American DJ Master Blaster Bedienungsanleitung

SPECIFICATIONS:

MODEL - Master Blaster-700™

ELECTRONIC THERMO SENSING

WEIGHT: 13 LBS.

DIMENSIONS: 6.5" X 6.5" X 16"

FUSE: 7A AGC

SUPPLY VOLTAGE: 120V

WARM UP TIME: 5 Minutes

TANK CAPACITY: 1 Quart Removable

OUTPUT: 4,000 cubic feet per minute

FLUID TYPE: Water Base American DJ Fog Juice™

DUTY CYCLE: Not to exceed 6 hours turned on.

HEATER: 700 WATT

Affordable Quality Lighting Products from American DJ Supply, Inc. Los Angeles, CA. 90058 Page 1

NNEEVVEERRPPOOIINNTTOORRAAIIMMAANNYYFFOOGGMMAACCHHIINNEE

TTOOWWAARRDDSSPPEEOOPPLLEEOORRTTHHEEIIRRCCLLOOTTHHIINNGG..

FFOOGGMMAACCHHIINNEESSEEMMIITTHHOOTTVVAAPPOORRAANNDD

SSHHOOUULLDDBBEEUUSSEEDDWWIITTHHTTHHEESSAAMMEECCAARREE

TTHHAATTYYOOUUWWOOUULLDDOOBBSSEERRVVEEWWHHEENNUUSSIINNGG

AANNEELLEECCTTRRIICCKKEETTTTLLEEOORRIIRROONN..

IINNTTRROODDUUCCTTIIOONN::

Congratulations, you have just purchased one of the most innovative and reliable fog

machines on the market today! The MMaasstteerrBBllaasstteerr--770000and the MMaasstteerrBBllaasstteerr11000000are

American DJ®User Instructions

TO HELP PREVENT UNIT FROM CLOGGING, USE

AMERICAN DJ® CLEAN MACHINE™ LIQUID. CLEAN

MACHINE IS RECOMMENDED WHEN STORING YOUR

FOGGER FOR MORE THAN 1 WEEK, OR AT LEAST ONCE

A MONTH AS NORMAL MAINTENANCE WHEN UNIT IS

BEING USED ALL THE TIME. ITS LIKE A TUNE UP FOR

YOUR FOG MACHINE! CLEAN MACHINE REMOVES PAR-

TICLE BUILD UP IN THE HEATER AND GIVES LONGER

LIFE TO THE FOG MACHINE. CLEAN MACHINE IS AVAIL-

ABLE IN GALLON OR QUART BOTTLES FROM YOUR

LOCAL AMERICAN DJ® DEALER.

SPECIFICATIONS:

MODEL - Master Blaster-1000™

ELECTRONIC THERMO SENSING

WEIGHT: 18 LBS.

DIMENSIONS: 6.25" X 7.5" X 19"

FUSE: 10A AGC

SUPPLY VOLTAGE: 120V

WARM UP TIME: 5 Minutes

TANK CAPACITY: 1 Quart Removable

OUTPUT: 12,000 cubic feet per minute

FLUID TYPE: Water Base American DJ Fog Juice™

DUTY CYCLE: Not to exceed 6 hours turned on.

HEATER: 1000 WATT

CAUTION! Read instructions before attempting to install or operate.

MASTER BLASTER™

part of American DJ’s new

ccoommmmeerrcciiaallsseerriieess

fog machines with patented Electronic

Thermo Sensing (E.T.S.), for continuous heating regulation.

FFuunnccttiioonnss::

The new Commercial Series MASTER BLASTER™ fog machines all come with E.T.S., for

continuous heating-regulation. These foggers also carry a new innovation in fog machine

technology, user cleanable heaters. The MASTER BLASTER ™ operates via a 25 ft. wired,

timer remote control, that comes mounted into the unit. The remote may be removed, by

unscrewing the four (4) thumb screws that hold it to the base. The unit also contains a

removable, one quart reservoir.

EElleeccttrroonniiccTThheerrmmooSSeennssiinngg//EE..TT..SS..::

This feature allows you to have fog output available at almost any time. A small on board

micro processor constantly monitors the operating temperature of the fog machine. When

the fog machine drops ONE (1) degree in temperature the E.T.S., automatically senses this

change and turns the heater on to raise the temperature that one degree lost. This enables

the end user to have fog output at anytime. The only time fog will not be available, is at the

end of the machines duty cycle (The fog output was maxed out and the heater has to

reheat completely).

OOppeerraattiinnggaannddRReemmootteeIInnssttrruuccttiioonnss::

Plug your fog machine into a standard 110V/120V supply. The remote control comes con-

nected to the fog machine but can be removed to access the 25ft. cord. Make sure there is

an adequate supply of American Fog Juice™ in the fluid reservoir. Running the fog machine

dry will cause pump failure and or clogging. This is the largest cause of failure in fog

machines. Only American Fog Juice™ is recommended and not all fog juice is created

equal. Once the machine is plugged in and turned on, a red L.E.D. will indicate the unit is

receiving power. The unit has a warm up time of five (5) minutes. After the unit has warmed

up, a GREEN L.E.D on the remote will light indicating the unit is ready to emit fog. To emit

fog, simply press the green button on the remote for desired length of time. If the GREEN

L.E.D. is on and fog does not come out after holding the button down for 30 seconds, check

the fluid tank and hose to make sure there is fluid going through the hose. You can also

operate the fog output automatically by adjusting the timer settings on the remote.

The remote has three (3) L.E.D.s that indicate different functions; The YELLOW L.E.D. will indi-

cated the timer is turned on and is activated. The RED L.E.D. indicates power is on. The

GREEN L.E.D. indicates fog output is available. The remote also contains two rotary knobs.

The Duration knob serves two functions 1) Turns the timer on and off. 2) Sets the timers dura-

tion (Length of fog output). The interval knob sets the amount of time in between fog out-

put from 30 seconds to 10 minutes.

CCaauuttiioonn::BBeeffoorreerreemmoovviinnggoorrrreeppllaacciinnggtthheerreemmootteeuunniittddiissccoonnnneecctttthheeppoowweerrssuuppppllyy..

Affordable Quality Lighting Products from American DJ Supply, Inc. Los Angeles, CA. 90058 Page 2

Heater Service:

The MASTER BLASTER™ foggers all come with a unique and innovative removable heater

unit. This exciting feature allows the end user to remove and clean the heater core when it

becomes clogged or dirty.

SSeerrvviiccee::

AAllwwaayyssrreemmeemmbbeerrttooddiissccoonnnneecctttthheeppoowweerrssuuppppllyywwhheennsseerrvviicciinnggtthhiissoorraannyyuunniitt

2. Remove the heater core with a wrench.

3. With a wire brush, carefully clean off all corrosion and grime build up.

4. You may also soak the heater core in a bath of American Clean Machine. This will help

loosen the corrosion build up making it easier to scrub off with a wire brush.

5. Remove and replace the heater core gasket -

FFaaiilluurreettoorreeppllaacceetthheeoollddggaasskkeettwwiillllrreessuulltt

iinnffooggjjuuiicceelleeaakkiinnggffrroommtthheeffrroonnttoofftthheennoozzzzllee..

6. After you have removed all the corrosion build up and have replaced the gasket,

replace the heater core and tighten.

BBeessuurreennoottttoooovveerrttiigghhtteenntthheehheeaatteerrccoorree

7. Reconnect power supply.

TTrroouubblleeSShhoooottiinnggaannddSSeerrvviiccee::

If you experience low output, pump noise, or no output at all, disconnect immediately. Do

not attempt to continue pushing the remote button as this may damage unit. Check fluid

level, the external fuse, remote connection, and check power from wall. If all of the above

appear to be O.K., and the unit fails to operate correctly, the unit will require service. Return

the machine to an American DJ Authorized dealer or service center.

All commercial series,

MASTER BLASTER™

foggers carry a one year limited warranty.

We recommend you fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be freight pre-paid and

accompany a R.A. #. If the unit is under warranty, you must provide a proof of purchase

invoice.

Affordable Quality Lighting Products from American DJ Supply, Inc. Los Angeles, CA. 90058 Page 3

AMASTER BLASTER™

700 fogger shown with its

heater core removed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere American DJ Beleuchtungsausrüstung Handbücher

American DJ

American DJ INNO POCKET SPOT Bedienungsanleitung

American DJ

American DJ LED Matrix Bedienungsanleitung

American DJ

American DJ O-Dome Bedienungsanleitung

American DJ

American DJ Concept 2 Montageanleitung

American DJ

American DJ LED UV GO Bedienungsanleitung

American DJ

American DJ Laser Widow Bedienungsanleitung

American DJ

American DJ Nitro Bedienungsanleitung

American DJ

American DJ P64 LED Bedienungsanleitung

American DJ

American DJ FREQ Matrix Quad Bedienungsanleitung

American DJ

American DJ P64 LED Bedienungsanleitung

American DJ

American DJ Vizi Spot 5R Bedienungsanleitung

American DJ

American DJ Water Column/4 Bedienungsanleitung

American DJ

American DJ WiFly Wash Bar Bedienungsanleitung

American DJ

American DJ Arcbeam 150 Bedienungsanleitung

American DJ

American DJ FS-1000 Pro Followspo Bedienungsanleitung

American DJ

American DJ Mega Par Profile System Bedienungsanleitung

American DJ

American DJ Energy DMX Montageanleitung

American DJ

American DJ Laser Widow Bedienungsanleitung

American DJ

American DJ SUNRAY lll Bedienungsanleitung

American DJ

American DJ LS-80 Bedienungsanleitung

American DJ

American DJ Inno Pocket Spot Pearl Bedienungsanleitung

American DJ

American DJ X-Ray ll Bedienungsanleitung

American DJ

American DJ Trilogy Bedienungsanleitung

American DJ

American DJ Energy One Montageanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung