American DJ X-Treme/AS Bedienungsanleitung

American DJ®User Instructions

• New ZB-SC150 “Super Color” 150W, 4,000K 6,000Hr lamp

• 9 Dichroic Colors plus White

• 8 Gobos plus Spot on separate wheel

• 360 degree rotation of Gobo and Color Wheels

• DMX-512 Protocol

• Controlled by the X-Treme/19C™ or X-Treme/C™ Basic Controller

X-Treme/AS™ Features

The X-Treme/AS™ intelligent lighting fixture features a long life, extremely bright 150W arcstream lamp, 9 rich dichroic

colors plus white, 8 gobos plus spot, separate gobo/color wheels, and strobes in every color. 360 degree rotation of

gobo & color wheels with speed control provide a X-treme™ lighting show for club, concert, and mobile use. DMX-

512 protocol. Fan cooled. Also available in 220V operation. Controlled by the X-Treme/19C™ or X-Treme/C™. The

X-Treme/19C™: Programmable controller with 64 channel DMX-512 output; Ergonomic joystick control of pan/tilt motion;

56 professionally designed pan/tilt motions; 6 Show memories of 300 steps; Show memories can be chased for long

concerts; Instant manual override and control of all projectors and functions; Built-in gobo & color chases; and Quick,

intuitive modular programming. Control up to 16 heads. 120V or 220V operation. 3 space, 19 in. rack mount. The

X-Treme/C™: A basic controller that operates blackout; built-in programs; gobo/color change;

speed control of gobo/color wheels; and strobing. Control up to 8 heads. 120V or 220V operation.

X-Treme/AS™ Description

Voltage: 120V , 60 Hz

Dimensions: 22.75” x 9” x 6.5” / 740mm x 293mm x 212mm

Lamp: ZB-SC-150, 150W, 4,000K 6,000 hour lamp l

Weight: 27 lbs. / 12.3 kg.

Fuse: 5A

X-Treme/AS™ Specifications

HALOGEN LAMP WARNING!

This fixture is fitted with a halogen lamp

which is highly susceptible to damage if

improperly handled. Never touch lamp

with bare fingers as the oil from your

hands will shorten lamp life. Also, never

move fixture until lamp has had ample

time to cool. Remember, lamps are not

covered under warranty conditions.

Thank you for purchasing this American DJ® product. Some assembly required.

Please read the following instructions before installing or using your new unit.

X-Treme/AS ™

INTELLIGENT LIGHTING FIXTURE

©American DJ® Los Angeles Ca. 90058 - www.americandj.com - X-Treme/AS™ Page 1

Section 1

Inspection

Every X-Treme/AS™ projector was thoroughly tested and shipped in perfect condition. Carefully

unpack the projector and remove the bag with components from the carton. Inspect equipment for

shipping damage.

Packing list:

1. X-Treme/AS™ Projector

2. IEC power cord

3. Operating manual

Lamp Installation

Caution! Extremely hot! Always allow unit to cool before re-lamping

1. Loosen thumbscrews on back of unit. Slide out the lamp holder assembly.

2. Remove lamp from original packaging. Read the enclosed instructions. Lamp is

included with X-Treme/AS™ Projector Do not touch glass with bare hands as this

could damage the lamp.

3. Fit lamp Into holder

4. Slide lamp holder assemble back Into unit.

5. Tighten retaining screws

Projector Installation

1. Unit can be hung In any position.

2. Make sure to use a minimum 35Kg rated clamp.

3. Allow enough space on all sides for proper cooling.

4. Connect IEC power cord to back of unit.

5. Plug cord into property grounded socket.

*Check that the voltage marked on the back of unit is correct for your area.

6. Lamp will light and unit will reset and wait for signal from controller.

*The shutter is closed in stand-by mode, so it will be difficult to tell if the lamp is

lit without a controller.

* Unit may make smoke for a few minute until dust and excess paint is burned off by the lamp.

Precautions:

1.Never operate unit when case is open.

2.Never cover unit as this may block air vents and cause overheating and

possible fire hazard.

3. Never operate unit in the rain or in damp moist conditions as this could

cause electric shock.

4. Follow standard electrical safety precautions when installing, operating or

servicing the unit to prevent electrical shock, fire, or equipment damage.

5.These units are for commercial use and contain no user-serviceable parts inside.

Servicing must be conducted by qualified service personnel.

Getting Started

©American DJ® Los Angeles Ca. 90058 - www.americandj.com - X-Treme/AS™ Page 2

Lens Focusing

1. Hang fixture in its final position

2. Set Function DIP switch #6 to on.

3. Projector shutter will open and Pan and Tilt will be set to center and Gobo will be set to “small

spot”

4. Use a screwdriver to loosen the silver retaining screw .

5. Adjust lens until sharp focus is obtained.

Warning. Tighten screw securely. If screw Is not tight, the lens tube could slide out of the

fixture, causing equipment damage and or personal injury.

Section 2

DMX512 Operation

I. Connect the X-Treme/AS™ fixture to the X-Treme/C™, X-Treme/19C™ or any suitable

DMX-512 controller with a 3 pin XLR data cable.

2. Continue to connect together all the fixtures using 3 pin XLR data cables.

3. Set the DMX address for each fixture using the 9 pin DIP switch on the back panel fixture.

Each fixture uses 4 DMX-512 channels;

CH1: Color, CH2: Gobo 1; CH3: Pan; CH4: Tilt

You must select the proper DMX-512 address for each X-Treme/AS™ projector.

Below Is a chart of standard addressing for use with the X-Treme/C™ ,X-Treme/19C™ controllers.

DIP switch setting

Projector

DIP switch setting

Projector

1 2 3 4 5 6 7 8 9

412

1 2 3 4 5 6 7 8 9

614

7 15

816

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8 9

DMX-512 Addressing

©American DJ® Los Angeles Ca. 90058 - www.americandj.com - X-Treme/AS™ Page 3

These functions are designed to give you added convenience and power, making installation and pro-

gramming faster and easier.

Switch Off On

No. 1 Gobo positions Unlimited Gobo positions

No. 2 No Function No Function

No. 3 Normal Inverted Pan

No. 4 Normal Inverted Tilt

No. 5 Normal Self test

No- 6 Normal Focus

No. 7 Normal Auto Program

No. 8 Normal DMX-512 Termination

Function #1: "Off": Gobo wheel only stops at full and split color positions.

This makes programming and control much easier.

"On": Gobo wheat can be placed In any position for extreme control and special

effects.

Function #2: No Function

Function #3: "On" Inverts the Pan motion. Useful when projectors are mounted "head to head",

to allow the Mirrors to move in unison.

Function #4: "On" Inverts the Tilt motion. Useful when projector are mounted "head to head", to

allow the mirrors to move In unison.

Function #5: "On" X-Treme™ automatically runs through all the features one at a time. So you

can see every gobo and color and pan/tilt motion. Used when testing operation

of unit.

Function #6: "On" Makes focusing the X-Treme/AS™ easy. Opens the shutter and places the

"small spot" Gobo In the center for easy focusing without need of a controller.

Function #7: "On" Built-in demonstration program

Function #8: "On" DMX512 line termination, Used when this is the last projector of the DMX-5I2

chain.

Function Settings

©American DJ® Los Angeles Ca. 90058 - www.americandj.com - X-Treme/AS™ Page 4

Figure 1

XLR MALE SOCKET

1 EARTH Cold 2

3 Hot

XLR FEMALE SOCKET

1 EARTH

Cold 2

3 Hot

Figure 2

XLR Pin Configuration:

Pin 1 = Shield

Pin 2 = Data Compliment (negative)

Pin 3 = Data True (positive)

DMX TRAITS

VALUE COLOR - CHANNEL 1 VALUE GOBO - CHANNEL 2

0WHITE

167

160

144

128

112

191

220

208

200

164

140

128

179

110

255

232

255

239

227

215

203

BLUE

UV - PURPLE

WHITE

SLOW COLOR SCROLL

FASTER COLOR SCROLL

FASTEST COLOR SCROLL

RED

MAGENTA

FASTER STROBE

FAST STROBE

SLOW STROBE

FASTEST GOBO SCROLL

FASTER GOBO SCROLL

FAST GOBO SCROLL

SLOW GOBO SCROLL

BLACKOUT

BARS

TUNNEL

STAR

WAVE

BUBBLES

SEGMENTED CIRCLE

MULTI STAR

SMALL SPOT

SHUTTER OPEN - LARGE SPOT

SHUTTER CLOSED

ORANGE

GREEN

CYAN

YELLOW

PINK

VALUEPAN - CHANNEL 3VALUE TILT - CHANNEL 4

255

128

255

128

0FULL TOP POSITION

FULL RIGHT POSITION FULL BOTTOM POSITION

MIRROR - CENTER POSITIONMIRROR - CENTER POSITION

FULL LEFT POSITION

Data Cable (DMX Cable) Requirements:

Your fixture and your controller require a standard 3-pin XLR connector for data

input and data output. If you are making you own cables be sure to use standard

two conductor shielded cable (This cable may be purchased at almost all pro

sound and lighting stores). Your cables should be made with a male and female

XLR connector on either end of the cable (see Figure 1). Also remember that

DMX cable must be daisy chained and can not be “Y”ed or split.

Notice: Don not use the ground lug on the XLR connector. Do not connect

the shield conductor to the ground lug or allow the shield conductor to come in

contact with XLR outer casing. Grounding the shield could cause a short circuit

and erratic behavior.

Special Note: For excessive cable runs totaling 100ft. or more, we recom-

mend using a terminator of 80-100 ohms/.5w. Long cable runs can sometimes

cause erratic behavior. Terminators prevent excessive signal loss by mirroring

the signal back through the line, decrease the possibilities of erratic behavior.

©American DJ® Los Angeles Ca. 90058 - www.americandj.com - X-Treme/AS™ Page 5

Inhaltsverzeichnis

Andere American DJ Beleuchtungsausrüstung Handbücher

American DJ

American DJ mace Bedienungsanleitung

American DJ

American DJ MARVEL Bedienungsanleitung

American DJ

American DJ Mega Tripar Profile Bedienungsanleitung

American DJ

American DJ Inno Scan LED Bedienungsanleitung

American DJ

American DJ COLOR SWEEP Montageanleitung

American DJ

American DJ FREQ 16 Strobe Bedienungsanleitung

American DJ

American DJ Topaz 250 Montageanleitung

American DJ

American DJ Titan 250 Montageanleitung

American DJ

American DJ Tri Fecta Bedienungsanleitung

American DJ

American DJ 64B LED PRO Bedienungsanleitung

American DJ

American DJ Splitter Bedienungsanleitung

American DJ

American DJ Cross Flash Bedienungsanleitung

American DJ

American DJ Festive Light Pak Montageanleitung

American DJ

American DJ Tempest Bedienungsanleitung

American DJ

American DJ WIFLY PAR QA5 Bedienungsanleitung

American DJ

American DJ Water Column/4 Bedienungsanleitung

American DJ

American DJ Roto Balls Tri LED Bedienungsanleitung

American DJ

American DJ Verti Colo Bedienungsanleitung

American DJ

American DJ Emerald Beam Bedienungsanleitung

American DJ

American DJ FREQ 5 Strobe Bedienungsanleitung

American DJ

American DJ Pocket Scan Bedienungsanleitung

American DJ

American DJ Color Burst 8 DMX Bedienungsanleitung

American DJ

American DJ Accu Color 250 Montageanleitung

American DJ

American DJ Micro Galaxian Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung