - 219 Mode 12

220 - 229 Mode 13

230 - 239 Mode 14

240 - 249 Mode15

250 - 255 All off

100 - 109 Mode 1

110 - 119 Mode 2

120 - 129 Mode 3

130 - 139 Mode 4

140 - 149 Mode 5

150 - 159 Mode 6

160 169 Mode 7

170 179 Mode 8

180 - 189 Mode 9

190 199 Mode 10

200 209 Mode 11

DMX (value) FUNCTION DMX (value) FUNCTION

DMX VALUES AND TRAITS

Customer Support: American DJ®provides a toll free customer support line, to provide help and to answer

any question should you encounter problems during your set up or initial operation. You may also visit us on

the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through Friday

9:00 a.m. to 5:00 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

American DJ®

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-582-2610

Web: www.americandj.com / E-mail: [email protected]

Specications:

Input Power: 120/60Hz

Line Output: 0.5A/Line, Total 2A

DMX Channels: 1 Ch.

Fuse: 3.0A

Universal DMX Control: This function allows you to use a Elation® universal DMX-512 controller to

control the different scenes and modes. A DMX controller allows you to create unique programs tai-

lored to your individual needs.

1. The LS-70 System is a one DMX channel fixture. See below for a description of the DMX traits.

2. Put the Master/Slave switch into the Slave position. There is no need to set a DMX address, as

soon as you connect the DMX controller to the T20F the T20F will be assinged the DMX address

of 1. When DMX mode is the active the Stand By Button LED will glow.

3. For help operating in DMX mode consult the manual included with your DMX controller.

Set Up Diagram

Andere American DJ Beleuchtungsausrüstung Handbücher

American DJ

American DJ CW-12 System Bedienungsanleitung

American DJ

American DJ ENCORE FR20 DTW Bedienungsanleitung

American DJ

American DJ Green Phantom Bedienungsanleitung

American DJ

American DJ Titan 250 Montageanleitung

American DJ

American DJ Luna 4 Montageanleitung

American DJ

American DJ Epsilon Bedienungsanleitung

American DJ

American DJ Reflex LED DMX Bedienungsanleitung

American DJ

American DJ BAT Bedienungsanleitung

American DJ

American DJ Energy DMX Montageanleitung

American DJ

American DJ SUNRAY lll Bedienungsanleitung

American DJ

American DJ Jellyfish Bedienungsanleitung

American DJ

American DJ P64 LED WH Montageanleitung

American DJ

American DJ HYDRO Bedienungsanleitung

American DJ

American DJ Mega Par Profile System Bedienungsanleitung

American DJ

American DJ Whirl 250 Montageanleitung

American DJ

American DJ INNO POCKET SPOT Bedienungsanleitung

American DJ

American DJ Micro Hypnotic Bedienungsanleitung

American DJ

American DJ Star Winder Bedienungsanleitung

American DJ

American DJ Cinco Star Montageanleitung

American DJ

American DJ Flat Par QA12X Bedienungsanleitung

American DJ

American DJ Vortex 1200 Bedienungsanleitung

American DJ

American DJ Inno Color Beam LED Bedienungsanleitung

American DJ

American DJ Inno Color Beam Z19 Montageanleitung

American DJ

American DJ Vizi LED Spot Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung