American DJ ULTRA SCAN 250 Bedienungsanleitung

Version 1.0

User manual

ULTRA SCAN 250

American DJ®

Table of contents

1. Safety instructions......................................................................................................... 3

2. Operating determinations ............................................................................................. 4

3. Description of the device .............................................................................................. 5

4.Installation ...................................................................................................................... 6

4.1Fitting/Exchanging the lamp....................................................................................... 6

4.2 Inserting/Exchanging rotating gobos......................................................................... 7

4.3 Rigging the fixture ..................................................................................................... 8

4.4 Connection to the mains............................................................................................ 8

4.5 DMX-512 connection/connection between fixtures ................................................... 9

5. DMX PROTOCOL.......................................................................................................... 10

6. Addressing................................................................................................................... 11

7. Control Board .............................................................................................................. 11

8. Main functions ........................................................................................................... 11

8.1 Special functions - calibration ................................................................................. 12

9.Technical specifications .............................................................................................. 12

10. Maintenance and cleaning ........................................................................................ 13

11. Appendix .................................................................................................................... 14

ULTRA SCAN

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFOREYOU INITIAL START - UP!

1. Safety instructions

Every person involved with installation and maintenance of this device have to:

-bequalilfied

- follow the instructions of this manual

CAUTION!

Be careful with your operations.With a high voltage you can suffer

a dangerous electric shock when touching the wires!

Thisdevicehasleftour premises in absolutelyperfectcondition.Inorder to maintain thisconditionandtoensure

asafeoperation,itis absolutely necessary fortheusertofollow the safety instructionsandwarningnoteswritten

in this manual.

Important:

Themanufacturerwillnot accept liabilityforanyresulting damagescausedbythenon-observance ofthis manual

or any unauthorized modification to the device.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

Neverlet thepower-cord comeinto contactwith othercables! Handlethe power-cordand allconnections with the

mains with particular caution!

Always plug in the power plug least. The power-plug has to be accessable after installing the device.

Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-

cord from time to time.

Alwaysdisconnectfrom themains, whenthe deviceis notin useor beforecleaning it. Onlyhandle thepower-cord

by the plug. Never pull out the plug by tugging the power-cord.

This device falls under protection class I.Therefore it is essential to connect the yellow/green conductor to earth.

The electric connection, repairs and servicing must be carried out by a qualified employee.

Do not connect this device to a dimmer pack.

Do not switch the fixture on and off in short intervals as this would reduce the lamp’s life.

During the initial start-up some smoke or smell may arise.This is a normal process and does not necessarily

mean that the device is defective.

Donot touch the device’s housing bare hands during its operation(housing becomes hot)!

For replacement use lamps and fuses of same type and rating only.

CAUTION ! EYEDAMAGES !

Avoid looking directly into the light source

(meant especially for epileptics) !

2. Operating determinations

This device was designed for indoor use only.

If the device has been exposed to drastic temperature fluctuation (e.g.after transportation), do not switch it on

immediately.Thearising condensation water might damage yourdevice.Leavethe deviceswitchedoff until ithas

reachedroomtemperature.

When taking the device into operation, please make sure that the housing is closed firmly with all the necessary

screwstightened up.

Never run the device without lamp!

Do not shake the device.Avoid brute force when installing or operating the device.

Whenchoosing the installation-spot, pleasemake sure that thedevice is not exposedto extreme heat, moisture

or dust.There should not be any cables lying around.You endanger your own and the safety of others!

Thesymbol determines the minimumdistance from lighted objects.Theminimum distancebetween light-

output and the illuminated surface must be more than 0.8 meters.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.

Always fix the fixture with an appropriate safety-rope.Fix the safety-rope at the correct holes only.

Onlyoperate the fixtureafter having checkedthat the housingis firmly closedand all screwsare tightly fastened.

The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may

explose and emit a high ultraviolet radiation, which may cause burns.

Themaximum ambient temperature

= 45° C must never be exceeded.Otherwise, the lamp isswitched off and

the fixture is out of operation for 5 minutes.

CAUTION!

The lens has to be replaced when it is obviously damaged,

so that its function is impaired, e. g. due to cracks or deep scratches!

Operate the device only after having familiarized with its functions. Do not permit operation by persons not

qualifiedfor operating the device. Most damages are the result of unprofessionaloperation!

CAUTION!

The lamp has to be replaced when it is damaged

or deformed due to the heat!

Wait at least 15 minutes before remowing the lamp.

Please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-

circuit, burns, electric shock, burns due to ultraviolet radiation, lamp explosion, crash etc.

3. Description of the device

Front panel:

1 - Fuseholder

2 - Powercord

3 - DMX input

4 - DMX output

Control board:

1 - Menu-button

2 - Up,Down buttons

3 - Display

1- Fixation screw for bracket

2 - Bracket

3 - Fastening screws

4- Objective

5- Mirror

4. Installation

4.1Fitting/Exchanging the lamp

DANGER !

Install the lamps with the device switched off only.

Unplug from mains before !

To insert the lamp (MSD/HSD 250 or MSD 250/2) open the small cover at the rear panel (see the drawing) by

loosening the 2 Phillips screws „A” and „B” on the cover.

Gently pull out the lamp assembly.

If changing the lamp, remove the old lamp from the socket.Insert the lamp to the socket.

Do not install a lamp with a higher wattage! A lamp like this generates temperatures the device is not designed for.

Damages caused by non-observance are not subject to warranty.Please follow the lamp manufacturer‘s notes!

Donot touch the glass-bulb bare hands during the installation! Make sure that the lamp is installed tightlyinto the

lampholdersystem.

Reinsert the lamp assembly and tighten the 2 screws again.

Do not operate this fixture with opened housing-cover!

Screw "B"

Screw „X”

Screw „Z”

Screw „Y”

Screw "A"

Lamp adjustment

The lampholder is aligned at the factory.Due to differences between lamps, fine adjustment may improve light

performance.

Strike the lamp and focus the light on a flat surface (wall). Center the hot-spot (the brightest part of the beam)

using the 3 adjustment screws „X,Y, Z”. Turn one screw at a time to drag the hot-spot diagonally across the

projected image.If you cannot detect a hot-spot, adjust the lamp until the light is even.

To reducea hot-spot, pullthe lampin byturning all three screws „X,Y,Z” clockwise¼-turnata time until the light

is evenly distributed.

If the light is brighter around the edge than it is in the center, or if light output is low, the lamp is too far back in the

reflector.„Push”the lamp out by turning the screws „X,Y,Z” counterclockwise ¼-turn at a time the light is bright

andevenly distributed.

4.2 Inserting/Exchanging rotating gobos

DANGER!

Instal the gobos with the device switched off only.

Unplug from mains before!

If you wish to use other forms and patterns as the standard-gobos, or if gobos are to be exchanged, please

follow the instructions below:

Remove the fixation-ring with an appropriate tool.Remove the gobo and insert the new gobo.Press the fixation-

ring together and insert it in front of the gobo.

CAUTION!

Never unscrew the screws of the rotating gobo

as the ball bearing will otherwise be opened!

4.3 Rigging the fixture

The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight for 1

hourwithout anyharming deformation.

The installation must always be secured with a secondary safety attachment, e.g.an appropriate catch net.This

secondary safety attachment must be constructed in a way that no part of the installation can fall down if the

main attachment fails.

Whenrigging, derigging orservicing the fixturestaying in the area below the installationplace, on bridges,under

highworking placesand otherendangered areas isforbidden.

The operator has to make sure thatsafety-relating and machine-technicalinstallations areapproved by an expert

before taking into operation for the first time and after changes before taking into operation another time.

The operator has to make sure thatsafety-relating and machine-technicalinstallations areapproved by an expert

after every four year in the course of an acceptance test.

Theoperator has to make sure that safety-relatingand machine-technical installations areapproved by a skilled

persononce a year.

The projector should be installed outside areas where persons may walk by or be seated.

Important!Overheadrigging requiresextensive experience, including (butnot limited to)calculatingworkingload

limits,installation materialbeingused, andperiodicsafetyinspection of allinstallation material and theprojector.

If you lack these qualifications, do not attempt the installation yourself, but instead use a professional structural

rigger.Improper installationcan result in bodily injuryand.or damage to property.

The projector has to be installed out of the reach of people.

If the projector shall be lowered from the ceiling or high joists, professional trussing systems have to be used.

The projector must never be fixed swinging freely in the room.

Caution: Projectorsmay causesevere injuries whencrashing down! If you havedoubts concerning thesafety of

a possible installation, do not install the projector!

Before rigging make sure that the installation area can hold a minimum point load of 10 times the projector’s

weight.

Danger of fire !

When installing the device, make sure there is no highly-inflammable

material (decoration articles, etc.) within a distance of min. 0,5 m.

Mounttheprojector withthe mounting-bracket to yourtrussingsystemusing an appropriate clamp.The holein the

mounting bracket has a diameter of 10 mm.

For overhead use, always install a safety-rope that can hold at least 10 times the weight of the fixture.You must

onlyuse safety-ropeswith screw-oncarabines. Pull thesafety-rope throughthe hole in the mounting-bracketand

over the trussing system etc.Insert the end in the carabine and tighten the fixation screw.

Adjust the desired inclination-angle via the mounting-bracket and fix the bracket-screws tightly.

Connect the fixture to the mains with the power-plug.

4.4 Connection to the mains

The earth has to be connected!

Connect the fixture to the mains with the enclosed power-plug.

The occupation of the connection-cables is as follows:

Cable Pin International

Brown Live L

Blue Neutral N

Yellow/Green Earth

DANGERTO LIFE!

Before taking into operation for the first time,

the installation has to be approved by an expert!

4.5 DMX-512 connection/connection between fixtures

The wires must not come into contact with each other, otherwise

the fixtures will not work at all,or will not work properly.

Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with the

fixture or one fixture with another.

Occupation of the XLR-connection:

DMX - output DMX-input

XLR mounting-socket: XLR mounting-plug:

Ifyou are using standartcontrollers,youcanconnect theDMX-output ofthe controllerdirectly with the DMX-input

of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you need to

useadapter-cables.

Building a serial DMX-chain:

Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always

connect one output with the input of the next fixture until all fixtures are connected.

Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ohm resistor

between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.

1-Ground

2 - Signal (-)

3 - Signal (+)

1-Ground

2 - Signal (-)

3-Signal (+)

5. DMX PROTOCOL

Channel Value Function Type of control

1 Pan

0-255 Control of the pan movement proportional

2 Tilt

0-255 Control of the tilt movement proportional

3 Colours

0 - 7 Open/white proportional

8 - 15 Red proportional

16 - 23 Blue proportional

24 - 31 Green proportional

32 - 39 Yellow proportional

40 - 47 Amber proportional

48 - 55 Lightgreen proportional

56 - 63 Turquoise proportional

64 - 71 Dark blue proportional

72 - 79 Cyan proportional

80 - 87 Pink proportional

88 - 95 Purple proportional

96- 103 UV proportional

104 - 111 Red/blue proportional

112 - 119 Yellow/Green proportional

120 - 127 Blue/purple proportional

128 - 190 Forwards rainbow effect from fast to slow proportional

191 - 192 Norotation step

193 - 255 Backwards rainbow effect from slow to fast proportional

4 Rotatinggobos

0 - 23 Open/hole step

24 - 47 Rot.gobo1 step

48 - 79 Rot.gobo2 step

80 - 103 Rot.gobo3 step

104 - 127 Rot.gobo4 step

128 - 151 Rot.gobo5 step

152 - 175 Rot.gobo6 step

176 -207 Rot.gobo7 step

208 - 231 Rot.gobo8 step

232 - 255 Rot.gobo9 step

5 Rotating gobo index,rotating gobo rotation

0 - 127 Goboindexing proportional

128 - 190 Forwards gobo rotation from fast to slow proportional

191 - 192 Norotation step

193 - 255 Backwards gobo rotation from slow to fast proportional

6 Shutter,strobe

0 Shutterclosed step

1 - 63 Gradual adjustment of the light intensity from 0 to 100% proportional

64 - 95 Shutteropen step

96 - 127 Strobe-effect fro slow to fast (max. 8 flashes/second proportional

128 - 139 Reset step

140 - 159 Shutter closed step

160 - 175 Pulse-effect in sequences with increasing speed proportional

176 - 191 Pulse-effect insequences with decreasing speed proportional

192 - 223 Random strobe-effect from slow to fast proportional

224 - 255 Shutteropen step

Inhaltsverzeichnis

Andere American DJ Beleuchtungsausrüstung Handbücher

American DJ

American DJ Big Shot LED Bedienungsanleitung

American DJ

American DJ Cinco Star Montageanleitung

American DJ

American DJ Inno Spot LED Bedienungsanleitung

American DJ

American DJ Eco UV Bar 50 IR Bedienungsanleitung

American DJ

American DJ Mega Bar LED RC Bedienungsanleitung

American DJ

American DJ Cosmic Bedienungsanleitung

American DJ

American DJ CW-12 System Bedienungsanleitung

American DJ

American DJ Sparkle Bedienungsanleitung

American DJ

American DJ Inno Color Beam LED Bedienungsanleitung

American DJ

American DJ 64B LED PRO Bedienungsanleitung

American DJ

American DJ Micro Galaxian Bedienungsanleitung

American DJ

American DJ LED Pixel 10C Bedienungsanleitung

American DJ

American DJ Neutron Star Bedienungsanleitung

American DJ

American DJ Fusion FX Bar 5 Bedienungsanleitung

American DJ

American DJ Mini Tri Ball II Bedienungsanleitung

American DJ

American DJ Dotz TPar System Bedienungsanleitung

American DJ

American DJ X-Color LED Bedienungsanleitung

American DJ

American DJ Revo III Bedienungsanleitung

American DJ

American DJ Ruby Beam Bedienungsanleitung

American DJ

American DJ Hyper Beam Montageanleitung

American DJ

American DJ Inno Color Beam Z19 Montageanleitung

American DJ

American DJ Laser Widow Bedienungsanleitung

American DJ

American DJ 64B LED PRO Bedienungsanleitung

American DJ

American DJ ENCORE FR20 DTW Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung